CVS RSKP-1 Instruction Manual

RSKP-1

RS-232 KEYPAD

Instruction Manual

Thank you for purchasing one of our products. Please read this manual before using this
product. When using this product, always follow the instructions contained in this manual,
and pay attention to the safety information.

Do not expose this product to water, rain or moisture.

Doing this can result in electric shock or re.

Never take this product apart or try to modify it.

Doing so is very dangerous and could result in electric shock.

Do not store this product near open ame.

Do not use this product near open ame or place lit or ammable items, such as

candles, incense, ect., on it.

Do not place any containers lled with water or other liquids near this product.

Doing so could result in re or electric shock if the liquid spills and enters the product or
gets it wet. If a liquid spills near this product, unplug the product immediately.

Do not remove or insert the power supply with wet hands.

Doing so could result in electric shock.
Do not use the power supply in any of the following ways.

Doing so could result in re or electric shock.

Modifying or heating the power cable
Damaging the power cable
Bending or tugging on the power cable unnecessarily
Knotting or kinking the power cable
Setting heavy objects on the power cable

When moving this product , rst unplug the power supply from the outlet. Do not

tug the cable or move this product with the power supply plugged into the outlet.

Doing so could damage the cable, possibly resulting in re or electric shock.

To reduce the risk of electric shock, do not remove the cover.

No parts inside the product can be serviced by the user. If your product needs service
contact:

Compu-Video Systems Inc. at [phone].

Usage Environment

Avoid using or storing this product in areas such as those listed below. Doing so could
damage the product or cause it to malfunction.

Areas exposed to heat or ames

Humid areas and areas where water is used

Handling this product

Do not drop or apply a strong force to this product or any included or connected parts.

Do not spill liquids around or inside this product or drop ammable objects around or

inside it.

Power Supply

Only use the supplied power supply which is designed specically for this product.

Do not allow the plug to come into contact with metal or water.

This Product is not designed for contact medical use

Do not use this product for medical applications that could result in patient contact.

The information in this manual is believed to be accurate. It is intended for professional
end users having the skills to evaluate and use the data properly. Compu-Video assumes
no liability in connection with damages incurred while using this product.

P.O. Box 749 Peekskill, NY 10566 Tel: [phone] Fax: [phone] Web: www.compuvideosystems.com

Mounting:

Step 1: Remove the PC board from the back of the control panel by gently pulling each
away from the other.

Step 2: Hook up wires using the terminal block and set the scan rate using the pots.
(See wiring information on the next page.)

Step 3: Reattach the PC board to the keypad and make sure that it works properly before
continuing on to the next step.

Step 4: Place the PC board into the electraial box so that the Pin receiver is on the top
side.

Step 5: Attach the PC Board to the electrical box with two screws

Step 6: Line up the pins on the keypad with the pin receiver on the PC board and gently
slide them together make shore not to bend any pins.

Step 7: Test the keypad to make sure that it works before continuing on to the next step.

Step 8: Use screws on the Keypad plate to attach it to the pc board.

Note: The RSKP-1 ts snugly into a standard single bay electrical box found at any local
hardware store.

P.O. Box 749 Peekskill, NY 10566 Tel: [phone] Fax: [phone] Web: www.compuvideosystems.com

Fig. 1

Mounting

Rear View Of Key Pad

PC Board

Fig. 2

Mounting

P.O. Box 749 Peekskill, NY 10566 Tel: [phone] Fax: [phone] Web: www.compuvideosystems.com

Fig. 3

Wiring

FOUR CONDUCTOR COLOR CODE FOR WIRE:

Blue/white RS-232 out
White /Blue Ground for RS-232
Orange/White Positive 5Vdc in
White/Orange Power Ground

Use external power supply for older ARS units that do not provide power for keypads.
The Current 6V power pack can power up to 14 keypads. Stock keypads will not be
provided with power packs as the newer ARS switchers will provide power for the
keypads.

The keypads draw less than .7W@5Vdc.

2

1

4

3