CVS PIP-200 Instruction Manual

Thank you for purchasing one of our products. Please read this manual before using this product. When using this product, always follow the instructions contained in this manual, and pay attention to the safety information.
Do not expose this product to water, rain or moisture.
Doing this can result in electric shock or re.
Never take this product apart or try to modify it.
Do not store this product near open ame.
Do not use this product near open ame or place lit or ammable items, such as
candles, incense, ect., on it.
Do not place any containers lled with water or other liquids near this product.
Doing so could result in re or electric shock if the liquid spills and enters the product or gets it wet. If a liquid spills near this product, unplug the product immediately.
Do not remove or insert the power supply with wet hands.
Doing so could result in electric shock. Do not use the power supply in any of the following ways.
Doing so could result in re or electric shock.
Modifying or heating the power cable Damaging the power cable Bending or tugging on the power cable unnecessarily Knotting or kinking the power cable Setting heavy objects on the power cable
When moving this product , rst unplug the power supply from the outlet. Do not
tug the cable or move this product with the power supply plugged into the outlet.
Doing so could damage the cable, possibly resulting in re or electric shock.
To reduce the risk of electric shock, do not remove the cover.
No parts inside the product can be serviced by the user. If your product needs service contact:
Compu-Video Systems Inc. at (845) 737-7009.
Usage Environment
Avoid using or storing this product in areas such as those listed below. Doing so could damage the product or cause it to malfunction.
Areas exposed to heat or ames
Humid areas and areas where water is used
Handling this product
Do not drop or apply a strong force to this product or any included or connected parts.
Do not spill liquids around or inside this product or drop ammable objects around or
inside it.
Power Supply
Only use the supplied power supply which is designed specically for this product.
Do not allow the plug to come into contact with metal or water.
This Product is not designed for contact medical use
Do not use this product for medical applications that could result in patient contact.
The information in this manual is believed to be accurate. It is intended for professional end users having the skills to evaluate and use the data properly. Compu-Video assumes no liability in connection with damages incurred while using this product.
P.O. Box 749 Peekskill, NY 10566 Tel: (845) 737-7009 Fax: (845) 737-0426 Web: www.compuvideosystems.com
P.O. Box 749 Peekskill, NY 10566 Tel: (845) 737-7009 Fax: (845) 737-0426 Web: www.compuvideosystems.com
Fig. 1
Window Size
Start Of
Horizontal Split
Start Of
Vertical Split
The PIP-200 is a 2 camera video picture in picture screen splitter that does not require
any genlock feeds for the cameras. By using digital technology CVS is able to capture and synchronize one camera to another so that the pictures can be compressed and split. There are two compression sizes, 1/4 screen and 1/8 screen size. The size of the window and the location of the window (Fig. 1) are variable.
Camera Requirements: The PIP-200 will work with 1 Color or B/W camera for input 1 and
only a B/W camera for input 2 which is the digitized input. Both cameras must conform with RS-170A sync timing standards. This means they must also be interlaced with the
proper pulse widths and sync frequencies. It has been found that some of the less
expensive cameras while claiming to conform with RS-170A, actually do not. This can cause instability in camera 2’s picture. If you are unsure of the RS-170A sync standard, please contact Compu-Video Systems at 845-737-7009.
Set up:
To set up the screen splitter we recommend you use the following check list to make the process simple.
Fig. 2
Rear Panel Connections
Color or B&W Camera
B&W Camera
Loading...
+ 5 hidden pages