CVS PALS-8, PATS-4, CDA-43 Instruction Manual

PALS-8

8x1 Contact Closure

Video Switcher

Instruction Manual

Thank you for purchasing one of our products. Please read this manual before using this
product. When using this product, always follow the instructions contained in this manual,
and pay attention to the safety information.

P.O. Box 749 Peekskill, NY 10566 Tel: [phone] Fax: [phone] Web: www.compuvideosystems.com

Do not expose this product to water, rain or moisture.

Doing this can result in electric shock or re.

Never take this product apart or try to modify it.

Doing so is very dangerous and could result in electric shock.

Do not store this product near open ame.

Do not use this product near open ame or place lit or ammable items, such as

candles, incense, ect., on it.

Do not place any containers lled with water or other liquids near this product.

Doing so could result in re or electric shock if the liquid spills and enters the product or
gets it wet. If a liquid spills near this product, unplug the product immediately.

Do not remove or insert the power supply with wet hands.

Doing so could result in electric shock.
Do not use the power supply in any of the following ways.

Doing so could result in re or electric shock.

Modifying or heating the power cable
Damaging the power cable
Bending or tugging on the power cable unnecessarily
Knotting or kinking the power cable
Setting heavy objects on the power cable

When moving this product , rst unplug the power supply from the outlet. Do not

tug the cable or move this product with the power supply plugged into the outlet.

Doing so could damage the cable, possibly resulting in re or electric shock.

To reduce the risk of electric shock, do not remove the cover.

No parts inside the product can be serviced by the user. If your product needs service
contact:

Compu-Video Systems Inc. at [phone].

Usage Environment

Avoid using or storing this product in areas such as those listed below. Doing so could
damage the product or cause it to malfunction.

Areas exposed to heat or ames

Humid areas and areas where water is used

Handling this product

Do not drop or apply a strong force to this product or any included or connected parts.

Do not spill liquids around or inside this product or drop ammable objects around or

inside it.

Power Supply

Only use the supplied power supply which is designed specically for this product.

Do not allow the plug to come into contact with metal or water.

This Product is not designed for contact medical use

Do not use this product for medical applications that could result in patient contact.

The information in this manual is believed to be accurate. It is intended for professional
end users having the skills to evaluate and use the data properly. Compu-Video assumes
no liability in connection with damages incurred while using this product.

P.O. Box 749 Peekskill, NY 10566 Tel: [phone] Fax: [phone] Web: www.compuvideosystems.com

PALS-8 LOOPING SEQUENTIAL SWITCHER

INSTALLATION AND OPERATING INSTRUCTIONS.

The PALS-8 sequential switchers have the following features:

*Remote activated sequencing

*Home, Scan and Bypass control for each input
*NTSC and PAL color compatible
*Vertical interval switching
*UL listed power pack
*Low power consumption

Each switcher kit should contain each of the following items:

*Instruction sheet
*Power Pack
*Switcher

You will need to provide:

(1) 1/4” RCA phone plug, stereo or mono (RADIO SHACK #274-1539)
(X feet) of 1 pair wire to connect switcher to control relay contacts or
(N.O.) Normally Open Momentary Push Button

SYSTEM CONNECTIONS:

1) Connect the power supply to the switcher by pushing the power connector into the rear
of the switcher until it can go no further.

2) Plug in the power pack to a 115VAC source.

3) Wire the Phono Plug to the following diagram and install it in the connector on the front

of the switcher:

Sleeve

Tip

PHONE PLUG

For additional buttons, simply connect them in parallel

Momentary Relay or Button