CVS MTS-4 Instruction Manual
MTS-4
4x1 Mobile Video Switcher
Instruction Manual
Thank you for purchasing one of our products. Please read this manual before using this
product. When using this product, always follow the instructions contained in this manual,
and pay attention to the safety information.
Do not expose this product to water, rain or moisture.
Doing this can result in electric shock or re.
Never take this product apart or try to modify it.
Doing so is very dangerous and could result in electric shock.
Do not store this product near open ame.
Do not use this product near open ame or place lit or ammable items, such as
candles, incense, ect., on it.
Do not place any containers lled with water or other liquids near this product.
Doing so could result in re or electric shock if the liquid spills and enters the product or
gets it wet. If a liquid spills near this product, unplug the product immediately.
Do not remove or insert the power supply with wet hands.
Doing so could result in electric shock.
Do not use the power supply in any of the following ways.
Doing so could result in re or electric shock.
Modifying or heating the power cable
Damaging the power cable
Bending or tugging on the power cable unnecessarily
Knotting or kinking the power cable
Setting heavy objects on the power cable
When moving this product , rst unplug the power supply from the outlet. Do not
tug the cable or move this product with the power supply plugged into the outlet.
Doing so could damage the cable, possibly resulting in re or electric shock.
To reduce the risk of electric shock, do not remove the cover.
No parts inside the product can be serviced by the user. If your product needs service
contact:
Compu-Video Systems Inc. at (845) 737-7009.
Usage Environment
Avoid using or storing this product in areas such as those listed below. Doing so could
damage the product or cause it to malfunction.
Areas exposed to heat or ames
Humid areas and areas where water is used
Handling this product
Do not drop or apply a strong force to this product or any included or connected parts.
Do not spill liquids around or inside this product or drop ammable objects around or
inside it.
Power Supply
Only use the supplied power supply which is designed specically for this product.
Do not allow the plug to come into contact with metal or water.
This Product is not designed for contact medical use
Do not use this product for medical applications that could result in patient contact.
The information in this manual is believed to be accurate. It is intended for professional
end users having the skills to evaluate and use the data properly. Compu-Video assumes
no liability in connection with damages incurred while using this product.
P.O. Box 749 Peekskill, NY 10566 Tel: (845) 737-7009 Fax: (845) 737-0426 Web: www.compuvideosystems.com
P.O. Box 749 Peekskill, NY 10566 Tel: (845) 737-7009 Fax: (845) 737-0426 Web: www.compuvideosystems.com
Model # Of Inputs # Of Outputs Controls Special Features
MTS-4 4 1
Front Panal
Switches
Each switcher kit should contain each of the following items:
Instruction sheet
Switcher
This product will work with a negative or positive ground system. Any power source other
than a standard CVS supplied power supply must be fused on the (+) or “Hot” leg for
safety reasons. This product is designed to be used in the eld where normal AC power is
not available. Battery or solar sources are good as well as AC inverters.
1) Connect the power connector to the back of the switcher before applying the power to
the fused power source.
2) The “Scan Rate” Knob controls the speed at which the channels are selected.
3) SCAN; Place all of the switches in the center position. The LED’s (lights) will
sequence at the rate set by the knob.
4) BYPASS; By placing the switch up, that position will be skipped when the scan comes
to that position.
5) HOME; Will freeze the scan to the selected position. If more than one position is
selected, the higher number will be activated.
MTS-4: 4x1 Terminating Video only sequential switcher
Loading...