CVS CTS-2, CTS-4, CTS-8, CTS-16, CLS-4 Instruction Manual

Compu-Video Systems Inc.

Instruction Manual

C

S

V

The CTS Series

CTS-2 CTS-4 CTS-8
CTS-16 CLS-4 CLS-8
CLTS-4 CLTS-8

Thank you for purchasing one of our products. Please read this manual before using the this product.
When using this product, always follow the instructions contained in this manual, and pay close
attention to the safety information.

P.O. Box 749 Peekskill, NY 10566 TEL: [phone] Fax: [phone] Web: www.compuvideosystems.com

WARNING!

Do not expose this product to water, rain or moisture.

Doing this can result in electric shock or fire.

Never take this product apart or try to modify it.

Doing so is very dangerous and could result in electric shock.

Do not store this product near open flame.

Do not use this product near open flame or place lit or flammable items, such as candles,
incense, ect., on it.

Do not place any containers filled with water or other liquids near this product.

Doing so could result in fire or electric shock if the liquid spills and enters the product
or gets it wet. If a liquid spills near this product, unplug the product immediately.

Do not remove or insert the power supply with wet hands.

Doing so could result in electric shock.
Do not use the power supply in any of the following ways.
Doing so could result in fire or electric shock.
Modifying or heating the power cable
Damaging the power cable
Bending or tugging on the power cable unnecessarily
Knotting or kinking the power cable
Setting heavy objects on the power cable

When moving this product , first unplug the power supply from the outlet. Do not
tug the cable or move this product with the power supply plugged into the outlet.

Doing so could damage the cable, possibly resulting in fire or electric shock.

To reduce the risk of electric shock, do not remove the cover.

No parts inside the product can be serviced by the user. If your product needs service
contact

Compu-Video Systems Inc. at [phone].

Usage Environment

Avoid using or storing this product in areas such as those listed below. Doing so could
damage the product or cause it to malfunction.
Areas exposed to heat or flames
Humid areas and areas where water is used

Handling this product

Do not drop or apply a strong force to this product or any included or connected parts.
Do not spill liquids around or inside this product or drop flammable objects around or
inside it.

Power Supply

Only use the supplied power supply which is designed specifically for this product.
Do not allow the plug to come into contact with metal or water.

This Product is not designed for contact medical use

Do not use this product for medical applications that could result in patient contact.

P.O. Box 749 Peekskill, NY 10566 TEL: [phone] Fax: [phone] Web: www.compuvideosystems.com

Each switcher kit should contain each of the following items:

Instruction sheet
Power Pack
Switcher

1) Connect the power supply to the switcher by pushing the power connector into the rear of the switcher until
it can go no further.

2) Plug in the power pack to a 115VAC source. Turn on the switcher by rotating the “Scan Rate” Knob to the
right. The speed at which the channels are selected is adjusted by this knob.

3) SCAN; Place all of the switches in the center position. The LED’s (lights) will sequence at the rate set by
the knob.

4) BYPASS; By placing the switch up, that position will be skipped when the scan comes to that position.

5) HOME; Will freeze the scan to the selected position. If more than one position is selected, the higher

number will be activated.

CTS-2: 2x1 Terminating Video only sequential switcher
CTS-4: 4x1 Terminating Video only sequential switcher
CLS-4: 4x1 Looping Video only sequential switcher
CLTS-4: 4x1 Looping with internal terminators Video only sequential switcher
CTS-8: 8x1 Terminating Video only sequential switcher
CLS-8: 8x1 Looping Video only sequential switcher
CLTS-8: 8x1 Looping with internal terminators Video only sequential switcher

SYSTEM CONNECTIONS:

INPUTS

OUTPUT

POWER

P.O. Box 749 Peekskill, NY 10566 TEL: [phone] Fax: [phone] Web: www.compuvideosystems.com

CTS-8 Shown