Cutler Hammer, Div of Eaton Corp SPD Series Catalog

Eaton’s SPD Series for integration into
electrical distribution equipment

Technical Data TD01005006E

Effective August 2009

Feature package options

The SPD Series provides users with the option of selecting between
three feature packages. These feature packages are the basic,
standard, and standard with surge counter. The proper feature
package can be selected based on the requirements of the
application or specification.

Table 1. Feature Package Comparison

Standard

Feature Basic Standard

Surge protection using thermally
protected MOV technology

Dual-colored protection status indicators
for each phase

Dual-colored protection status indicators
for the neutral-ground protection mode

Audible alarm with silence button

Form C relay contact

EMI/RFI filtering, providing up to 50 dB of
noise attenuation from 10 kHz to 100 MHz

Surge counter with reset button

✔✔✔

✔✔✔

✔✔✔

✔✔

✔✔

✔✔

with Surge
Counter

✔

Remote display mounting option

The SPD Series offers the option of mounting its display remotely
from the device. This is useful for applications where OEMs or other
integrators would like to embed the unit within a piece of equipment
and still be able to view its display.

SPD Series unit catalog numbers ending with ‘B’ (refer to catalog
number configuration on Page 7) should be ordered for applications
where the display is to be mounted remotely. These units include
the SPD Series unit and the remote display panel.

In addition to the unit itself, a remote display cable will have to be
purchased. Remote display cables are available in 4, 8, and 12 foot
lengths.

Existing SPD Series units previously installed without a remote
display also have the capability of mounting their displays remotely
from the device. Complete remote display kits are available that
contain all items required to mount the display remotely, including
the remote display cable. Remote display kits are available in 4, 8,
and 12 foot cable length options.

Table 3. Remote Display Kits

Description Catalog Number

Remote display kit with 4 ft remote display cable
Remote display kit with 8 ft remote display cable
Remote display kit with 12 ft remote display cable

SPDRDKIT04
SPDRDKIT08
SPDRDKIT12

For the dimensions of the cutout required to accommodate the
remote display panel, see Figure 1 below.

Dimensions

5.38 (136.7)

2.69 (68.3)

8.90

(226.1)

9.38

(238.3)

Table 2. Remote Display Cables

Description Catalog Number

4 ft remote display cable
8 ft remote display cable
12 ft remote display cable

ote: N Integrated units factory-installed with Eaton switchgear assemblies do
not require the purchase of a remote display cable. The cable is provided and
all required mounting is performed at the factory.

SPDRDCAB04
SPDRDCAB08
SPDRDCAB12

4.45

(113.0)

4x R0.06 (1.6)

2.53 (64.3)

5.06 (128.6)

4.69

(119.1)

6x 0.13 (3.3)

Figure 1. Dimensions of the Cutout Required to Accommodate
the Optional Remote Display Panel

EATON CORPORATION

3