Cutler Hammer, Div of Eaton Corp E26 Series Dimensional Sheet
October 2005
Mounting
Stacklight bases may be mounted
without the use of extension tube
or mounting base. If additional height
is required, choose 0.8 inches to
Stacklights
E26 Series
Dimensions
30 inches (20 – 760 mm) extension
tubes that fit between the mounting
base and stacklight base. The extension tubes are threaded with 3/4" NPT
1-11
threads, allowing for direct connection
to conduit fittings or threaded holes
without the use of a mounting base.
Customer
Supplied
Customer
Supplied
Base Mounting
0.18 (4.6) Dia.
or #8–32 Thread
or (M4 x 0.7)
0.87
(22.1)
Stacklight
Base
Mounting
Gasket
Panel
Dia.
Set Screw
Recommended
Tightening Torque
Is 7 in-lb
(0.79 Nm)
0.18 (4.6) Dia.
or #8–32 Thread
or (M4 x 0.7)
O-Rings
Extension
Tube
Mounting
Base
Mounting
Gasket
Panel
Utilizing Extension
Tube and Mounting Base
1.92 (48.8)
Dia.
Stacklight
Base
0.87
(22.1)
Tightening Torque
(Use Rubber-Jawed
Pliers for Installation
to Avoid Scratching the
Black Anodized Coating)
Dia.
Set Screw
Recommended
Is 7 in-lb
(0.79 Nm)
Utilizing Extension Tube and
3/4 inch (19.1 mm) Conduit Hub
1.06
(27)
Stacklight
Base
O-Rings
Extension
Tube
Myers Type
ST-2 or
ST-2CP Hub
Panel
Dia.
1
1.75 (44.5)
or 1.65 (42.0)
Base Mounting
0.20 (5.08) Dia.
or #10–32 Thread
or (M5 x 0.7)
120°
3-Hole Mounting for E26S108
2.12 (53.8)
Dia.
90°
0.87
(22.1)
Dia.
3/4 inch (19.1 mm) Conduit
Hub for E26S104
4-Hole Mounting for E26S109
Figure 1-2. Mounting Options and Dimensions in Inches (mm)
Stacklight base and gasket are supplied as standard with two sets of base mount holes.
One set with centre-to-centre spacing of 1.75 inches (44.5 mm) and another set with centre-to-centre spacing of 1.65 inches (42 mm).
CA08102001K07 For more information visit: www.EatonElectrical.ca
1-12
Stacklights
E26 Series
October 2005
Dimensions
Dimensions
2.56 (65)
1
0.59 (15)
2.72 (69)
1.73 (44)
2.56 (65)
Light
Unit
Base
Standard
2.24 (57)
2.72 (69)
1.73 (44)
Figure 1-3. Approximate Dimensions in Inches (mm) — One-Light Unit Stacklight
2.24 (57)
2.72 (69)
0.59 (15)
2.72 (69)
2.56 (65)
Light
Unit
Alarm
Light
Unit
Base
With Alarm
2.56 (65)
Alarm
Light
Unit
2.56 (65)
0.59 (15)
2.72 (69)
2.72 (69)
1.73 (44)
With Xenon Flasher
0.59 (15)
2.72 (69)
2.72 (69)
Xenon
(2 High)
2.56 (65)
Xenon
Light
Unit
(2 High)
Light
Unit
Base
2.56 (65)
0.59 (15)
2.72 (69.1)
Standard
2.56 (65)
0.59 (15)
2.72 (69.1)
2.72 (69.1)
Xenon
Figure 1-6. Approximate Dimensions
in Inches (mm) — Light Modules
Cover included with stacklight base.
2.72 (69)
1.73 (44)
Light
Unit
Base
2.72 (69)
1.73 (44)
Light
Unit
Base
2.72 (69)
1.73 (44)
With Xenon FlasherWith AlarmStandard
Figure 1-4. Approximate Dimensions in Inches (mm) — Two-Light Unit Stacklight
0.59 (15)
2.72 (69)
2.72 (69)
2.72 (69)
0.59 (15)
2.72 (69)
2.72 (69)
2.56 (65)
Light
Unit
Light
Unit
2.24 (57)
2.72 (69)
2.72 (69)
2.56 (65)
Alarm
Light
Unit
Light
Unit
2.72 (69)
1.73 (44)
Light
Unit
Base
2.72 (69)
1.73 (44)
Light
Unit
Base
2.72 (69)
1.73 (44)
Light
Unit
Base
2.56 (65)
Xenon
Light
Unit
(2 High)
Light
Unit
Light
Unit
Base
Standard
With Alarm
With Xenon Flasher
Figure 1-5. Approximate Dimensions in Inches (mm) — Three-Light Unit Stacklight
For more information visit: www.EatonElectrical.ca CA08102001K07
Loading...