Cutler Hammer, Div of Eaton Corp DA1 Product Flyer
PowerXL Series
DA1 high-performance compact variable frequency drives
Compact solution for your demanding applications
The Eaton DA1 variable frequency drive is compact and
simple to mount and install. With 200% torque ratings
and encoder feedback features, the DA1 drive is ideal for
demanding OEM applications. Unique capabilities standard
with the DA1 drive, including high safety functionality,
SmartWire-DT connectivity and permanent magnet
motor compatibility, truly make this an advanced microdrive with an expanded application range.
Features
•
High overload capability:
150% for 60 sec, 200% for
4 sec
•
Integrated Modbus RTU
and CANopen
•
Standard IP20 protection
•
Integrated PID controller
•
V/Hz, sensorless vector (SLV)
and closed-loop vector (CLV)
control
•
On-board I/O:
• 5 inputs (3 DI and 2 DI/AI)
• 2 outputs (2 AO/DO)
• 2 relay outputs
•
Plug-in modules to expand I/O
•
Optional high protection
degree (IP66)
•
Higher ambient
temperature: +50 °C
•
Safe torque off (STO) function
•
Standard conformal-coated
boards
•
Contactor style wiring
•
Optional communication cards
integrated in the drive:
• EtherNet I/P
• DeviceNet
• PROFIBUS DP
• PROFINET
• Modbus TCP
• BACnet
• EtherCAT
Bene ts
•
Easy menu navigation
•
Ease of control wiring—
detachable terminal pad
•
Lean connectivity through
use of SmartWire-DT
•
Standard RFI filter and brake
chopper circuit
•
PC tool for easy configuration
•
Unique functional block PLC
programming capability
•
Works with permanent
magnet motor
Product range
•
1–3 hp at 230 V (single-phase
in and three-phase out)
•
1–7.5 hp at 230 V (three-phase
in and three-phase out)
•
1–15 hp at 480 V (three-phase
in and three-phase out)
•
1–20 hp at 600 V (three-phase
in and three-phase out)
Catalog numbering system
DA1 - 1 2 4D1 F B - A 20 C
DA1 = Variable frequency drive, compact, Series 1
1 = Single-phase mains connection/three-phase motor connection
3 = Three-phase mains connection/three-phase motor connection
Device Series
(D = Drives, A = Advanced, 1 = Series 1)
Connection in Power Section
Mains Voltage Category
2 = 230 V (200–240 V ±10%)
4 = 400 V (380–480 V ±10%)
5 = 575 V (500–600 V ±10%)
Operational Current
Examples—
2D2 = 2.2 A
4D1 = 4.1 A
024 = 24 A
Dimensions
Approximate dimensions in inches (mm).
Product
Dimensions
FR2 9.09 x 4.21 x 7.32 (231.0 x 107.0 x 186.0)
FR3 10.75 x 5.16 x 8.03 (273.0 x 131.0 x 204.0)
Input ratings
Description Specification
Input voltage (Vin) 200–240 V, 380–480 V, ±10%
Input frequency (fin) 50–60 Hz (variation up to 48–62 Hz)
Short-circuit withstand rating 100 kAIC
Rated
Type
C = Coated printed circuit boards
Degree of Protection
20 = IP20/NEMA
66 = IP66/NEMA 4X
6S = IP66 with disconnect/NEMA 4X
Display Unit (Display)
A = LED display
Brake Chopper
B = Brake chopper
EMC (Radio Interference Suppression Filter)
N = No internal RFI lter
F = Internal RFI lter
®
0
Output ratings
Description Specification
Output voltage 0 to Vin
Overload 1.5 x Ie (1 min / 10 min)
2.0 x Ie (4 sec / 40 sec)
Output frequency 0–500 Hz (standard)
Frequency resolution 0.1 Hz
Ambient conditions
Description Specification
Operating temperature –10 °C to +50 °C (–10 °C to +40 °C for IP66)
Storage temperature –40 °C to +60 °C
Relative humidity 0–95% RH, noncondensing, non-corrosive
Altitude 100% load capacity (no derating) up to
3280 ft (1000 m); 1% derating for each
328 ft (100 m) above 3280 ft (1000 m)
Maximum altitude is 13,123 ft (4000 m)
Eaton
1000 Eaton Boulevard
Cleveland, OH 44122
United States
Eaton.com
© 2014 Eaton
All Rights Reserved
Printed in USA
Publication No. PA039001EN / Z15456
July 2014
Eaton is a registered trademark.
All other trademarks are property
of their respective owners.
Loading...