Cutler Hammer, Div of Eaton Corp A200 Catalog Page
A200 NEMA Contactors and Starters
8
A200
Starters — Non-reversing and Reversing
January 2006
Contents
Description Page
Starters — Non-reversing and
Reversing . . . . . . . . . . . . . . . . . 8
Product Description —
Sizes 00 – 4 . . . . . . . . . . . . . 8
Product Description —
Sizes 5 – 9 . . . . . . . . . . . . . . 8
Features and Benefits . . . . . . 9
Instructional Leaflets . . . . . . . 9
Dimensions and
Shipping Weights . . . . . . . . 10
Product Selection —
Non-reversing,
Sizes 00 – 9 . . . . . . . . . . . . . 13
Product Selection —
Reversing,
Sizes 00 – 9 . . . . . . . . . . . . . 14
Starters — Two-Speed. . . . . . . . 15
Technical Data. . . . . . . . . . . . . . . 16
Factory Modifications . . . . . . . . 20
Accessories and Field
Modification Kits . . . . . . . . . . . 20
Renewal Parts . . . . . . . . . . . . . . 23
Size 1 Starter
Product Description —
Sizes 00 – 4
Application
Magnetic starters are used for fullvoltage, across-the-line starting and
stopping of squirrel cage motors. They
can be operated locally or remotely by
manual or automatic pilot devices.
NEMA Sizes 00 – 4;
Three-Phase, 1-1/2 – 100 hp
These Cutler-Hammer® Starters from
Eaton’s electrical business use Class
A201 contactors as described on
Page 2. Contactor features are
enhanced through the ability to provide positive motor protection in the
form of several types of overload
relays. See Pages 28 – 36.
Type B Overload Relay, Manual Reset Only
Supplied as standard on Class A200
and A900 starters (two-speed). The bimetallic overload relay offers ambient
compensation and trip-to-test feature
(relay contact status check) as standard. In addition, an isolated normallyopen contact is available in kit form for
customer mounting. Type B overload
relays are manual reset only.
Type A Overload Relay, Manual
or Automatic Reset
This is an optional overload relay,
offering the capability of field conversion to automatic reset. It is available
as an ambient compensated or noncompensated type.
Non-reversing Starters
Non-reversing starters are supplied as
open devices. All starters are supplied
with a normally-open holding circuit
interlock.
Class A200 starters are available as UL
listed or recognized components, as
well as with CSA certification.
Reversing Starters
For reversing applications (Class
A210), a starter and a contactor electrically and mechanically interlocked are
supplied on a common baseplate.
Reversing starters are used to start,
stop and reverse AC squirrel cage
motors and for primary control of
reversing wound-rotor motors.
For plugging or inching, when operations exceed five times per minute,
decreased horsepower ratings in
accordance with NEMA Standard ICS
2-321 are recommended.
Two-Speed Starters, A900s
For across-the-line starting of twospeed constant hp, constant torque
and variable torque squirrel cage
motors, two-speed starters (Class A900)
are available. These Cutler-Hammer
starters consist of two starters, one for
each motor speed, mechanically and
electrically interlocked and wired for
manual speed selection by means of
pushbuttons. Auxiliary relays may be
added to provide automatic acceleration or deceleration.
Starters for two-speed, two independent winding motors consist of two-,
three- or four-pole starters electrically
and mechanically interlocked. Starters
for two-speed, single reconnectable
winding motors consist of one threepole and one five-pole starter mechanically and electrically interlocked.
Size 5 Starter
Product Description —
Sizes 5 – 9
NEMA Sizes 5 – 9;
Three-Phase 75 to 1600 hp
Non-reversing (Class A200), and
reversing (Classes A210, A250) full
voltage starters are used for acrossthe-line starting of squirrel cage induction motors. They are used with
motors rated above 50 hp at 230V, and
above 100 hp at 460 through 600V.
Sizes 5 and 6 Cutler-Hammer starters
use Class A201 contactors as described
on Page 3. In addition to standard
motor starters, special application
devices are available: Sizes 5 and 6
starters with integrally rectified AC to
DC coils for applications where low
voltage problems are prevalent are
available.
Class A200 starters are UL listed
and recognized and also carry CSA
certification.
Front Removable Parts — All operating parts can be removed quickly and
easily from the front. Straight-through
wiring and conveniently located connection points for external wires and
cables minimize installation time.
Type B Block Type Thermal Overload
Relay — Dependable overload protec-
tion is assured by these snap-action,
manual reset relays. Automatic reset
Type A relays are available as an
option.
Technical Data . . . . . . . . . . . . . . . . . Pages 16 – 19
For more information visit: www.EatonElectrical.com CA03303001E
January 2006
A200 NEMA Contactors and Starters
A200
Starters — Non-reversing and Reversing
9
Types of Starters
Class A200, Sizes 5 and 6 — Non-
reversing starters contain an AC
magnetically-operated Size 5 or Size 6
line contactor and block Type B three-
pole overload relay, along with three
current transformers. A control relay
whose contacts handle the coil current
of the starter is provided with Size 6
starters.
Class A200, Sizes 7, 8 and 9 — Non-
reversing starters contain a DC
operated line contactor, DC power sup-
ply, block Type B three-pole overload
relay with three current transformers
and a control relay.
Class A960/A970/A980 Multi-Speed
Starters: Refer to Page 15.
Features and Benefits
Sizes 00 – 4
■ Straight-Through Wiring, Up-Front,
Out-Front Terminals for ease in
installation.
■ Unique Accessory Mounting
Cavities reduce panel space
requirements.
■ Snap-in Accessories for application
flexibility.
■ Vertical and Horizontal Interlocking
capability increases application
flexibility.
■ Ambient Compensated Overload
Relays available as standard, offering superior motor protection in
variable motor/controller
environments.
■ Isolated Normally Open Relay
Contact available in kit mounting
form on Type B Overload Relay.
Sizes 5 – 9
■ Rectified AC/DC Coils available
to reduce premature drop-out or
“kiss” problems due to inherent low
voltage conditions.
■ Clapper Design armature assembly
pivots on needle bearings resulting
in quick, smooth opening and closing of the magnet.
■ Stainless Steel Kick-Out Spring
assures quick, positive drop-out
time.
■ Front Removable Parts all current
carrying parts front removable for
easy inspection and maintenance.
Instructional Leaflets
16958 Sizes 00 – 1, 3-Pole Motor
Controller
16956 Sizes 00 – 1, 2-Pole, Single-
Phase Motor Controller
16959 Size 2, 3-Pole Motor
Controller
16957 Size 2, 2-Pole, Single-Phase
Motor Controller
15465C Sizes 3 and 4J Motor
Controller
17000C Size 4, Model K Motor
Controller
17054C Size 5 Motor Controller
17055C Size 6 Motor Controller
CA03303001E For more information visit: www.EatonElectrical.com
Technical Data. . . . . . . . . . . . . . . . . . Pages 16 – 19
Loading...