Curtis TCN Instructions And Parts List

1A

Instructions and Parts List – TCN

Instructions and Parts List – TCN

1

2

5

6

3

11

OPTIONAL
FAUCET

ITEM PART Nº DESCRIPTION

1

1A

2

3

4

WC-56036

WC-61436

WC-38471

WC-37260

WC-1803

LID, PLASTIC TCN

LID, BLACK PLASTIC (OLD)

LABEL, FRONT TCN GENERIC

KIT, FAUCET W/ADAPTER CMPLT

FAUCET, SPB

7

8

9

10

4

ITEM PART Nº DESCRIPTION

6

7

8

9

10

WC-1805

WC-3289

WC-38163

WC-5686

WC-3531

SEAT CUP, FAUCET S'

HANDLE, GASKET

LABEL, CURTIS SWP CLR/WHT

DRIP TRAY, OCTAGON STYLE

LEG, PLASTIC GLIDE TCN

5

WC-3707

WILBUR CURTIS COMPANY, INC.

6913 Acco Street, Montebello, CA 90640-5403
Telephone: [phone]
Fax: [phone]

10/2/9 . 12.5 . ecn 10624
11/7/7 . 16.0 . ecn 9364
10/10/07 . 12.1 . ecn 9301
8/10/04 . 12.3 . edr 4105

KIT, REPAIR SPB FAUCET

11

WC-1840

FAUCET, PINCH TUBE TC

find the latest on the web at
www.wilburcurtis.com

10/09 . F-3639 . rev C

DAILY CLEANING

Before brewing into the tea container, wash the inside with a mild solution of dish soap and water.
Rinse with clear water. Open the faucet, draining any remaining rinse water.

Wipe any spills, dust or debris from the exterior surfaces with

1.

a damp cloth.

Wash the tea container.

2.

A. Clean inside the container and top cover with a mild
detergent solution.
B. Remove the faucet assembly by unscrewing the wing nut.
C. Unscrew the bonnet assembly from the faucet. Clean
inside the faucet body. Run a circular brush through the
spout and the back of the faucet.
D. Disassemble the bonnet/handle assembly by unhooking
the handle from the shaft. Thoroughly clean these parts.*
E. Clean the shank assembly (still on the container) by
pushing the through with a circular brush.
F. Dry the parts that were cleaned. When parts are dry,
return them to the tea container.

Unlock the shaft from the
handle. Compress the spring,
pressing down on the bonnet
then unhooking the handle.

3.

After cleaning, the outside surfaces of the server should be
wiped down with stainless steel polish to clean, polish and
prevent scratches.

* While the handle parts are disassembled, check the condi­tion of the seat cup. Replace it if you observe any tears or if
the silicone has hardened.
The pinch tube style faucet will not have a seat cup; all other
parts are similar.

HANDLE

BONNET

SPRING

SHAFT

SEAT CUP

Clean these faucet parts.

10/09 . F-3639_rev C