Curtis STT102 User Manual

1

INSTRUCTION MANUAL

Splendid real time

2

IMPORTANT SAFETY INSTRUCTIONS

When using electrical products, basic precautions should always be followed. Please refer below:

1. Read Instructions - All safety and operating instructions should be read before operated.

2. Retain Instructions - Safety and operating instructions should be retained for future reference.

3. Follow Warnings - All warnings on the product and in the manual should be adhered to.

4. Follow Instructions - All operating and user instructions should be followed.

5. Cleaning - Do not use liquid or aerosol cleaners instead use a damp cloth for cleaning.

6. Attachments - Do not use attachments not recommended by the product manufacturer as they may cause
hazards.

7. Water and Moisture - Avoid exposing the product to water and moisture.

8. Accessories - Securely place this unit before use. The product may fall if not properly placed causing serious
injury to a child or adult and may damage the product.

9. Transporting - This product should be moved with care to avoid damage or injury.

10. Ventilation - Slots and openings in the cabinet are provided for ventilation. This is to
ensure reliable operation of the product and to protect it from overheating. Openings
must not be blocked or covered. This product should not be placed in a built-in
installation such as a bookcase or rack unless proper ventilation is provided

11. Power Sources - This product should be operated only from the type of power source
indicated on the marking label. If you are not sure of the type of power supply to your
home, consult your product dealer or local power company. For products intended to
operate from battery power, or other sources, refer to the instruction manual.

12. Object and Liquid Entry - Never push objects of any kind into this product through openings as they may touch
dangerous voltage points or short-out parts that could result in a fire or electric shock.

13. Servicing - Do not attempt to repair this product yourself as opening or removing covers may expose you to
dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

14. Damage Requiring Service - Unplug this product and refer servicing to qualified service personnel under the
following conditions:
a. If liquid or objects have fallen into the product.
b. If the product has been exposed to rain or water.
c. If the product does not operate and you have followed the manual for troubleshooting.
d. If the product has been dropped or damaged in any way, and the product exhibits a distinct change in
performance.

15. Replacement Parts - If a part needs to be replaced, be sure the service technician has used replacement parts
specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions
may result in fire, electric shock, or other hazards.

16. Safety Check - Upon completion of any service or repairs to this product, ask the service technician to perform
safety checks to determine that the product is in proper operating condition.

17. heat - The product should be situated away from heat sources such as radiators, heat registers, stoves or
other products (including amplifiers) that produce heat.

PRECAUTIONS

1. Be sure to unplug the unit if you do not intend to use it for a long period of time.

2. Incorrect use of controls, adjustments and performance other than those specified herein may result in
hazardous radiation exposure.

3

1. Turntable Plater

2. 45 RPM Adapter Holder

3. Tone Arm

4. Lift lever

5. 33 / 45 / 78 RPM Switch

6. Manual & Auto stop switch

7. Battery charging LED

8. Power Led Indicator

9. Power & volume control knob

10. Tone Arm Rest and Lock

11. Cartridge & protector

12. Lock

13. Handle

14. Speakers

15. RCA output Jack

16. USB Jack

3. Should this product malfunction, discontinue use and contact a qualified service center.

WARNING

To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.

CAUTION

RISK OF ELECTRIC SHOCK- DO NOT OPEN!

To reduce the risk of electric shock, do not remove casing.
No user serviceable parts inside. Refer servicing to qualified service personnel.
The light flash with arrowhead symbol, within an equilateral triangle, is intended to alert Users to

the presence of “dangerous voltage” which may be of sufficient magnitude to cause electric shock
to persons.
The exclamation point inside an equilateral triangle is intended to alert Users to the presence of
important operating and maintenance (servicing) instructions in the literature that may accompany
the appliance.

BEFORE USE

1. Choose a safe location and avoid placing the unit in direct sunlight or near any heat source.

2. Avoid locations subject to vibrations, excessive dust, cold or moisture.

3. Do not open the unit as this may result in electrical shock. If a foreign object is inserted accidentally contact
your dealer.

4. Do not attempt to clean the unit with chemical solvents as this might damage the finishing. A clean, dry cloth is
recommended for cleaning.

TURNTABLE PARTS

4

Charging the Battery

This Turntable has a built-in rechargeable lithium–ion battery which can provide up to 3 hours of
continuous use. To charge the battery, please connect the turntable to your computer by using the
USB cable. The battery will charge automatically. During the period of charging, the indicator reminds
green. When charging is complete, the green indicator LED will turn off.

Listening to a Record

1. Lift the buckle on the front of the turntable and open the lid.

2. Turn the power & volume control knob clockwise. The red LED will light to show that the turntable is
turned on. The green LED will light if the internal battery is charging. Once charging is complete, the
green LED will turn off.

3. Place a record on the turntable and select the player speed (33/45/78) according to the desired
record speed. NOTE: when playing a 45 rpm record, use the included 45 rpm adapter.

4. Open the tone arm clip to release the tone arm. Push the lift lever backward to raise the tone arm
and gently move the tone arm to the desired position over the record.
The turntable will begin to spin when the arm is moved toward the record. Push the lift lever forward
lower the tone arm slowly onto the desired position on the record to begin playing the record. Please
note: The record will begin to spin only when the tone arm is moved over the record if the Auto Stop is
turned on.

5. If the Auto Stop Control is turned ON, the record will stop automatically when finished. If Auto Stop
Control is turned OFF, record will NOT stop automatically when finished.

6. For best performance and product maintenance, unplug the turntable when not in use.

TURNTABLE STYLUS (needle) REPLACEMENT

To replace the turntable stylus (needle), please refer to the instructions below:

-Removing the stylus from the cartridge

1. Place a screwdriver at the tip of the stylus and push downward as shown in direction “A”.

2. Remove the stylus by pulling the stylus forward and pushing downward.

-Installing the stylus (needle)

1. Hold the tip of the stylus and insert the stylus by pressing as shown in direction “B”.

2. Push the stylus upward as in direction «C» until the stylus locks into the tip position.