Curtis SKCR2613B User Manual

MODEL NO. SKCR2613B

UNDERCOUNTER CD RADIO

OWNER'S MANUAL

PLEASE READ BEFORE OPERATING THIS EQUIPMENT

123

PREPARATION FOR USE

Power Sources

This portable audio system is designed to operate
on either 120V AC, 60Hz house current.

AC Operation

Unwind the AC cord and extend it to its full length.
Insert the small end of the AC cord into the AC socket on the rear of the unit. Insert
the other end of the AC cord into any convenient 120V AC, 60Hz household outlet.

Please note that this unit is equipped with a polarized AC plug which has one blade
wider than the other. This is a safety feature to reduce the likelihood of electric
shock. This polarized AC plug will only fit in a polarized AC outlet. If you find that
you cannot insert this plug into your outlet, you may have an obsolete non-polarized
outlet. Please do not try to defeat this safety feature by using a non-polarized
adapter or by filing the wider blade to make it fit into your outlet. If this plug does
not fit into your outlet, you should contact a qualified licensed electrician to replace
your obsolete outlet.

GETTING STARTED

POWER SUPPLY

This System operates on AC120V 60 Hz line power
supply and 3 x “AAA” batteries for the clock memory
backup.

1. Remove the battery compartment from side
of the unit.

2. Install 3 x “AAA” batteries with the correct
polarity. (Batteries not included)

3. Replace the battery compartment.

IMPORTANT: Be sure that the battery is installed correctly. Wrong polarity may
damage the unit.

4