Curtis SDVD8706 User Manual
SDVD8706
Table Of Contents
Safety Precaution 1
Package 3
Main Features 3
Main Unit Controls 4
System Connection 5
The Remote Control 11
Basic operation 13
System Setup 17
Specification 21
Troubleshooting 22
.
Safety Precaution
Warning: To reduce the risk of fire or electric shock, do not expose this
apparatus to rain or moisture.
1) Please read the instruction manual carefully and follow all the
requirements of safe operation to operate the device.
2) Do not use this unit near water. Do not place over the unit any container
with liquid inside.
3) Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.
4) Unplug this unit during lightning storms or when unused for long time.
5) About Cleaning: Unplug the system, use only wet cloth to clean. Do not
use liquid detergent or aerosol.
6) Only use accessories specified by the manufacturer.
7) Refer all servicing to qualified service personnel, servicing is required
when the unit has been damaged in any way, such as power supply cord
or plug is damaged, liquid has been spilled or objects have fallen into the
unit, exposed to moisture, does not operate normally. Don't try to repair
the machine by yourself because of the danger of high voltage and
electric shock.
8) Do not use irregular shaped discs such as heart or star-shaped discs as
they may cause the unit to malfunction.
1
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that
may cause undesired operation.
Warning: Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
Package
DVD Player
Remote Control with battery
AV Power Cable
AC/DC Power Adapter
Cigarette Lighter Adapter
User Manual
Moungting Straps
1
1
1
1
1
1
2
Main Features
High brightness color 7” LCD screen
Compatible with disc of DVD,MP3,CD,JPEG,etc
Built-in stereo speaker
Support PAL or NTSC system
Support Multi-language OSD,speed forward/backward,repeat function
Consult the dealer or an experienced radio/TV technician for help.
32
Main Unit Controls
System Connection
1 2
OK
MUTE
5
3
678
4
1. Open knob
2. Power ON/OFF switch
3. SETUP button
4. MUTE button
( )/ ( )/ ( )/ ( )
5.
6. OK button(Function same
as “ENTER”on remote control)
7. Play/Pause
8. STOP button
Monitor View
ON OFF
1
2
3
4
5
ON OFF
Powering and installation
Plug one end of the AC/DC power adaptor into the DC IN 9-12V jack on the right of the
unit, then plug the other end into the AC power receptacle. Please refer to the following
9
10
DC OUT
11
AV OUT
12
13
CLOSE
14 15
9. DC IN 9-12V
10. DC OUT
11. AV OUT
12. Earphone jack
13. Volume knob
14. Bracket
15. Rating label position
6
BRIGHTNESS
illustration.
DC OUT
AV OUT
If using car cigarette lighter adaptor to connect to the power:
Plug one end of the cigarette lighter adaptor into the DC IN 9-12V jack on the unit, plug
the other end into the car cigarette lighter socket.See illustration below.
DC OUT
AV OUT
1. Power ON/OFF
2. Volume knob
3. Earphone jack
4. AV IN
CLOSE
8
7
5. DC IN 9-12V
Note:
Car cigarette lighter adaptor is available to use only when the car cigarette lighter with
DC 12V negative grounding.
The mains plug is used as the disconnect device, the disconnect device should remain
readily operable.
6. Brightness knob
7. Bracket
8. Rating label position
4
5
Loading...