Curtis SDVD1041-DG User Manual

IInntteerrtt eekk
EP4005 529
CM
ENER GY
PERF ORMA NCE
VERI FIED
REND EMENT
VERI FIE
SDVD1041-DG
S.K.U.#: 3-362-0865
- This lightning flash with arrowhead symbol within an
22. Unplug the apparatus during lightning storms or when unused for long periods of time
23. Refer all servicing to qualified personnel. Servicing is required when the apparatus has been damaged in any way,such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
24. CAUTION: These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock, do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so.
25. This equipment is a Class II or double insulated electrical appliance. It has been designed in such a way that it does not require a safety connection to electrical earth.
26. WARNING: The battery (battery or batteries or battery pack) shall not be exposed to excessive heat such as sunshine, fire or the like.
27. WARNING: The mains plug is used as disconnect device, the disconnect device shall remain readily operable.
28. Invisible laser radiation when open and interlocks defeated. Avoid exposure to beam of
laser.
29. WARNING: Only use attachments/accessories
specified or provided by the manufacturer.
30. WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or
moisture. The apparatus shall not be exposed to
dripping or splashing and that objects filled with liquids, such as vases, shall not be placed on apparatus.
31. No naked flame sources, such as lighted candles,
should be placed on the apparatus.
32. Attention should be drawn to environmental aspects of battery disposal.
33. Use of the apparatus in moderate climates. Caution
equilateral triangle is intended to alert the user to the presence of non-insulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock.
- Warning: To reduce the risk of electric shock, do not remove cover (or back) as there are no user-serviceable parts inside. Refer servicing to qualified personnel.
- The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance instructions in the literature accompanying the appliance.
IMPORTANT SAFETY INSTRUCTIONS
3
5
6
7
8
9
10. Read these instructions – All the safety and operating instructions should be read before this product is operated.
11. Keep these instructions – The safety and operating instructions should be retained for future reference.
12. Heed all warnings – All warnings on the appliance and in the operating instructions should be adhered to.
13. Follow all instructions – All operating and use instructions should be followed.
14. Do not use this apparatus near water – The appliance should not be used near water or moisture – for example, in a wet basement or near a swimming pool, and the like.
15. Clean only with dry cloth.
16. Do not block any ventilation openings. Install in accordance with the manufacture’s instructions.
17. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
18. Do not defeat the safety purpose of the polarized or grounding plug. A polarized plug has two blades with one wider than the other. A grounding plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
19. Protect the power cord from being walked on or pinched
particularly at the plugs, convenience receptacles, and at the point where they exit from the apparatus.
20. Only use attachments/accessories specified by the
manufacturer.
21. se only with the cart, stand, tripod, bracket, or table
specified by the manufacturer, or sold with the apparatus. When a cart or rack is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
6 7 8
19
20
21
22
22
22
OSD
OSD
3
GOTO
r’s
L an gu a ge
V ide o
Au dio
R a tin g
Mis c
L an gu a ge
V ide o
Au dio
R a tin g
Mis c
L an gu a ge
V ide o
Au dio
R a tin g
Mis c
L an g
L an gL an g
L an gu a ge
V ide o
Au dio
R a tin g
Mis c
L an gu a ge
V ide o
Au dio
R a tin g
Mis c
L an gu a ge
V ide o
Au dio
R a tin g
Mis c
L an g
MPEG4 subtitle
Subtitle
Audio
OSD Language English
French
Spanish
Portuguese
Auto Fit
NTSC
Component
L an gL an g
RAN
- Do not mix old and new batteries
- Do not mix alkaline, standard (carbon-zinc), or rechargeable (ni-cad, ni-mh, etc) batteries
The region code of the player is region 1.
L
R
VIDEOAUDIO
Y Pb/Cb Pr/Cr
COAXIAL
RAN
DVD1041
DVD1041
RAN
RAN
RAN
RAN
DVD1041
DVD1041
RAN
RAN
RAN
DVD1041
DVD1041
RAN
RAN
GOTO
GOTO
GOTO
GOTO
GOTO
GOTO
GOTO
DVD1041
RAN
DVD1041
RAN
001 002 003 004 005 006 007 008
JOJO01/001.mp3
Filter Repeat :Off Mode : Normal
Loading a DVD or VCD Disc:
1. Press the PROG button, the program menu will appear , use the left key to move the cursor to the left side ,then
and up
OSD
5, High light program view and press ENTER , the program tracks will appear ,then press PLAY on the remote control to activate the MP3 or CD program. 6, If you want to clear program, press Stop button twice to return player to stop mode, use LEFT button , then use UP/DOWN button to select the tracks you want to clear , then press ENTER , then move RIGHT cursor to high light " CLEAR PROGRAM", Press Enter button to clear program.
( NOTE
High Light the Browser view and press ENTER to return
back to Disc Menu )
DVD1041
RAN
RAN
OSD
OSD
firstOSD
OSD
third
fourth
fifth
sixth
OSD
OSD
OSD
OSD
La n gLa n gLa n gua g e
V ide o
Au dio
R a tin g
Mis c
La n gua g e
V ide o
Au dio
R a tin g
Mis c
La n gua g e
V ide o
Au dio
R a tin g
Mis c
La n g
La n gLa n g
La n gua g e
V ide o
Au dio
R a tin g
Mis c
La n gua g e
V ide o
Au dio
R a tin g
Mis c
La n gua g e
V ide o
Au dio
R a tin g
Mis c
La n g
La n gLa n gLa n gua g e
V ide o
Au dio
R a tin g
Mis c
La n gua g e
V ide o
Au dio
R a tin g
Mis c
La n gua g e
V ide o
Au dio
R a tin g
Mis c
La n g
Language English
French
Spanish
MPEG4 subtitle
Subtitle
Audio
MPEG4 subtitle
Audio
Subtitle
Portuguese
Press right direction button twice, Language sub-menu appears, press UP/DOWN to select your language, then press enter to confirm .
Component
La n gu ag e
V ide o
Au dio
R a tin g
Mis c
La n gu ag e
V ide o
Au dio
R a tin g
Mis c
La n gu ag e
V ide o
Au dio
R a tin g
Mis c
La n g
La n gL a ng
La n gu ag e
V ide o
Au dio
R a tin g
Mis c
La n gu ag e
V ide o
Au dio
R a tin g
Mis c
La n gu ag e
V ide o
Au dio
R a tin g
Mis c
La n g
La n gL an gL a ngu a ge
V ide o
Au dio
R a tin g
Mis c
La n gua g e
V ide o
Au dio
R a tin g
Mis c
La n gua g e
V ide o
Au dio
R a tin g
Mis c
La n g
La n gL a n gL a ng ua ge
V ide o
Au dio
R a tin g
Mis c
La n gua g e
V ide o
Au dio
R a tin g
Mis c
La n gua g e
V ide o
Au dio
R a tin g
Mis c
La n g
ENTER
ENTER
Component
Off
PCM
RAW
RIGHT
La n gL a ng
23
24
2.0CH output X1
X1
X1
W225xD235xH38mm
x
Loading...