Curtis RCD745MP3 User Manual
1
TO Prevent fire or shock hazard, do not use this plug w ith an extension cord, receptacle or add other
outlet unless the blades can be can be fully inserted to prevent blade exposure. To prevent fire or shock
hazard, do not expose this appliance to rain or moisture.
WARNINGS
WARNING
RCD745MP3
INSTRUCTION MANUAL
The lightnin g flash with arr owhead sym bol,within an equilateral triangle is intented to
alert the user to the presence
of un insulated' dangerous vo-
ltage' within the product's enclosure that m ay be of sufficient magnitude to constitute a
risk of electric shock to persons.
CAUTION : TO REDUCE THE
RISK OF ELECTRIC SHOC K
DO NOT REMOVE COVER (
OR BACK),NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QU ALIFIED SERVICE PER SO NNEL
The exclamation point within
an e q uilate ra l tria n g le is in tended to alert the user to the
presence of important operating a n d ma in te nan c e (s e r vi c ing) inst r uct i ons i n t he lit erature accomp any-ing th e applicance
IM PO RTA N T S AFET Y IN STRUC T ION S
1 Read these instruction .
2 ke ep the se instruction s.
3 he ed a ll warn ings .
4 Follow all instructions.
5 Do not use this product near water(swimming pool, beach, lake etc.).
6 Clean only with a dry cloth.
7 Do not block any of the ventilation openings.Install in accordance with the manufacturer's instructions .
8 D o not install near any heat sources such as radiators, heat registers . Stoves or other apparatus
(including amplifiers)that produce heat.
9 Do not defeat the safety purpose of the polarized or grounding-type plug, A polarized plug has two
blades with one wider than the other. A grounding type plug has two blades and a third grounding
prong. The wide blade or the third prong is provided for your safety. If the provided plug does not
fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10 Protect the powe r cord from being walked on or pinched particularly at receptacles and the point
where t h ey e xit from th e ste reo.
11 Only u se attachm ents/accessories specified by the manufacturer.
12 Unplug this apparatus during lightning storm s or when unused for long periods of time
13 Refer all servicing to qualified service personnel. Servicing is required when the system has been
da m a g ed in any way, su ch a s a damaged po w e r-supply cord or plug . Ha s be e n e xpo sed to rain or
moisture ,does not operate normally , or has been dropped.
14 This appliance should not be exposed to dripping water or splashing water and objects filled with
w ater, such as vases, should not be placed on this unit
- 1 -
RCD745MP3
2
Micro Hifi System with Compact Disc/MP3 Player, Digital PLL AM/FM-stereo
radio and Remote Control.
INSTRUCTION MANUAL
Please read this instruction manual carefully and familiarize yourself with your new HiFi
System before using it for the first time. Please retain this manual for future reference.
T ABLE OF CONTENTS
• Location and Controls ..............................................................................
• Remote Control ..........................................................................................
• Connecting to Power ................................................................................
• Power Supply .............................................................................................
• Headphones ...............................................................................................
• Tuner Operation .........................................................................................
• Compact Disc/MP3 Operation .................................................................
• Clock Function ...........................................................................................
• Special Functions ......................................................................................
• Important ................................................................................................................
• Specifications ........................................................................................................
3
4
5
5
6
6
8
11
13
13
14
LOCATION OF CONTROLS
1 STANDBY/ON Button
2 HEADPHONE JACK
3 VOLUME (+/-) Button
4 STOP Button
5 TUNING UP/CD SKIP Button
6 MUTE Button
7 TUNING DOWN/CD SKIP Button
8 PLAY/PAUSE & CD/MP3 Button
9 REMOTE Sensor
10 LCD Display
11 P.EQ Button
12 RANDOM/M-DOWN Button
13 TIMER Button
14 TUNER/BAND Button
15 REPEAT/M-UP Button
16 MEMORY/PROGRAM Button
17 CD Compartment OPEN/CLOSE Button
18 CD Compartment flap
Rear Panel
19 FM ANTENNA
20 AM ANTENNA
21 SPEAKER terminals R / L
22 AC POWER Cord
- 2 - - 3 -
REMOTE CONTROL
CONNECTING TO POWER
1 STANDBY/ON Button
2 CD /MP3 Button
3 TUN/BAND Button
4 P.EQ Button
5 MEM/PROG Button
6 SLEEP Button
7 RANDOM/MEM-DN Button
8 MUTE Button
9 TRACK/TUNING Button
10 TRACK/TUNING Button
11 - VOLUME Button
12 + VOLUME Button
13 PLAY/PAUSE Button
14 STOP Button
15 REPEAT/MUM-UP Button
16 TIMER Button
17 CLOCK Button
PREPARATION BEFORE USE (Batt. not included)
1. Remove the battery cover from the back of the remote control unit.
2. Insert two "AAA" size batteries. Insert the batteries with the
+ and - terminals matching the indication inside the battery
compartment.
3. Replace the cover.
BATTER Y REPLACEMENT
When the remote control operation becomes unstable
or the distance from which remote control is possible
becomes shorter, replace the batteries with new ones.
USING THE REMOTE CONTROL UNIT
• T o use remote control unit, point it at the remote sensor and press the button gently and
frimly. Remote control is possible within about 5m (approx. 16FT). However, since the
remote control range is less when the unit is used at an angle, use directly in front of the
remote sensor, as far as possible.
• Do not expose the remote sensor to strong light (direct sunlight or artificial lighting) and
make sure that there are no obstacles between the remote sensor and the remote
control unit.
• The remote control also incorporates a stand-by facility. Please note, this does not turn
the unit off.
CAUTION
Do not plug the power cord into an AC wall outlet until all connections have been made.
Be sure to make the correct connections, paying attention to the left and right speakers.
Plug in the cables securely; loose connections will result in unsatisfactory sound
reproduction or cause noise problems.
1. Speaker Jacks - Connect the left and right speakers to these ternimals.
2. AC Cord - Plug into a conveniently located 120V AC, 60Hz outlet.
SPEAKER CONNECTION
1. Place the speakers in convenient locations on either side of the unit. Usually a distance
of five to eight feet between speakers provides the best stereo effect, but this may vary
depending on the size and acoustics of the room.
2. Locate the Speaker Terminals on the rear of the unit and connect the left speaker to
the jack marked L and the right speaker to the jack marked R.
CAUTION
Only connect the speakers which are supplied with the unit. The use of any other or
additional speakers may cause damage to the unit. Never operate the unit without the
speakers connected.
SAFETY PRECAUTION
Do not allow this unit to be exposed to rain or moisture.
Mains Supply: 120V 60Hz - AC only
This symbol means that this unit is double insulated. An earth connection is not required.
POWER SUPPL Y
Remove the stereo carefully from the box, retaining the packaging for future use.
AC POWER OPERATION
Plug the power cord into an AC outlet having 120V, 60Hz only. Connecting this unit to other
power sources may damage the unit.
NOTES:
1.The AC plug supplied with the unit is polarized to
help minimize the possibility of electric shock. If the
polarized plug does not fit into a nonpolarized AC
outlet, do not file or cut the wide blade; it is the user's
resonsibility to have an electrican replace the obsolete outlet.
- 4 - - 5 -
Loading...