Curtis LCD2277 User Manual

LCD2277

READ CAREFULLY BEFORE OPERATION

CONTENTS

...................................................................................................................01

ACCESSORIES

...............................................................................................................02

CONTENTS

SAFETY INTRODUCTIONS

...........................................................................................03~07

INTRODUCTION

CONTROLS CONNECTION OPTION REMOTE CONTROL KEY FUNCTIONS INSTALLING BATTERIES

......................................................................................................................08

....................................................................................................09

..........................................................................10~11

..................................................................................................12

INSTALLATION

STAND INSTALLATION NOTES OF INSTALLATION

................................................................................................13~14

...............................................................................................15

CONNECTIONS & SETUP

ANTENNA CONNECTION EXTERNAL EQUIPMENT CONNECTIONS YPbPr CONNECTION S-VIDEO CONNECTION HDMI CONNECTION PC CONNECTION EARPHONE CONNECTION

............................................................................................16~17

.......................................................................................................19

....................................................................................................20

........................................................................................................20

............................................................................................................21

....................................................................................................21

BASIC OPERATION

TURNING THE TV ON VOLUME ADJUSTMENT PROGRAM SELECTION SLEEP TIMER RETURN FUNCTION SOURCE INPUT SWITCH

.......................................................................................................22

....................................................................................................22

..................................................................................................................23

....................................................................................................22

........................................................................................................23

.................................................................................................23

OSD OPERATION

HOW TO USE THE OSD VIDEO menu options AUDIO menu options Function menu options TV menu options PC menu options Advance menu options

...................................................................................................24

...............

...........................................................................................24~25

........................................................................................................26

.................................................................................................27~28

.............................................................................................................29

.............................................................................................................30

......................................................................................................31

...........................................................................18

APPENDIX

TROUBLESHOOTING PRODUCT SPECIFICATION

.................................................................................................32~34

.........................................................................................35~36

ACCESSORIES

SAFTEY INTRODUCTIONS

Ensure that the following accessories are included with your TV. If an accessory is missing, please contact the dealer where you purchased the product.

Batteries(AAA)

LCD2277

READ CAREFULLY BEFORE OPERATION

User Manual

AC Adapcter

AV cable

Power cord

MTS

S-Video YPbPr VGA HDMI

This LCD TV is engineered and manufactured to comply with the international safety standards. The same as other electrical equipments,all the safety and operating instructions should be read before the appliance is operated.

About Symbols

This manual includes different kinds of symbols. To ensure the correct using, as well as to avoid danger to users and others, the following introductions should be adhered to.

This is a WARNING symbol. If the users ignore this warning, there might be personal damage or even death due to incorrect operation.

This is an ATTENTION symbol. If the users ignore this warning, there might be damage to the person or to the appliance due to incorrect operation.

SOURCE

No Operations when Problems Occur

When abnormal phenomenon happens, such as smoking, smell, no picture, no voice, over loud voice, damage of part or cable, and inside of liquid or other things, there might be fire or electrical shock. Under such occasions, please unplug the TV set, make sure there is no smoke or smell, and

get

contact with the dealer. DO NOT repair it by yourself, or there might be hurt

to human body.

No Entry of Liquid or Object

There might be fire or electrical shock if liquid or other object get inside the appliance. Please pay more attention to your children. If it happens, please unplug the TV set, make with the dealer.

sure there is no smoke or smell, and get contact

Remote control

■ Keep the TV away from rain and moisture.

■ Do not set liquids, including flower vases and vessels filled with chemicals or water etc. On top of the TV or around it.

■ Do not set metal or tinder on top of the TV or around

it.

SAFETY INTRODUCTIONS

Don’t Remove or Rejigger the TV Set

There is high voltage subassembly inside the TV set, which may cause fire or electrical shock during repair.

■ DO NOT remove cover ( or back ).

NO Quiver or Concussion on TV Set

This appliance should not be exposed to dripping or broken. Continuous use might cause fire or electrical shock. If the panel gets broken, please unplug

set, and get contact with the dealer.

the TV

Set the TV on Balanced Spot

There will be damage if the TV drops or breaks.

■ Don’t set the TV on uneven, oblique, or shacking surface.

Ventilation

Don’t interfere with its proper ventilation when the TV is working or has just been unplugged, or the display may be spoiled or life to keep proper ventilation, please allow a clearance of 10 inches on each side from the wall.

■ Don’t set any object around the ventilation openings of the appliance.

■ Don’t block the ventilation openings.

■ No inversion of the screen.

■ Don’t cover the appliance with table cloth.

■

Don’t set the appliance on carpet, bedding, or near to curtain.

shortened due to over heating. In order

Power Sources

Unbefitting power sources may cause fire or electrical shock. The appliance should be connected to a power supply of the type described in the operating instructions or as marked on the appliance.

■ Power supply cord should adapt to the socket outlet.

Power Cord Connection

Incorrect connection of power cord may cause fire or electrical shock.

■ Don’t touch the cord with wet hands.

■ Please check the pontes if it is clean ( no dust ) before use. If it is not, please do the cleaning with dry and soft fabric.

■ Fix the power cord steadily in to the socket outlet to avoid it becoming flexible, or it may have malfunction.

■ Don’t cut off the cord, for it may debase the performance. If you want to lengthen it, please make an appropriate one or get contact with the dealer.

■ If you want to change the fuse in the connector plugs, please same resistance and model.

change it with the

Connect to Earthing Connection

This appliance shall be connected to a mains socket outlet with a protective earthing connection. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. Take care of the cord, or there might be fire or electrical shock due to broken cord. pressed, or tensed. If the cord has problem (the core string emerges or the cord breaks), please get contact with the dealer.

■ Never allow heavy objects such as the TV set itself to be placed on the power cord. Never cover the cord with table cloth, for it may lead you to set heavy object on the cord duo to ignorance.

■ When removing the power plug from the onto the plug, never pull by the cord.

■ Don’t set the cord next to heaters.

■ Don’t touch the plug right after it is unplugged to avoid electrical shock.

■ Don’t touch the plug during lightning.

■ Don’t allow cord to become knotted or tangled.

■ Protect receptacles, and the point where they exit from the apparatus.

the power cord from being walked on or pinched particularly at plugs, convenience

Please make sure that the cord is not over hot,

socket, always hold

Dispose the Batteries Carefully

■ Incorrect disposal of batteries may cause fire or human damage, and even explosion.

■ Don’t throw batteries into fire or water.

■ Keep the batteries far away from fire or heat.

■ Don’t fetch the batteries with metal forceps.

■ Keep the batteries under cool and dry environment.

■ Match

■ Don’t charge up, dismantle, or joint the batteries.

■ Don’t impact the batteries.

■ Please use the batteries that are appointed in the user’s manual.

■ Please clean the matter sweeps out of the batteries if they break, and change

new pair. If the matters stick to your clothes, please clean it with water downright.

■ Please treat the used batteries with the observance of the local law.

the batteries to the (+) and (-) marks in the battery compartment.

Keep the TV Set away from Moisture and Dust

TIf you set the appliance under moisture or dust environment, it might cause fire or electrical shock due to lampblack

■ Don’t set the TV in kitchen, places nearby heaters, or places of lampblack and moisture. For heat from high temperature may affect the display or other components, and cause distortion, meltage, and fire.

■ Don’t set the TV, remote control, or other components under sun

■ Don’t set the TV where the difference in temperature is great.

or erosive gas.

or near heaters.

Power Cords

Remove the power plug from the socket on occasions when you will not be using the set for an extended period.

■ Before cleaning, please turn off the TV and unplug the power cord. Or there might be fire or electrical shock.

SAFETY INTRODUCTIONS

Don’t Set the TV in the places below:

■ Under sun or near heaters.

■ Places where difference in temperature goes great.

■ Places that have bad ventilation.

■ Near fire.

■ Moist places such as bathroom.

■ Places that human walks frequently or places where are quivering fiercely.

■ Places where is deflective or unbalanced.

Watching TV

Please watch TV indoors where there is proper brightness. Please make sure the sunlight will not fall directly on the picture screen. Please relax your eyes every now and then by taking an overlook.

How to Clean the Picture Screen

Before cleaning, please turn off the TV and unplug the power cord. Don’t beat or scrape the

screen with sharp and hard object. Clean the screen with a soft cloth moistened in warm water. A mild soap may be used if the screen is extremely dirty. Dry the screen with a soft cloth after cleaning.

How to Clean the TV Set

Clean the TV and control panel with a soft cloth. A mild soap screen is extremely dirty. Dry them with a soft cloth after cleaning. Choose the right cleanser, or it may fade the TV set, or make it scratched or cracked.

may be used if the

To Avoid Wireless Receiver

This TV set is designed to comply with the EMI standard to avoid problems of wireless receiver.

■ Set the TV far away from wireless receiver.

■ Adjust the wireless’s antenna to avoid interference on TV;

■ Make sure the TV set is out of interference with the wireless;

■ The antenna

■ Turn off all the equipments, except the TV set to check if the TV interferes

the wireless receiver;

■ If the problem occurs, please check all the notes above.

should use coaxial line.

Notes of Cable Connection

■ Make sure that all cables, including connector plugs, extend lines, and connecting cables between equipments are specify by the manufacturer. Before changing the connection, please turn off the power and unplug the power cord;

■ The power cord should not be the same one as other equipments’;

■ Use plugs with a protective earthing connection.

Notes of Transportation

Please handle with care during transportation. Besides, please use the original carton and wrap page, or it may damage the TV set. Please retain the original carton and wrap page.

Don’t Impact the Remote Control

Impacts on

■ Please don’t chuck the remote control;

■ Don’t set heavy object on remote control.

remote control may lead to trouble.

To Avoid Fierce Lights

The sensor of remote control will not work if the lights, such as sunlight or bright indoor illumination fall directly on may cause distortion of the picture or unusual sound. There should no equipment like mobile telephone or wireless receiver.

it. Make sure that there is no interference from wireless, or it

Adjust Volume to a Proper Level

It’s better to turn down the volume and shut the windows at night, in case it will influence others.

Notes on Installation

■ Never use wooden screws and bracket to fix up. Use those that are specified by

the manufacturer;

■ Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when

moving the cart/apparatus combination to avoid injury from tip-over;

■ Pleas follow all the operating instructions of the

■ Use only the attachments/accessories specified by the manufacturer;

■ If you have any questions on installation, operation, or safety, please call the dealer.

wall or ceiling mounting;

Other Notes

■ Please don’t plug in on occasions of carelessness if there is no introduction of available automation or standby mode. Use the switch on the TV set and inform the family member

the method of the operation. Please take care of the handicapped and children;

■ Please dispose the appliance with the observance of the local law.

■ Do be ware of all electrical equipments.

INTRODUCTION

CONTROLS

This manual explains the features available on the model of 22 inch LCD TV.

■ This is a simplified representation of a front panel. Here shown may be somewhat different from your TV.

Front Panel Controls

(1): (VOL-) Press Volume- to decrease the volume. (2): (VOL+) Press Volume+ to increase the volume. (3): (CH-) Press the button to down the channel. (4): (CH+) Press the button to up the channel. (5): (SOURCE) Press this button to select AV source or TV source. (6): (MENU) Press this button to When the OSD menu is on, press this button to exit the menu. (7): (Power) Press this button to standby mode. (8): Indicator. (9): Remote control sensor window.

VOL+VOL-

display the OSD menu.

CH+CH-

SOURCE

POWER

CONNECTION OPTION

This is the back panel LCD TV

■ This is a simplified representation of a back panel. Here shown may be somewhat different from your TV.

Back Connection Panel

(01) (POWER) DC IN : Connect the power cord with (02) HDMI Input: Connect HDMI signal. (03) PC VGA Input: Connect PC VGA signal output. (04) YPBPR Video Input: Connect the component image output of your AV devices here. Then Connect audio output of your AV devices to R and L. (05) S-VIDEO Input: Connect S-video (06) AV Video Input: Connect composite video output of your AV device and Connect the audio output of your AV devices to R and L. (07) PC AUDIO Input: Connect PC audio input. (08) EARPHONE Output: Connect to headphone output. (09) RF: Antenna

Note: Please study the operation manuals of external equipments before connecting them to the television Please turn off the TV when connecting other equipments till all the connection is in correct.

Input (75 ohm).

56 8

AV L R

DC12V to this input.

output of your AV device.

EARPHONE

INTRODUCTION

REMOTE CONTROL KEY FUNCTIONS

(1) POWER button: Switches the set on from power on or off to power. (2) AUTO button: Press to pc source picture auto adjust. (3) MUTE button: Press to eliminate or restore the TV sound. (4) P.MODE button: (5) S.MODE button: (6) ASPECT button: Press to select picture mode 4:3, 16:9etc.

DISPLAY button: Press to display current status,

(7)

TV channel,

(8) Numerical buttons: Press number buttons for direct access TV channels. (9) button: (10) -/-- button: Direct input numerical button for 2 digit or 3digit program. (11) MENU button: LCD menu selection. (12) EXIT button: Exit the OSD menu (On-screen display). (13) SOURCE button: Press to display all possible input sources (14) SLEEP button: Sets the sleep (15) " "button: When OSD menu is on, press this button to move the selection focus up or change settings. (16) " "button: When OSD menu is on, press this button to move the selection focus down or (17) " "button: When OSD menu is on, press this button to move the selection focus left or confirm the settings. (18) " "button: When OSD menu is on, press this button to move the selection focus (19) " ENTER "button: Press the button to confirm the operation.

Press to select preset picture mode.

Press to select Sound mode button.

input source.

Press to return to previous channel.

timer。

change settings.

right or confirm the settings.

SOURCE

MTS

S-Video YPbPr VGA HDMI

REMOTE CONTROL KEY FUNCTIONS

(20) CH- button: Changes the channels down. (21) CH+ button: Changes the channels up. (22) VOL- button: Adjusts the volume down. (23) VOL+ button: Adjusts the volume up. (24) MTS button: Press to select the audio channels. (25) CC button: Press to display the closed caption. (26) TV button: (27) AV button: Press the button to select the AV input. (28) S-Video button: Press the button to select the S-Video input. (29) YPbPr button: Press the button to select the YPbPr input. (30) VGA button: Press the button to select the VGA (31) HDMI button: Press the button to select the HDMI input.

Press the button to select the TV input.

input.

20 21

24 25

28 29

SOURCE

MTS

S-Video YPbPr VGA HDMI

22 27

26 31

INTRODUCTION

INSTALLATION

INSTALLING BATTERIES

(1)Open the battery compartment cover on the back side (2)Insert two 1.5V batteries of AAA type with correct polarity (3)Close the battery compartment cover on the back side

Notes on Using Batteries The use of the wrong type of batteries may cause chemical leaks and/or explosion. Please note the following: Always ensure that the batteries are inserted with the positive and negative terminals in the correct direction as shown in the batteries compartment. Different types of batteries have different characteristics. different types. Do not mix old and new batteries. Mixing old and new batteries will shorten battery life and /or cause chemical leaks from the old batteries. When batteries fail to function, replace them immediately. Chemicals which leak from batteries may cause skin irritation. If any chemical matter wipe it up immediately using a dry cloth. Due to varying storage conditions, the battery life for the batteries included with your unit may be shortened. If the remote control is not used for a long period of time, remove the batteries.

Notes on using the Remote control. Do not strike or drop the remote. Do not expose the remote control to liquids and do not place it in humid environment. Do not install or place the remote control in direct sunlight. The heat may damage the remote control.

seeps out of the batteries,

Do not mix

STANDARD INSTALLATION

■The TV can be installed in various ways such as on a wall, or on a desktop etc.

4inches

■The TV is designed to be mounted horizontally. Ensure that you connect the earth ground wire to prevent possible electric shock. If grounding methods are not possible, have a qualified electrician install a separate circuit breaker.

Short-Circuit

Breaker

Do not try to ground the unit by connecting it to telephone wires, lightening rods or gas pipes.

4inches

Power Supply

a. Desktop Pedestal Installation

This is the default installation way of the TV.

INSTALLATION

STANDARD INSTALLATION

b. Wall Mount: Horizontal installation

(1) Secure the wall brackets with the bolts (not provided as parts of the product, must purchase separately) on the wall. Match the height of the bracket that is mounted on the wall. The wall bracket is of nomal dimension. Please see the position of the brackets bolts as follow picture .The actual dimension of the wall brackts bolt should according to the products.

The wall brackets bolt position

(2) Remove the table stand of the TV when install the TV on a wall as follow:

wall

NOTES OF INSTALLATION

(1) Keep the TV stand when installing. (2)Don’t set the TV set on shelves, carpets, beds, or closets. (3)Don’t cover the TV with curtain or paper. (4) Avoid the following methods:

Interfere ventilation Interfere ventilation

(3)For proper ventilation, allow a clearance of 4" on each

4inches

side from the wall.

4inches

■

To prevent the equipment damage, never plug in any power cords until

you have finished connecting all equipment.

ANTENNA CONNECTION

■For optimum picture quality, adjust antenna direction.

■An antenna cable and converter are not supplied.

CONNECTIONS & SETUPCONNECTIONS & SETUP

ANTENNA CONNECTION

■In poor signal areas, to get better picture quality, install a signal amplifier to the antenna as shown below.

■If signal needs to be split for two TVs, use an antenna signal splitter for connection.

CONNECTIONS & SETUP CONNECTIONS & SETUP

PHILI PS

DRIVE

TURBO

EXTERNAL EQUIPMENT CONNECTIONS

1. Connect the AV jacks between TV and external equipment. Match the jack colors (Video = yellow, Audio Left = white, and Audio Right = red).

2. Select AV source with using the SOURCE/ button on the remote control.

3. Operate the corresponding external equipment. Refer to operating guide.

Camcorder

PHILIPS

Video Game Set

TURBO DRIVE

external equipment

YPbPr CONNECTION

When connecting with a component cable

1. Connect the video outputs (Y, PB, PR) of the DVD to the YpbPr jacks on the set

2. Connect the audio outputs of the DVD to the Audio Input (L/R) jacks on the set.

3. Turn on the DVD player, insert a DVD.

4. Select YPbPr source

5. Refer to the DVD player's manual for operating instructions.

with using the SOURCE/ button on the remote control.

DVD

Y=GREEN, Pb=BLUE, Pr=RED

CONNECTIONS & SETUP CONNECTIONS & SETUP

S-VIDEO CONNECTION

When connecting with a S-VIDEO cable

1. Connect the S-VIDEO output of the DVD to the S-VIDEO input on the set.

2. Connect the audio outputs of the DVD to the Audio Input (L/R) jacks on the set.

3. Turn on the DVD player, insert a DVD

4. Select S-VIDEO source with using the SOURCE/

5. Refer to the DVD player's manual for operating instructions

button on the remote control.

DVD

HDMI CONNECTION

When connecting with a HDMI cable

1. Connect the HDMI output of the DVD to the HDMI Input jack on the set.

2. Select HDMI source with using the SOURCE/ button on the remote control

3. Refer

to the DVD player's manual for

operating instructions.

PC CONNECTION

When connecting with a D-sub 15 pin cable

1. Connect the RGB output of the PC to the PC VGA Input jack on the set.

2. Connect the audio outputs of the PC to the PC Audio Input jack on the set.

3. Turn on the PC and the set.

4. Select PC source with using the SOURCE

5. Refer to the PC manual for operating instructions.

/ button on the remote control.

EARPHONE CONNECTION

EARPHONE

2. Turn on the TV, the earphone is sound, but the sepeaker no sound output.

EARPHONE

+ 28 hidden pages

Curtis LCD2277 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual