Curtis LCD1988 User Manual

TABLE OF CO NTENTS

SAFETY PRECAUTONS--------------------------------------------------- ----------------1

IMPORTANT SAFETY INSTRUCTIONS-----------------------------------------------1

OSD MANUAL -------------------------------------------------------------- ------ ------ -----2

REMOTE CONTROLLER ---------------------------------------- --------------------------- 2

llustration of the keys on the remote control ------------------------------------------3

Menu picture------------------------------------------------------------------------------------4

Input mode PC---- -------------------------------------------------------------------------------4

Input mode AV / S-Video---------------------------------------------------------------------6

Input mode TV--------- ----------------- --- ------------------------------------------------------ 10

CONNECT PERIPHERAL EQUIPMENT --- ---------------- --- -- ------ --- ---- --- ---- -- -----13

Production Specifications -------------------------------------------------------------------14

Maint ai n i n g y our TV-----------------------------------------------------------------------------15

Troubleshooting----------------------------------------------------------------------------------16

IMPORTANT SAFEGUARDS SAFETY PRECAUTIONS

CAUTION

△

CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK,DO NOT REMOVE COVER(OR BACK)

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,DO NOT EXPOSE THIS APPARATUS

TO RAIN OR MOISTURE. NO USER SERVICEABLE PARTS INSIDE.REFER SERVICING TO QUALIFIED SERVICE PERSONNEL

The graphic symbols on the back cover of the set mean the following:

The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the Presence of uninsulated”dangerous Voltage “within the product”s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons

The exclamation point within an equilateral triangle is iintended to a lert the user to the presence of impor tant operating and maintenance (servicing) instructions in the literature accompanying the appliance.

RISK OF ELECTRIC SHOCK

DO NOT OPEN

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,DO NOT EXPOSE THIS APPLIANCE TO RAIN OR

MOISTURE

APPARATUS SHALL NOT BE EXPOSED TO DRIP PING OR SPLANSHING AND THAT NO OBJECTS FILLED WITH LIQUIDS

SUCH AS VASES,SHALL BE PLACED ON THE APPARATUS.

INSTALLATINO LOCATE the receiver in the room where direct light d oes not srike the screen.Total darkness or a reflection on the

picture screen can cause eyestrain.soft and indirect lighting is recommended for comfortable viewing. ALLOW enough space between the receiver and the vall to permit proper ventilation. AVOID excessive warm locations to prevent possible damage to the cabinet or com ponent failure. CONNECTION THIS TV power adapter can be connected to AC100v-240v,50/60HZ, the adapter is output DC12v/3A.

IMPORTANT SAFEGUARDS

DEGAUSSING

All colour television receivers are sensitive to magnetic influences,usually caused by either moving the r ece iver from one place to another or using certain electrical appliances near the receiver.this residual magnetism as it is called,so do not place it to near these device

OSD Manual

Control Panel:

Select Menu Powe

• SELECT - Select input signals: TV/PC-RGB/AV/S-VIDEO

MENU - Menu / Enter

•

－ - Volume down / Left orientation / TV channel down

+ - Volume up / Right orientation / TV channel up

•

• POWER - Power switch

Remote contro l

These buttons control your TV’s basic features including on - scr een menus . To use t h e advanc e d f u ncti on, you must us e the rem o t e contr Control Panel Functions:

Illustration of the keys on the remote control:

1. POWER Power supply switch

2. INPU T Selec t TV / PC / AV / S-VIDEO

3. Esc Exit

4. MENU MENU / ENTER

5. VOL

6. VOL

7. PRO S TV channel up

8. PRO T TV channel down

9. AUT O Auto Ad jus t (PC MODE )

10. 0-9

11. -/-- One b i t or t w o b it TV cha n nel select 12 RECALL Sets the system to factory default value 13 MUTE Turn on/off the sound

14. DISPLAY Display current source

Volume down / Left orientation Volu me up / Right orientation

TV channel number select or teletext page number selec t

Menu picture

Input mode PC

1- Press “Select” button to enter to display the PC and press”menu “to display

pc menu

2- Press “+”/ “-” to scroll through the parameters

3- Press “Menu” to enter ,then press “+”/“-”_to make changes the value of

the parameters.

4- Press the “Select” button to exit the menu

PC MAIN MENU

Name of submen u Picture of submen u Instructions

CONTRAST

Adjust the contrast of picture

BRIGHTNESS

IMAGE SETTING

Adjust the brightness of picture

AUTO CONFIG:auto adjust the picture to set best PHASE: adjust the ADC CLOCK: adjust the clock of picture H-POSITION:adjust the position of picture to left or right V-POSITION:adjust the position of picture to up or down

COLOR SETTING

NATIVE: select the color temp to native 9300k:select the color temp to cool 6500k:select the color temp to warm USER: user define

LANGUAGE:you may select one language from English or france OSD .H: adjust the position of osd menu to left or right OSD .V: adjust the position of osd menu to up or down

OSD SETTING

SOUND SETTING

TREBLE:adjust the treble sound BASS: adjust the bass

BALANCE: Adjust the balance of the audio output from left to right.

MUTE: turn off/on sound VOLUME: adjust the value of sound

RESET

Return the value of default

+ 14 hidden pages