MODEL NO. KCR2611UK
UNDERCOUNTER LCD TV CLOCK RADIO
OWNER'S MANUAL
PLEASE READ BEFORE OPERATING THIS EQUIPMENT
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:
SHOCK,
USER-SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
TO REDUCE THE RISK OF ELECTRIC
DO NOT REMOVE COVER (OR BACK). NO
DANGEROUS VOLTAGE
The lightning flash with arrowhead symbol,
within an equilateral triangle is intended to alert
the user to the presence of uninsulated
dangerous voltage within the product’s
enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
ATTENTION
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
1
SAFETY INSTRUCTIONS
Before using the unit, be sure to read all
operating instructions carefully. Please note that
these are general precautions and may not
pertain to your unit. For example, this unit may
not have the capability to be connected to an
outdoor antenna.
1. READ INSTRUCTIONS
All the safety and operating instructions should
be read before the product is operated.
2. RETAIN INSTRUCTIONS
The safety and operating instructions should be
retained for future reference.
3. HEED WARNINGS
All warnings on the product and in the operating
instructions should be adhered to.
4. FOLLOW INSTRUCTIONS
All operating and use instructions should be
followed.
5. CLEANING
Unplug this product from the wall outlet before
cleaning. Do not use liquid cleaners or aerosol
cleaners. Use a damp cloth for cleaning.
6. ATTACHMENTS
Do not use attachments not recommended by
the product's manufacturer as they may cause
hazards.
7. WATER AND MOISTURE
Do not use this product near water- for example,
near a bathtub, washbowl, kitchen sink, or
laundry tub, in a wet basement, or near a
swimming pool.
8. ACCESSORIES
Do not place this product on an unstable cart,
stand, tripod, bracket, or table.
The product may fall, causing
serious injury and serious
damage to the product. Use
only with a cart, stand, tripod,
bracket, or table recommended
by the manufacturer or sold with
the product. Any mounting of the product should
follow the manufacturer’s instructions, and
should use a mounting accessory recommended
by the manufacturer.
8A.
An appliance and cart combination should be
moved with care. Quick stops, excessive force,
and uneven surfaces may cause the appliance
and cart combination to overturn.
9. VENTILATION
Slots and openings in the cabinet and in the back
or bottom are provided for ventilation and to
ensure reliable operation of the product and to
protect it from overheating. These openings must
not be blocked or covered. The openings should
never be blocked by placing the product on a
bed, sofa, rug, or other similar surface. This
product should never be placed near or over a
radia-tor or heat source. This product should not
be placed in a built-in installation such as a
bookcase or rack unless proper ventilation is
provided or the manufacturer's instructions have
been adhered to.
10. POWER SOURCES
This product should be operated only from the
type of power source indicated on the marking
label. If you are not sure of the type of power
supply to your home, consult your appliance
dealer or local power company.
11. POWER-CORD PROTECTION
Power-supply cords should be routed so that
they are not likely to be walked on or pinched by
items placed upon or against them, paying
particular attention to cords at plugs,
convenience receptacles, and the point where
they exit from the appliance.
12. LIGHTNING
To protect your product from a lightning storm, or
when it is left unattended and unused for long
periods of time, unplug it from the wall outlet and
disconnect the antenna or cable system. This will
prevent damage to the product due to lightning
and power-line surges.
13. POWER LINES
An outside antenna system should not be
located in the vicinity of overhead power lines or
other electric light or power circuits, or where it
can fall into such power lines or circuits. When
installing an outside antenna system, extreme
care should be taken to keep from touching such
power lines or circuits as contact with them might
be fatal.
14. OVERLOADING
Do not overload wall outlets and extension cords
as this can result in a risk of fire or electric
shock.
15. OBJECT AND LIQUID ENTRY
Never push objects of any kind into this product
through openings as they may touch dangerous
voltage points or short out parts that could result
in fire or electric shock. Never spill or spray any
type of liquid on the product.
16. SERVICING
Do not attempt to service this product yourself as
opening or removing covers may expose you to
dangerous voltage or other hazards. Refer all
servicing to qualified service personnel.
2
SAFETY INSTRUCTIONS
17. REPLACEMENT PARTS
When replacement parts are required, be sure
the service technician uses replacement parts
specified by the manufacturer or those that have
the same characteristics as the original part.
Unauthorized substitutions may result in fire,
electric shock or other hazards.
18. SAFETY CHECK
Upon completion of any service or repairs to this
product, ask the service technician to perform
safety checks to determine that the product is in
proper operating condition.
19. WALL OR CEILING MOUNTING
The product should be mounted to a wall or
ceiling only as recommended by the
manufacturer.
20. DAMAGE REQUIRING SERVICE
Unplug the product from the wall outlet and refer
servicing to qualified service personnel under the
following conditions:
a. When the power-supply cord or plug is
damaged.
b. If liquid has been spilled, or objects have fallen
into the product.
c. If the product has been exposed to rain or
water.
d. If the product does not operate normally by
following the operating instructions. Adjust only
those controls that are covered by the operating
instructions, as an adjustment of other controls
may result in damage and will often require
extensive work by a qualified technician to
restore the product to its normal operation.
e. If the product has been dropped or the
cabinethas been damaged.
f. When the product exhibits a distinct change
inperformance - this indicates a need for
service.
21. HEAT
The product should be situated away from heat
sources such as radiators, heat registers, stoves,
or other products (including amplifiers) that
produce heat.
3
POWER SOURCE
AC:
Use the AC polarized line cord included with
the unit for operation on AC power. Insert the
AC cord into any convenient 230V 50Hz
household outlet.
PREPARATION FOR USE
Unpacking and Setup
• Carefully remove the unit from the display carton and remove all packing
material from the unit itself.
4
16
12
LOCATION OF CONTROLS
4
14
5
7
8
13
6
10
9
11
15
2
1
1. TIMER BUTTON
2. MEM UP BUTTON
3. MEM DN BUTTON
4. TUNER/CLK BUTTON
5. MOUNTING BRACKET
6. FUNCTION BUTTON
7. CH. UP BUTTON
8. VOLUME BUTTON
9. MENU/ENTER BUTTON
10. ITEM BUTTON
11. CH. DN BUTTON
12. EQ BUTTON
13. BAND BUTTON
14. SLEEP BUTTON
15. MEM/CLK SET BUTTON
16. POWER BUTTON
3
5
LOCATION OF CONTROLS
1
2
3
4
5
6
7
1. MEM. CH. UP/DN BUTTON
2. FUNCTION BUTTON
15
14
13
12
11
10
8
9. MENU BUTTON
10. TFT ON/OFF BUTTON
9
3. NUMBERDIAL BUTTONS
4. DISPLAY BUTTON
5. ITEM/ENTER BUTTON
6. TIMER BUTTON
7. MEM/CLK SET BUTTON
8. TUNE/CH BUTTON
11. BAND BUTTON
12. EQ BUTTON
13. VOLUME BUTTON
14. MUTE BUTTON
15. POWER BUTTON
6
POWER SOURCES
(FOR REMOTE CONTROL)
BATTERIES
NOTE:
The button cell battery contains mercury, don’t put in the trash. Recycle or
dispose as hazardous waste.
NOTE:
You may need to remove a protective covering from the remote’s battery
compartment before using the remote control.
7
OPERATING INSTRUCTIONS
1. SETTING THE TIME (POWER OFF MODE)
MEM/CLK SET MEM/CLK SET
PRESS AND HOLD
TUNING
TUNING
TO SELECT 24 HR OR 12 HR
MEM/CLK SET
2. LISTENING TO THE RADIO
FUNCTION
SELECT RADIO
TUNING
TO ADJUST MINUTE
BAND
SELECT AM/FM
MEM/CLK SET
TUNING
PRESS AND HOLD TO SCAN TO
THE NEXT AVAILABLE CHANNEL
8
OPERATING INSTRUCTIONS
PROGRAM RADIO STATIONS
TUNING
TUNING
MEM/CLK SET
3. TELEVISION OPERATION
TUNING 45.00MHz
ENTER
CHANNEL
BAND
SOUND SYSTEM
FINE TUNE
AUTO SCAN
MEM/CLK SET
PRESS AND HOLD
ENTER
TUNING 45.00MHz
CHANNEL
BAND
SOUND SYSTEM
FINE TUNE
AUTO SCAN
TUNING 45.00MHz
CHANNEL
BAND
SOUND SYSTEM
FINE TUNE
AUTO SCAN
REPEATEDLY
9
4. SET UP
PICTURE
OPERATING INSTRUCTIONS
BRIGHTNESS
CONTRAST
ENTER
SHARPNESS
ENTER
COLOR
ENTER
PICTURE
BRIGHTNESS
CONTRAST
SHARPNESS
COLOR
HUE
DISPLAY MODE
DEFAULT
ENTER
ENTER
ENTER
FULL
PICTURE
BRIGHTNESS
CONTRAST
SHARPNESS
COLOR
HUE
DISPLAY MODE
DEFAULT
PICTURE
BRIGHTNESS
CONTRAST
SHARPNESS
COLOR
HUE
DISPLAY MODE
DEFAULT
PICTURE
BRIGHTNESS
CONTRAST
SHARPNESS
COLOR
HUE
DISPLAY MODE
DEFAULT
FULL
FULL
FULL
10
OPERATING INSTRUCTIONS
HUE
ENTER
DISPLAY MODE
ENTER
RESET TO DEFAULT SETTING
PICTURE
BRIGHTNESS
CONTRAST
SHARPNESS
COLOR
HUE
DISPLAY MODE
RESETING
PICTURE
BRIGHTNESS
ENTER
ENTER
5
ENTERENTER
6
CONTRAST
SHARPNESS
COLOR
HUE
DISPLAY MODE
DEFAULT
PICTURE
BRIGHTNESS
CONTRAST
SHARPNESS
COLOR
HUE
DISPLAY MODE
DEFAULT
PICTURE
BRIGHTNESS
CONTRAST
SHARPNESS
COLOR
HUE
DISPLAY MODE
DEFAULT
PICTURE
BRIGHTNESS
CONTRAST
SHARPNESS
COLOR
HUE
DISPLAY MODE
DEFAULT
CHOOSE 4:3
OR FULL
EXIT PICTURE MENU
ENTER
TUNING CHANNEL
ENTER
TUNING
CHANNEL
BAND
SOUND SYSTEM
FINE TUNE
AUTO SCAN
11
OPERATING INSTRUCTIONS
5. LISTENING TO AN AUXILIARY SOURCE
FROM VIDEO
OUTPUT
FROM RIGHT
AUDIO OUTPUT
TV, VCR, STEREO,
VIDEO GAME SYSTEM, ETC.
FROM LEFT
AUDIO OUTPUT
6. SETTING KITCHEN TIMER
7. EQ
HOLD TIMER BUTTON
TO SHUT OFF TIMER
REPEATEDLY
12
CARE AND MAINTENANCE
GENERAL
*
Use a soft, clean cloth moistened with plain, luke-warm wafer to clean the
exterior of the unit.
*
Never use solvents such as benzene or other strong chemical cleaners since
these could damage the unit’s finish.
*
It is important that no liquid reaches the inside of the unit.
13
TROUBLESHOOTING GUIDE
PROBLEM SOLUTION
No sound is heard.
No sound is heard.
Snowy picture; noisy
sound.
Dotted lines or stripes.
Double images or
“ghosts”.
POSSIBLE CAUSE
GENERAL
Power is not on.
VOLUME Control is set
to minimum.
Mute is on.
RADIO
Station has not been
tuned properly.
FM reception is weak.
Wrong function is
selected.
TV
Station has not been
tuned properly.
This may be caused by
local interference
(e.g. Cars, neon signs,
hair dryers, etc.)
This may be caused by
reflections from nearby
mountains or buildings.
Press the POWER button.
Adjust the VOLUME
Control.
Press Mute on remote.
Tune station properly.
Extend the FM cord.
Press the FUNCTION
button to the radio
position.
Align the antenna or
connect an external
antenna.
Adjust the antenna for
minimum interference or
connect an optional
external antenna.
A highly directional
antenna may improve the
picture.
Good picture; no sound.
Good picture; noisy
sound.
Good picture; no sound.
No picture
to minimum.
This may be caused by
reflections from nearby
mountains or buildings.
This may be caused by
reflections from nearby
mountains or buildings.
Power is not on. Set the FUNCTION Switch
Adjust the volume.VOLUME control is set
A highly directional
antenna may improve the
picture.
A highly directional
antenna may improve the
picture.
to the TV position.
14
Loading...