Curtis iPOD iP1002 User Manual

MODEL NO. iP1002

PORTABLE DOCKING STATION FOR iPOD

OWNER'S MANUAL

PLEASE READ BEFORE OPERATING THIS EQUIPMENT

TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.

This symbol, located on back or bottom of the unit, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufﬁcient magnitude to constitute a risk of electric shock to persons.

This symbol, located on back or bottom of the unit, is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

Any use of the controls or an adjustment to the procedures other than those

speciﬁed herein may result in hazardous radiation.

CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE

BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.

To reduce the risk of electric shock, do not remove cover (or back). There are no user-serviceable parts inside. Please refer any servicing to qualiﬁed service personnel.

WARNING: Changes or modiﬁcations to this unit not expressly approved by

the party responsible for compliance could void the user’s authority to operate

the equipment.

NOTE: This equipment has been tested and found to comply with the limits

for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Warnings and Precautions

Features

6 7

8 9 10

Features Deﬁned

1 iPod Docking Station Connect your iPod, iPod mini, or iPod nano.

2 VOLUME Press the up arrow to increase the volume, and the down arrow to decrease volume.

3 LCD Display View the Time, AM Indicator, iPod Indicator, and Radio Frequency through this Liquid

Crystal Display.

4 POWER Press the POWER button to turn the radio off or on.

5 RADIO/AUX Press the FUNCTION button to switch between radio and Aux-in control.

6 MEM/CLK SET Press the MEM/CLK SET button to program a radio station into the presets, or to

adjust the clock.

7 FM Antenna The FM Rod Antenna provides flexibility and range when adjusting the FM reception. An AM Antenna is built into the player.

8 IPOD Press the IPOD button to power on an iPod and enable control through the player.

9 BAND/STOP Press the BAND button to switch between AM or FM radio stations, or stop iPod playing.

10 Tuning/NEXT/PREV. Press the Tuning/NEXT/PREV. button to increase/decrease the radio frequency, or

to increase/decrease the clock time when adjusting the clock. When iPod playing, press this button to skip to previous/next track or press & hold the button to backwards/forwards through a song.

11 PLAY/PAUSE/M-UP Press the PLAY/PAUSE/M-UP button to play or pause an iPod, or to cycle up through the preset radio stations.

12 Line-Out Use the Line-Out jack to connect the player to external speakers.

13 Aux-In Use the Aux-in jack to connect an iPod shufﬂe or other audio device to the player.

14 Video Out Plug the yellow connector of an AV Cord in the Video Output to send a video signal from a

Video iPod to a source (TV) with a Video Input.

15 FM ST Toggle the FM ST switch between FM ST & FM MONO.

16 DBBS Press the DBBS button to switch BBS modes between On/Off.

17 AC Connector Plug in the detechable AC cord here.

18 Battery Compartment (8-C Batteries) The Battery Compartment allows the unit to run DC power.

19 AC Cord (120V / 60 Hz) The attached AC (Alternating Current) Cord provides power to the player.

+ 7 hidden pages