Curtis GPD359B User Manual

GPD359B

User Manual

A. Basic Operation............................................................................................................................3

1. Understanding of the Product Components ..........................................................................3

1.1 Front components........................................................................................................3

1.2 Back components ........................................................................................................3

1.3 Top components ..........................................................................................................4

1.4 Left-side components..................................................................................................4

1.5 Right-side components................................................................................................4

1.6 Bottom components ....................................................................................................5

2. Accessory Operations............................................................................................................5

2.1 Charging by Car Charger ............................................................................................5

2.2 Install the Cradle and Car Mount ................................................................................6

2.3 USB Cable usage ........................................................................................................6

2.4 GPS Initial Cold Start Up............................................................................................6

B. Functions Operation .....................................................................................................................7

1 Powering & Main Menu ........................................................................................................7

2 Main Interface........................................................................................................................7

2.1 Navigation...................................................................................................................7

2.2 Music...........................................................................................................................7

2.3 Photo ...........................................................................................................................8

2.4 Ebook ........................................................................................................................10

2.5 Video ......................................................................................................................... 11

2.6 System.......................................................................................................................13

Precaution and Notice

The PND is used only as a navigation aid. It is not for precise measurement of direction,

distance, location or topography. The user must follow all traffic signs and local regulations

along the roads.

GPS satellite signals cannot pass through solid materials (except glass). When you are in a

tunnel or building, GPS position is not available.

At least 4 GPS satellite signals are needed to determine the current location. Signal reception

can be affected by situations, such as bad weather or dense overhead obstacles (e.g. tall

buildings).

Other wireless devices in the vehicle might interfere with the reception of satellite signals and

cause the unstable signal reception.

If system haltes, please press the power button to restart the device.

When you get out of the car, please do not leave your PND on the dashboard or subject to

direct sunlight. The overheating of the battery may cause malfunctions or danger.

Please do not fix the device where the driver’s field of vision is blocked.

A. Basic Operation

1. Understanding of the Product Components

1.1 Front components

Touch Screen

1.2 Back components

Light-Sensor

Reset

Speaker

1.3 Top components

1.4 Left-side components

Charging Indication

Power

MIC

1.5 Right-side components

T-flash Card Slot

Insert with a menory card; please do not remove the memory card when using the device

Mini-USB Port

1.6 Bottom components

Installing the T-flash Memory Card

The T-flash memory card contains the map data which PND needs. Please insert the memory

card into the slot on the right side of the PND.

Once the card is inserted, it can not be removed during the process of the device operation.

If you need to remove the card, please switch off the unit first. And then push the card in and

it will eject from the slot.

2. Accessory Operations

2.1 Charging by Car Charger

When use your PND in the car, it is better to use the car charger to power the unit, especially

on long journey.

Please plug the car charger into the device’s USB port on its right-side panel.

Please plug the another side of the car charger to cigarette lighter to charge the device.

It is better to fix the power cable so that it will not cause some unnecessary troubles.

2.2 Install the Cradle and Car Mount

Install car Mount System

Use the two screws to adjust the angle and direction of the PND

Step2: Install the holder into the Car cradle by the sockets

Step1: Rotate screw to lock onto car glass

Install PND into the holder

2.3 USB Cable usage

The USB cable is provided for system upgrading. It can connect the navigator to the computer

and make these two synchronize.

For upgrading and more information about Micros

oft Active Sync, please visit Microsoft web.

2.4 GPS Initial Cold Start Up

The first starting up should be in an open area without obstructions.

Hold until the device receives 4 GPS satellite signals, then you can program your trip.

Note:

There are various ways for searching a location on the map or planning your routing. Please

follow Navigation User Manual which will guide you when driving.

B. Functions Operation

1 Powering & Main Menu

Long time press the “Power” button to power the equipment on and you will see the power-on

interface. Long time press the “Power” button again to turn the unit off.

2 Main Interface

2.1 Navigation

Tap the “Navigation” icon to enter into the navigation interface.

2.2 Music

1. Tap “Music” icon on the main menu interface to enter into the music interface as follows:

2. Tap the song name you want to choose to enter into the following interface:

Repeat

Random

File shift

Tap the REPEAT icon to repeat the selected file.

Tap the RANDOM icon to randomly play the files loaded on the card.

Tap “Next” to play the next file and Tap “Previous” to play the previous piece of music.

Tap the “X” to return to the file list interface.

2.3 Photo

1. Tap the “photo” icon on the main interface to enter into the picture browse interface:

Double tap on the file name to enter into the following interface:

File shift

Document Name

1. Tap “Previous” button to display the previous picture, tap “Next” button to display the next

picture.

2. Tap “Full Screen” button to display the picture in full screen as follows:

Full Screen

3. The picture will be displayed automatically at full screen mode, and tap the screen to return to the following interface:

4. Tap the “X” to return to the picture list interface.

2.4 Ebook

1. Tap the “E-book” icon on the main interface to enter into the Ebook interface:

+ 28 hidden pages