Curtis DVD3602UKT User Manual

Download

HDMI DVD PLAYER

User`s Guide

After Sales Support

Now you have purchased a Tevion product you can rest

assured in the knowledge that as well as your 3 year parts

and labour warranty you have the added paece of mind of

dedicated helplines and web support:

Environmental Protection Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or retailer for recycling advice.

MODEL NUMBER: DVD3602UKT

IMPORTANT SAFETY INSTRUCTIONS

Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with the product. Any mounting of the product should follow the manufacturer’s instructions, and

The lightning flash with arrowhead symbol within an equilateral triangle

presence of uninsulated dangerous voltage within the product’s enclosure that may of sufficient magnitude to constitute a risk of electric shock to persons.

operating and maintenance (servicing) instructions in the literature accompanying the appliance.

1. READ INSTRUCTIONS

operating instructions should be read before the product is operated.

2. RETAIN INSTRUCTIONS

operating instructions should be retained for future reference.

3. HEED WARNINGS

product and in the operating instructions should be adhered to.

4. FOLLOW INSTRUCTIONS

use instructions should be followed.

5. CLEANING

outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a soft dry cloth for cleaning.

6. ATTACHMENTS

recommended by the product manufacturer as they may cause hazards.

7. WATER AND MOISTURE

product near water - for example, near a bath tub, wash bowl, kitchen sink, or laundry tub; in a wet basement; or near a swimming pool; and the like.

intended to alert the user to the

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important

- All the safety and

- The safety and

- All warnings on the

- All operating and

- Unplug this product from the wall

- Do not use attachments not

- Do not use this

should use a mounting accessory recommended by the manufacturer. A Product and Cart Combination Should Be Moved with Care - Quick stops, excessive force and uneven surfaces may cause the product and cart combination to overturn.

9. VENTILATION

are provided for ventilation and to ensure reliable operation of the product and to protect it from overheating, and these openings must not be blocked or covered.The openings should never be blocked by placing the product on a bed, sofa, rug or other similar surface.This product should not be placed in a built-in installation, such as a bookcase or rack, unless proper ventilation is provided or the manufacturer’s instructions have been adhered to.

10. POWER SOURCES

operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult a professional electrician or local power company. For products intended to operate from battery power, or other sources, refer to the operating instructions.

11. POWER-CORD PROTECTION

cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where exit from the product.

- Slots and openings in the cabinet

- This product should be

- Power supply

8. ACCESSORIES

an unstable trolley, stand, tripod, bracket, or table. The product may fall, causing serious injury to a child or adult, and serious damage to the product.

Helpline No . UK/Northern lr ela nd 0800 032 5264 Rep. lr ela nd 1800 315 697 W eb S upport www.curtisint.com Model Number: DVD3602UKT

- Do not place this product on

IMPORTANT SAFETY INSTRUCTIONS

. NONUSE PERIODS -The power cord of the

product should be unplugged from the outlet when left unused for long periods of time.

13. OUTDOORANTENNA GROUNDING

-Ifan outside antenna or cable system is connected to the product, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Below diagram provides information with regard to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements for the g rounding electrode. See Figure 1.

EXAMPLE OFANTENNA GROUNDING

14. LIGHTNING

GROUND CLAMP

ELECTRIC SERVICE SQUIPMENT

- For added protection for this

ANTENNA LEAD WIRE

ANTENNADISCHARGE UNT

GROUNDING CONDUCTORS

GROUD CLAMP

POWER SERVICEGROUNDING ELECTRODE SYSTEM

product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system.This will prevent damage to the product due to lightning and power-line surges.

15. POWER LINES

- An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or other electric light or power circuits. When installing an outside antenna system, extreme care should be taken to keep from touching power lines or circuits as contact with them might be fatal.

16. OVERLOADING

- Do not overload wall outlets, extension cords, or integral convenience receptacles a s this can result in a risk of fire or electric shock.

17. OBJECTAND LIQUID ENTRY

- Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product.

18. SERVICING

- Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

19. DAMAGES REQUIRING SERVICE

Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions. a) When the power-supply cord or plug is damaged. b) If liquid has been spilled, or objects have fallen

into the product. c) If the product has been exposed to rain or water. d) If the product does not operate normally by

following the operating instructions. Adjust only

those controls that are covered by the operating

instructions as an improving adjustment of other

controls may result in damage and will often

require extensive work by a qualified technician

to restore the product to its normal operation. e) When the product exhibits a distinct change in

performance - this indicates a need for service.

20. REPLACEMENT PARTS

parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part, Unauthorized substitutions may result in fire, electric shock or other hazards.

21. SAFETY CHECK

service or repair to this product, ask the service technician to perform safety checks to determine that the product is in proper operating condition.

22. HEAT

- The product should be situated away from heat sources such as radiators, heat registers, stoves or other products (including amplifiers) that produce heat.

Keep minimum distances (5cm) around the apparatus

23.

for sufficient ventilation.

The ventilation should not be impeded by covering the

24.

rear panel for ventilation with items, such as newspapers, table-cloths, curtains, etc.

No naked flame sources, such as lighted candles,

25.

should be placed on the apparatus.

Don’t use the apparatus in tropical climates.

26.

Where the mains plug is used as the disconnect

27.

device, the disconnect device shall remain readily operable.

The apparatus shall not be exposed to dripping or

28.

splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus.

Attention should be drawn to the environmental

29.

aspects of battery disposal. Don’t throw used batteries in dustbin. Please contact your retailer in order to protect the environment.

- When replacement

- Upon completion of any

TROUBLESHOOTING

Check the chart below for a possible cause of the problem you are experiencing before requesting service for this unit, Some simple checks or minor adjustment on your part may eliminate the problem and restore proper operation. Let the technician maintain the unit. Keep away from static electricity properly before maintenance as loader, key IC are easy to be damaged by it.

Trouble

No power

Cannot read disc

No picture

No sound

Picture is distorted during fast forward or reverse

No (4:3)(16:9) picture

Remote control does not function

Unit s or remote control buttons are not functioning or other abnormal phenomena

Audio soundtrack and/ or subtitle language not found in settings

Can not change angle

No playback menu

Miscellaneous

Plug the power cord into the power outlet tight to turn on/off once

Disc access time within 10-20 seconds is normal The disc is scratched or defiled (change disc) The code of disc is different from the code of unit (change the disc) PALto NTSC error (Set video output as AUTO)

If your TV does not have P-Scan function, pressing VIDEO button on the remote may cause this. Press VIDEO button again to rectify.

Ensure that the equipment is connected properly. Ensure that the TV or audio equipments are not muted. Ensure that the audio output setting is correct.

The picture will be somewhat distorted at times. This is normal advance or reverse.

Choose the correct setup at TV TYPE item that matches the TV set.

Check the batteries being installed with correct polarities. Replace the batteries depleted. Point at remote control sensor and operate it within 5 meters.

Turn the unit off and then back to on.Alternatively, turn off the unit, disconnect the AC power cord for 5 to 10 minutes and then reconnect it.

If the audio soundtrack and/or subtitle language does not exist in the disc, the language selected at the initial settings will not be seen/heard. Alternative audio soundtrack (or An alternative language is not selected with discs which contain subtitle) language cannot be more than one language selected.

This function depends on software availability. Even if a disc has a number of angles recorded, these angles may be recorded for specific scenes only.

This function is suitable for VCD with playback control disc. In program playing mode, no repeat, A-B functions are available.

Suggested solution

Helpline No . UK/Northern lr ela nd 0800 032 5264 Rep. lr ela nd 1800 315 697 W eb S upport www.curtisint.com Model Number: DVD3602UKT

Helpline No . UK/Northern lr ela nd 0800 032 5264 Rep. lr ela nd 1800 315 697 W eb S upport www.curtisint.com

Model Number: DVD3602UKT

REFERENCE

Definition of terms

Angle

Recorded onto some DVD discs are scenes which have been simultaneously shot from a number of different angles (i.e. The same scene is shot from the from, left side and right side etc.). With such discs, the ANGLE button can be used to view the scene from different angles.

Chapter Number

These numbers are recorded on DVD discs,A title is subdivided into many sections. Each of them is number and specific parts of video presentations can be searched quickly using these numbers.

DVD disc

This refers to a high-density optical disc on which high quality pictures and sound have been recorded by means of digital signals. Incorporating a new video compression technology (MPEG2) and highdensity recording technology, DVD enables full-motion video to be recorded over long periods of time (for instance, a whole movie can be recorded).

Subtitles

These are the printed lines appearing at the bottom of the screen which translate or transcribe the dialogue. They are recorded on DVD discs and up to 32 languages.

PBC

The language indicates on TV screen to imply operation or disc information.

Audio

Language recorded on discs and the maximum languages are up to 8.

Time

This indicates the play time elapsed from the start of a disc or a title. It can be used to find a specific scene quickly (it may not work with some discs).

Title Number

These numbers are recorded on DVD discs. When a disc contains two or more movies, these movies are numbered as title1, title2, etc.

Track Number

These numbers are assigned to the tracks which are recorded on audio CDS. They enable specific tracks to be located quickly. RAW The original DTS, AC-3 signals non-decoded. If users choose RAW as audio setting, they must connect a decoder to decode those original audio signals.

SPECIFICATIONS

Power requirement: AC 100-240V~50/60Hz Power consumption: 10W Signal system: NTSC/PAL/AUTO Dimension: 360mm x 38mm x 250mm

Disc played:

1. DVD-video disc 12cm single-sided, single-layer 12cm single-dided, double-layer 12cm double-dided, double-layer 8cm single-sided, single-layer 8cm single-sided, double-layer 8cm double-sided, double-layer

Video output

Output level: 1+0.2Vp-p (75 ohm) Horizontal resolution: >500 lines S/N ratio: >60dB

Audio output (Impedance: 10k ohm):

Output level: 1.8+0.2/-0.8Vrms (1KHz 0dB) Harmonic distortion: <0.01% (JIS-A 1KHz, typical) Dynamic range: >80 dB (JIS-A 1KHz, typical) S/N ratio: 90dB (JIS-A 1KHz, typical)

2. CD disc 12cm disc 8cm disc

IMPORTANT SAFETY INSTRUCTIONS

To protect intellectual property, the involved organizations partition the world into six regions, each of which can only use the DVD player and DVD disc with the given regional code. The illustration on the right shows symbols of the six regions. One DVD player with a given regional code cannot play disc of another regional code. The partition of regional codes is shown as follows:

1. Canada, USA;

2. Japan, Europe, South Africa, Middle East

3. Southeast Asia, East Asia

4. Australia, New Zealand, Oceania, Central America, Mexico, Latin America, Caribbean Sea;

5. Russia, India, Africa, Korea, Mongolia.

6. China.

Note: THE REGION CODE FOR THE UNIT IS 2.

TV connections for DVD discs recorded in PAL and NTSC systems

Generally, DVD discs are recorded in PAL or NTSC systems, please refer to the following table:

Connecting to the multi-system TV

DISC

PAL

NTSC

Connecting to NTSC TV Connecting to PAL TV

DISC

PAL

NTSC

TV MONITOR

No clear images are shown on the screen.

Play in NTSC system

TV MONITOR

Play in PAL system

Play in NTSC system

NTSC

DISC

PAL

TV MONITOR

Play in PAL system

No clear images are shown on the screen.

Weight and dimensions are approximate Specifications are subject to change with or without notice.

Helpline No . UK/Northern lr ela nd 0800 032 5264 Rep. lr ela nd 1800 315 697 W eb S upport www.curtisint.com Model Number: DVD3602UKT

Please read the user manual carefully before connection or operation

TABLE OF CONTENT

Important Safety Features Precautions Accessories Front Panel Rear Panel Remote Control Basic Connection Remote Control Preparation Operations Preparation Play Stop Prev/Next Rev/Fwd Slow Step Pause Number(0-9,10+) button Mute VOL+/VOLReturn Osd Zoom A-B Repeat Repeat Angle Audio Program PBC Time Menu Subtitle Video N/Pl Shuffle Reset USB/CART Setup Reference(Menu/Submenu/Options) HDMI setup Handing Precautions player Maintenance Definition of terms Specifications Troubleshooting

1 5 5 6 6 6 7 8 11 12 12 12 12 12 12 12 12 12 12 13 13 13 13 13 13 13 13 13 13 13 14 14 14 14 14 14 14 14 15 16 17 17 17 18 18 19

REFERENCE

AUDIO

Rating

MISC

HDMI SETUP

In setup mode, Press button on remote control to select video, then press button to select HD. Press button to select HD resolution, Press button to select Auto,480P/576P,720P,1080i,1080P , etc HDMI output mode. Press button to select audio digital output for PCM. Remarks:It is only apply to TV with HDMI jack.

Handling Precautions

Maintenance

Hold the disc by the edge so the surface will not be soiled with fingerprints. Fingerprints, dirt and scratches can cause skipping and distortion. Do not use record cleaning sprays, benzene, thinner. Static electricity prevention liquids or any other solvent. Be careful not to drop or bend the disc. Do not try to close the disc tray when disc is not installed properly. Be sure to store the disc in its exclusive case when not in use.

Handling

Wipe gently with a soft, damp (water only) cloth. Move the cloth from the centre hole towards the outer edge. lmproper disc disc storage: Discs may be damaged if they are stored in the following places: Areas exposed to direct sunlight; Humid or dusty areas; Areas directly exposed to a heat outlet or heating appliance.

Player Maintenance

Be sure to turn the unit off and disconnect the AC power cord before maintaining the unit. Keep the unit clean. If the surfaces are extremely dirty, wipe the unit with a dry soft cloth. Never use alcohol, benzene or other chemicals. Do not use compressed air to remove dust. Ask the technician to maintain the unit when trouble happens.

SUBMENU OPTIONS DESCRIPTION

Subwoofer

Test tones

Center delay

Surr.delay

Digital output

Passwood

Rating

Default Return to factory setupRead

None Present

Off Left Right Center Left surr. Right surr. Subwoofer

No Delay

0.3m

0.6m 1m

1.4m

1.7m No Delay

1m 2m 3m 4m

5.1m

OFF PCM ALL

----------

1.Kid safe

2.G

3.PG

4.PG-13

5.PG-R

6.R

7.NC-17

8.ADUIT

When Audio output 2.0 CH select none

Test tones off Test Left Test Rig ht Test

Center

Test

Left surr.

Test

Right surr.

Test

Subwoofer

Center delay time

Surround delay time

Digital output OFF Digital output PCM Digital output RAW

Input number by users to change password, default setting 8888

Suitable for children. Suitable for all age groups.

The presence of parents is recommended. Some scenes may be unsuitable for children.

The presence of parents is strictly recommended. Some scenes may be unsuitable for children under the age of 13.

The presence of parents is strictly necessary.

Young persons under the age of 17 may only view this film in the presence of an adult.

Children and juveniles under the age of 17 are not allowed to watch this film.

The film must only be watched by adults.

“”

Helpline No . UK/Northern lr ela nd 0800 032 5264 Rep. lr ela nd 1800 315 697 W eb S upport www.curtisint.com Model Number: DVD3602UKT

Helpline No . UK/Northern lr ela nd 0800 032 5264 Rep. lr ela nd 1800 315 697 W eb S upport www.curtisint.com

Model Number: DVD3602UKT

REFERENCE

Menu, Submenu and Options

LANGUAGE

VIDEO

AUDIO

SUBMENU OPTIONS DESCRIPTION

Language

Subtitle

Audio

DVD menu

Aspect Ratio

View mode

TV System

Video out

HD Resolution

Bass management

Front speakers

Center Speaker

Surround Speakers

English Français

Español Deutsch Itoliano English French Spanish German Italian Auto Off English French Spanish German Italian English French Spanish German Italian 4:3

16:9

Fill

Original

Auto fit

Pan scan NTSC

PAL AUTO S-VIDEO

Component

RGB P-SCAN HD

Auto 480p/576p 720p 1080i 1080p Off On Large Small Large Small None Large Small None

English On Screen Display

On Screen Display

French

On Screen Display

Spanish

On Screen Display

German

Italian On Screen Display

English On Screen Display

On Screen Display

French Spanish

On Screen Display

German

On Screen Display Italian On Screen Display Auto On Screen Display Off On Screen Display English On Screen Display

On Screen Display

French

On Screen Display

Spanish German

On Screen Display Italian On Screen Display English On Screen Display

On Screen Display

French

On Screen Display

Spanish

On Screen Display

German

Italian On Screen Display

Set TV screen at 4:3 Set TV at screen 16:9

Scale up/down the image in horizontal and vertical direction respectively to fill the screen height and width Like letter box.Take the minimum value of horizontally fit scale ratio and vertically fit scale ratio Take the maximum value of horizontally fit scale ratio and vertically fit scale ratio. Fit the original screen size. (Only for Divx / MPEG)

Output signal as NTSC Output signal as PAL Output signal as per default of disc S-VIDEO video output Component video output

RGB video output P-SCAN video output HDMI switch HDMI auto output

HDMI output480p/576p HDMI output720p HDMI output1080i HDMI output1080p

Bass management off

Bass management on

When Audio output 2.0 CH select small

When Audio output 2.0 CH select none

FEATURES

DVD - A completely new dimension in video entertainment

Subtitles may be displayed in one of a maximum of 32 languages available (multi-subtitles DVD only). Audio soundtrack can be heard in up to 8 languages (multi-languages DVD only). Multi-angle function allows you to choose the viewing angles of scene (for DVD with multiple camera angles only).

Other convenient features

Parental lock settings to prevent playing unsuitable discs for some audiences (DVD only). A full function remote control provides quick access to DVD functions.

Compatible with PAL DVD and NTSC DVD

This player can play discs recorded in either PAL or NTSC system.

Compatible with CD besides DVD, MP3, CD-R

This player could play various discs such as DVD, CD (8cm/12cm discs).

PRECAUTIONS

Please read these precautions before operating this unit.

Power cord protection

To avoid any malfunctions of the unit, and to protect against electric shock, fire or personal injury, please observe the following. Hold the plug firmly when connecting or disconnecting the AC power cord to this unit. Do not connect or disconnect the AC power cord when your hands are wet. Keep the AC power cord away from heating appliances. Never put any heavy object on theAC power cord. Do not attempt to repair or reconstruct the AC power cord. Remove dust, dirt etc. on the plug regularly. If the unit has been dropped or otherwise damaged, turn off the power and disconnect the AC power cord. If you find smoke, unusual odour or noise from the unit, turn off the power and disconnect the AC power cord.

Placement

The internal parts may be seriously damaged if the unit is placed in areas of:

Direct sunlight or heating radiators or closed automobiles; High temperature (over 35 C) or high humidity (over 90%) Excessive dust; Strong magnetic or static electricity; Vibration, impact or where the surface is tilted.

Non-use Periods

Turn off the power when the unit is not used. It should be unplugged when the unit is idle for a long period of time.

No fingers or other objects inside

Touching internal parts of this unit is dangerous, and may cause serious damage to the unit and even human injury. Do not try to disassemble this unit. Do not put any other object on the disc tray.

Keep away from water and magnets

Keep the unit away from flower vases, tubs, sinks, etc. If liquids are spilled into the unit, serious damage could occur. Never place magnetic objects such as speakers near the unit.

Stacking

Place the unit in a horizontal position and do not place anything heavy on it. Do not put the unit on amplifiers or other equipment.

Condensation

Moisture may form on the lens under the following conditions:

In a steamy or very humid room. Immediately after a heater is turned on. If moisture forms inside this unit, it may not operate properly. In this case, turn on the power and wait for about 1 hour to evaporate it.

Interference for the TV broadcast

Depending on the reception condition of the TV, interference may appear on the TV screen while you are watching a TV broadcast and the unit is turned on, This is not a malfunction of the unit of the TV. Just ensure that the unit is turned off when you watch a TV broadcast.

Helpline No . UK/Northern lr ela nd 0800 032 5264 Rep. lr ela nd 1800 315 697 W eb S upport www.curtisint.com Model Number: DVD3602UKT

ACCESSORIES

(Please check whether all the following accessories are available after unpacking.)

POWER

OPEN/CLOSE

OSD P/N REPEAT A-B

ANGLE

SHUFFLE

VIDEO

SUBTITLE

10+

TIME

MUTE

STEP L/R

SETUP

ENTER

RESET

TITLE

PBC PAUSE PLAY STOP

REV

DVD3602UKT

SLOW

ZOOM

PREV NEXT

+10

PROG

16:9/4:3VOL

AUDIO

RETURN

USB/CARD

Instruction

Manual

Video/Audio cord

A Pair of Batteries

HDMI cord

Remote control

FRONT PANEL

SETUP

Once the initial settings have been completed, the player can always be operated under the same conditions (especially with DVD discs). The settings will be retained in the memory even after turning off the power until the settings are changed. We set the initial language to English when the player is out of factory. You may change the language into that you preferred. Operation

1. Press SETUP button to enter setup interface as followed, you can setup Language, Video, Audio,Rating,Misc.

POWER

DVD3602UKT

1. Power switch key

2. Open/Close key

3. Play/Pause key

4. Stop key

5. Disc tray

REAR PANEL

Y Pb/Cb Pr/Cr

L R COAXIAL

AUDIO

1 342 6 7 8 9

1. Left audio output jack

2. Right audio output jack

3. Digital signal coaxial output jack

4.Component output jacks (Y, Pb,Pr)

5. Video output jack

HDMI

VIDEO

S-VIDEO OPTICAL

FL FR SW

SL SR CEN

OPEN/CLOSE PLAY/PAUSE STOP

DVD/CD/MP3/MPEG4 PLAYER

6. Display window

7. Remote control sensor

8. SD/MMC

9. USB

10. Cover open

WARNIN G

RISKOF ELECTRIC SHOCK

DONOT OPEN

SCARTOUT

CLASS 1 LASERPRODUCT

6. HDMI output jack

7. S-video output jack

8. Optical output jack

9. 5.1 channel output jack

10.Scart out output jack

11.AC power cord

DVDPLAYER

MODELNO.:DVD3602UKT ~100-240V50/60Hz POWER:10W

8 9

~100-240V

50/60Hz

MADEIN CHINA

2. Press and to choose the desired section and ENTER button to enter submenu or press SETUP to leave the setup Video. Following is the language setup Video for your reference where you can set OSD menu, Subtitle, Audio Language and DVD menu Language.

Helpline No . UK/Northern lr ela nd 0800 032 5264 Rep. lr ela nd 1800 315 697 W eb S upport www.curtisint.com Model Number: DVD3602UKT

Helpline No . UK/Northern lr ela nd 0800 032 5264 Rep. lr ela nd 1800 315 697 W eb S upport www.curtisint.com

Model Number: DVD3602UKT

OPERATION

REMOTE CONTROL

TIME

In the play, you press TIME and button on the remote control. You can search the disc

based on its title/chapter/track as shown in the figure. Press TIME button, a search menu will display. Use or button to select the search item/time/title/chapter. The selected will be shown in highlight. Use number button to select the search item/time/title/chapter, and press ENTER button to play.

Note:

For some DVD discs which cannot be searched, invalid will be appear on TV screen. Input the time, title and chapter of the disc to search. For VCD in PBC mode is ON, it can only search for the time.

Press MENU button on remote control when playing a disc, a list of titles on the disc (depends on discs) will be displayed on TV monitor. Use the direction or number button to select your preferred items then press ENTER button to play as selected.

SUBTITLE

Press SUBTITLE button on remote control during playback. Subtitle: [1] will be displayed on TV monitor that means a kind of language. Press once more, Subtitle: [2] appeared on TV monitor means another kind of language and accordingly subtitles appear that represents how many kind os language being selected. Subtitle: [OFF] appears that toggle subtitle.

Note:

This function is valid only for DVD discs with subtitle function. It is invalid for DVD disc with single

subtitle function.

VIDEO

Press VIDEO button during stop state to use direction to select the video output progressive scan (YPbPr) or other mode (S-VIDEO,Component,RGB,P-SCAN, HD).

N/P

Press N/P button during stop state can switch output signal to NTSC, PAL or AUTO. The default setting is PAL.

SHUFFLE

Press SHUFFLE button while playing DVD /MP3/CD/JPG or VCD disc(PBC OFF), the player will playing the disc randomly.

RESET

Press RESET button to resume the original setting of this unit.

USB/CARD READER PLAY

This DVD player can compatible with the playing function of USB flash disc and CART reader. You connect the USB or SD/MMC/MS card to the USB port or CARD port , press USB/CARD button on the remote control. Then press button to USB, Press ENTER button to USB flash disc or SD/MMC/MS card, press button to select

your prefered title or chapter, press ENTER button to play.

1. Power button

2. A-B button

3. Repeat button

4. Angle button

5. Subtitle button

6. Program button

7. Slow button

8. 16:9/4:3 button

9. L/R button

10. Audio button

11. Return button

12. Zoom button

13. USB/CARD button

14. Stop button

15. Play button

16. Next button

17. Prev button

18. FWD button

19. REV button

20. Pause button

21. PBC button

22. TITLE button

23. Menu button

24. Reset button

25. Button

26. Enter button

27. Setup button

28. Step button

OPEN/CLOSE

36 35 34

31 30

27 26

24 23

19 18

OPEN/CLOSE

OSD P/N REPEAT A-B

SHUFFLE

VIDEO

SHUFFLE

VIDEO

TIME

MUTE

STEP L/R

SETUP

RESET

TITLE

PBC PAUSE PLAY

REV

SUBTITLE

SLOW

ENTER

ZOOM

POWER

ANGLE

10+

+10

PROG

16:9/4:3VOL

RETURN

USB/CARD

STOP

PREV NEXT

AUDIO

29.Vol+/Vol-button

30. Mute button

31. Time button

32. Number (0-9) button

33. Video button

DVD3602UKT

34. Shuffle button

35. P/N button

36. OSD button

37. Open/Close button

Note:

The same buttons on remote control and front panel have identical functions.

2 3 4

6 7

8 9

11 12 13

Helpline No . UK/Northern lr ela nd 0800 032 5264 Rep. lr ela nd 1800 315 697 W eb S upport www.curtisint.com Model Number: DVD3602UKT

BASIC CONNECTION

OPERATION

Ensure that the power switch of this unit and other equipment to be connected is turned off before commencing connection. Read through the instructions before connecting other equipment. Ensure that you observe the colour-coding when connecting audio and video cords.

A: Connecting to a stereo TV set

1. TV set (optional)

2. DVD/CD player

3. Connecting Video, R/L audio cords

4. To TV set audio input connector

5.Connecting cord to Scart jack(option)

6.To Scart jack To get the best viewing quality you are advised to use S-video cord to connect the TV set with S-video input and to change the TV set to S-video input mode.

B: Connection to monophonic TV

1. TV set (optional)

2. DVD/CD player

3. Audio cords

4. To TV set audio input connector

5. To TV set video input connector

6.Component connector cord (optional)

7.To TV component (Y,Pb/Cb,Pr/Cr)input connector

C: Connection to audio equipment

1. Audio player (optional)

2. TV set (optional)

3. DVD/CD players

4. Video/audio cords

5. To TV video input connector (yellow)

6. To audio input connectors (red, white)

7. To TV S-video input connector

MUTE

Press MUTE button during play, the player shows and there is no audio output (silence), Press again to cancel MUTE.

VOL+/VOL-

Press VOL+/VOL- button play may change volume for audio output.

RETURN

For VCD when playing 2.0 PBC is operating. Press RETURN key, it will return to menu mode. When playing DVD/MP3/JPG discs. Press RETURN key, it will return to menu mode.

VIDEO

YPb/CbPr/Cr

L R COAXIAL

AUDIO

YPb/CbPr/Cr

L R COAXIAL

AUDIO

YPb/CbPr/Cr

L R COAXIAL

AUDIO

FL FR SW

HDMI

S-VIDEO OPTICAL

VIDEO

HDMI

S-VIDEO OPTICAL

VIDEO

HDMI

S-VIDEO OPTICAL

SL SR CEN

FL FR SW

SL SR CEN

FL FR SW

SL SR CEN

SCARTOUT

OSD

Press OSD button during play to show the disc s relevant information on TV screen(such as playing time, chapter number, playback status).

ZOOM

Zoom function can only be operated in JPEG disc and VCD/DVD format disc. By pressing zoom

when playing DVD/VCD discs, there are 3 levels of zoom available ( 1, 2, 3)

button When playing JPEG disc, there are 3 levels of zoom available( 1, 2, 3) Note: Zoom function is not working on PAL system DVDs.

MP3 does not have this function

A-B REPEAT

Press A-B button during playback at the point where repeat play is to commence (a) then press again at the point where repeat play is to be concluded (B). Repeat playback between point (A) and point (b) starts. Press A-B button once more where TV screen appears REPOFF to return to normal play.

REPEAT

Press the repeat key to choose repeat play chapter or title (DVD) and play single audio or full disc (VCD, CD, MP3).

Note: Some VCD do not have repeat function with PBC ON state.

ANGLE

Press ANGLE continuously during playback DVD disc to toggle the disc between available angles recorded on the disc if the disc has multi-angle function.

AUDIO

Press AUDIO button during playback to toggle between available audio language recorded on the disc if the disc has this multi-language.

Press AUDIO button could toggle available audio language soundtracks.Note:

PROGRAM

Press PROG button, the program playback screen appears on the TV monitor, 12 tracks or chapters can be programmed. Use number(0-9,10+) and button on the remote control to select your preferred track (CD/VCD) or title and chapter (DVD), press button to play , then press ENTER button to confirm.“” press button to “clear program”, then press ENTER button to clear program. You can only press the PLAY button on the remote control to start playing after you finish the program setting. Press the PROG button directly to return to normal play mode. In this case, the program is not confirmed.

CD/MP3 PROGRAM

Press PROG button, the program playback screen appears on the TV monitor,

Select the “Edit mode” on theTV screen and press divect key “ ” to program and select track. press “ ” button select “and to program” then press the “ENTER” and select “program view”. Press the “Play” button to program playing.

Helpline No . UK/Northern lr ela nd 0800 032 5264 Rep. lr ela nd 1800 315 697 W eb S upport www.curtisint.com Model Number: DVD3602UKT

PBC function (only VCD)

When playing VCD 2.0 press PBC button to display title menu use number key choice and ENTER button to play music.

Helpline No . UK/Northern lr ela nd 0800 032 5264 Rep. lr ela nd 1800 315 697 W eb S upport www.curtisint.com

Model Number: DVD3602UKT

OPERATION

PREPARATION BEFORE PLAYING DISC

The option of display language catalogue is preset to English. Please refer to Setup operation Most functions are operated by remote control. Either operation of remote control of front panel is effective when their buttons indicate the same function.

Preparation

Turn the TV on and select AV as the TV input. Switch on the related system power if the player has been connected to amplifier equipment etc.

PLAY

1. Connect AC power cord to AC outlet.

2. Switch on the power, the displayed LOADING indicates the normal power supply. (Note: the disc

information appears after several seconds if there has disc after LOADING displayed otherwise appears NO DISC).

3. Press OPEN/CLOSE.

4. Place a disc (8cm or 12cm) onto the tray. (For one-sided disc, position it with printed title side facing

up. For two-sided disc, position side to be playback facing down).

5. Press OPEN/CLOSE again to close disc tray.

6. Press PLAY to playback disc.You may operate according to MENU indication after MENU shows on

screen then press ENTER button to play back. Some discs may play automatically after loaded.

BASIC CONNECTION

D: Connecting to AV amplifier with 2-channel input connector

1.TV set (optional)

2.DVD / CD player

3.Video / Audio cords / S-video cord (optional)

4.Amplifier with 2 channel input connectors

5.To audio input connector (L,R)

6.Left speaker

7.Right speaker

YPb/CbPr/Cr

L R COAXIAL

AUDIO

VIDEO

FL FR SW

HDMI

S-VIDEO OPTICAL

SL SR CEN

SCARTOUT

STOP

Press STOP button to stop playing (TV show ). When play back is stopped the“STOP” unit records the point where STOP was pressed (resume function). Press PLAY again, and play will resume from this point. Press STOP button twice, resume function will be cancelled.

PREV/NEXT

Press PREV button or NEXT button on remote control when playing a disc, a chapter (DVD) or a track (CD) is skipped backward or forward correspondingly each time the button is pressed.

REV/FWD

Press REV/FWD button on the remote control during playback, the disc will be played in a status of forward or reverse correspondingly. Forward or Reverse speed is relatively slow at first. When press again, the speed becomes faster. The more times that you press the buttons, the faster the fast forward or reverse speed will be. There are 5 levels of speed available: X2, X4, X8and X16. To return to normal Play, press PLAY button on the player or the remote control.

Note: Some discs including MP3 disc have no such function.

SLOW

Press SLOW button on the remote control during playback and the unit will enter slow forward status. There are 5 speeds available: 1/2,1/4,1/6 and 1/8. To return to normal play. Press PLAY button on player or remote control again.

Note: Some discs including MP3 disc have no such function.

STEP

Press STEP button during play, the player will enter the still picture mode. If the button is pressed again, the disc is advanced by one frame (step). When the button is kept pressed, consecutive frame advance works. To return to normal play, press PLAY button.

Note: Some discs do not have such function.

PAU SE

Press PAUSE key to stop playing and restore play by pressing PLAY key again.

Number (0-9,10+) button

By pressing the Number (0-9) button, you can access directly to the desired track or chapters while a disc is played. For track or chapter over 10, press 10+ and then 0-9 button.

E: Connecting to TV HDMI connector

1.TV set (optional)

2.DVD / CD player

3.HDMI cord (optional),

4.to TV HDMI input connector

VIDEO

YPb/CbPr/Cr

L R COAXIAL

AUDIO

FL FR SW

HDMI

S-VIDEO OPTICAL

SL SR CEN

SCARTOUT

Helpline No . UK/Northern lr ela nd 0800 032 5264 Rep. lr ela nd 1800 315 697 W eb S upport www.curtisint.com Model Number: DVD3602UKT

BASIC CONNECTION

REMOTE CONTROL PREPARATION

F: Connecting to an external decoder or a power amplifier

When DVD discs recorded in Dolby digital, MPEG audio or other formats are played, corresponding bit stream is output from the player s COAXIAL digital audio output connector. When the player is connected to an external decoder or a power amplifier, you can enjoy quality of theatre level at your home!

recording format

Sound

Digital output setting

TV set(optional)

PCM(44.1KHZ sampling)*1

Dolby digital

DVD

DTS

Linear PCM

Other

Linear PCM

MP3

*1 sound having 192KHz sampling is converted to 48KHz sampling when it is output from the Coaxial digital audio output connector.

Note:

method.

For your reference:

Dolby Digital (AC-3),a digital sound compression technique developed by the Dolby Laboratories Licensing Corporation supports 5.1-channel surround output and stereo sound system enables the capacity of mass storage recorded in discs Linear PCM is a signal-recording format used in CD s While CD s are recorded in 44.1KHz/16bit, DVDs are 48KHz/16bit up to 192KHz/24bit.

Caution for the coaxial audio output connector.

Do not connect an amplifier (with an Coaxial digital input connector) which does not contain the Dolby Digital (AC-3) or MPEG audio decoder, otherwise it maybe harmful to your ears and damage your speakers, Choose RAW in the digital audio setup to activate coaxial or optical output when playing disc with DTS output.

MP3

Please refer to the setup operations for setup

Raw

OFF

Raw OFF PCM(44.1KHZ sampling)

PCM(44.1KHZ sampling) PCM(44.1KHZ sampling) PCM(44.1KHZ sampling)

Video/audio (optional)

DVD/CD player

YPb/CbPr/Cr

L R COAXIAL

AUDIO

5.1 CH

(optional)

Decoder of amplifier with Dolby digital (AC-3) orMPEG (optional)

Euro SCART (optional)

S-Video cord (optional)

VIDEO

FL FR SW

HDMI

S-VIDEO OPTICAL

SL SR CEN

SCARTOUT

Coaxial audio

cord

Battery Installation

Insert the batteries while observing the positive (+) and Negative (-) polarities as Figure A.

Service life of batteries

The batteries normally last for a year although this depends on the operation and on how often the remote control is used. If the remote control unit fails to work even when it is operated near the player, replace the batteries with new ones. Use size AAA UM-4 batteries (2 pieces).

Notes:

Do not use rechargeable (Ni-Cd) batteries. Install batteries correctly observing the (+/-) polarity signs. Do not drop, step on the remote control, otherwise it may damage the parts or lead to malfunctioning. Use only the recommended battery type or equivalent (voltage and size). Always replace a complete set of batteries at the same time. Do not mix batteries of different types. Never mix new and used batteries in the same compartment. Remove exhausted batteries immediately. Remove batteries when product is not in use. Do not dispose of batteries in fire as they may explode. Do not recharge non-rechargeable batteries. Do not short circuit the supply terminals. Ensure batteries are stored away from metal objects as contact may cause a short circuit. Remote control operation range is no more than 5 m from and within about 60 degree wide in front of the unit (Figure B).

Notes:

Do not point bright lights to the remote control sensor. Do not place objects between the remote control and the remote control sensor. Do not use this remote control together with the remote control of any other equipment.

Remark:

Batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like.

POWER

DVD3602UKT

Among 5meters

Remoto controlsensor

DVD/CD/MP3/MPEG4PLAYER

OPEN/CLOSE

OSD P/N REPEAT A-B

VIDEO

SUBTITLE

SHUFFLE

TIME

MUTE

SLOW

STEP L/R

SETUP

ENTER

RESET

TITLE

ZOOM

PBC PAUSE PLAY STOP

PREV NEXT

REV

DVD3602UKT

OPEN/CLOSE PLAY/PAUSE STOP

POWER

ANGLE

3 6 9

10+

+10

PROG

16:9/4:3VOL

AUDIO

RETURN

USB/CARD

Helpline No . UK/Northern lr ela nd 0800 032 5264 Rep. lr ela nd 1800 315 697 W eb S upport www.curtisint.com Model Number: DVD3602UKT

Curtis DVD3602UKT User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual