Curtis DVD 1084 User Manual

DVD PLAYER USER MANUAL

DVD 1084

DVD1084 DVD/VCD/CD PLAYER

POWER

SD Card/Memory Stick

Multi Media Card

USB Socket

Please read this user manual carefully to ensure proper use of this product and keep this manual for further reference

* Important Safety Instruction

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

The lightning flash with arrowhead symbol within a triangle, alerts the user to [dangerous voltage ] which could cause electric shock .

The exclamation point within a triangle indicates to the user to read important operating and maintenance instructions in the manual.

1)Read these instructions.

2)Keep these instructions.

3)Heed all warnings.

4)Follow all instructions.

5)Do not use this apparatus near water.

IMPORTANT FOR LASER PRODUCTS

1.CLASS 1 LASER PRODUCT

2. DANGER:Visible laser radiation when open and interlock failed or defeated.Avoid direct exposure to beam.

3.CAUTION:Do not open the top cover. There are no user service-able parts inside the unit. Leave all servicing to qualified service personnel.

WARNING:To reduce thr risk of the fire or electric shock.DO NOT expose this product to rain or moisture.

6)Clean only with dry cloth.

7)Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.

8)Do not install near any heat sources such as radiators, heat registers, stoves or other apparatus (including amplifiers) that produce heat.

9)Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other.A grounding type plug has two blades and a third grounding prong.The wide blade or the third prong are provided for your safety.If the provided prong does not fit into your outlet,consult an electrician for replacement of the obsolete outlet.

10)Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11)Only use attachments/accessories specified by the manufacturer.

12)Use only with the cart,stand,tripod,bracket,or table specified by the manufacturer,or sold with the apparatus.When a cart is used,use caution when moving the cart/apparatus combination to avoid injury from tip-over

13)Unplug this apparatus during lightening storms or when unused for long periods of time.

14)Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged,liquid has been spilled or objects have fallen into the apparatus,the apparatus has been exposed to rain or moisture, does not operate normally or has been dropped.

15)Apparatus shall not be exposed to dripping or splashing and no object filled with liquids such as vases shall be placed on the apparatus.

Table of Contents

Types of Discs Your DVD player will play Supporting function of disc

Remote Controller

Systems connection (Stereo and 5.1)

Chapter 1 Basic Operation

1. Turn On the TV and your DVD player

2. Insert a disc

3. Play

Chapter 2 Additional Operation

1. Selecting Tracks (compatible with DVD, SVCD, VCD, CD, JPEG discs)

2. Skipping Tracks (compatible with DVD, SVCD, VCD, CD, JPEG discs)

3. Multispeed Fast Motion Playback (compatible with DVD, SVCD, VCD, CD, discs)

4. Multispeed Slow motion playback (compatible with DVD, SVCD, VCD discs)

5. Freeze Frame and Frame Advance (compatible with DVD, SVCD, VCD discs)

6. Using the Repeat Feature (compatible with DVD, SVCD, VCD, CD,

JPEG discs)

7. Using the Display Feature (compatible with DVD, SVCD, VCD, CD,

JPEG discs)

8. Using the Search Feature (compatible with DVD, SVCD, VCD, CD,

discs)

9 . Changing the Soundtrack (compatible with SVCD, VCD, CD

discs)

10. Changing the Audio Language (compatible with DVD, SVCD discs)

11. Subtitles (compatible with DVD, SVCD discs)

12. Changing the Camera Angle (compatible with DVD discs)

13. Changing the TV System (compatible with DVD, SVCD, VCD, CD,

JPEG discs)

14. Mute the Audio Output (compatible with DVD, SVCD, VCD, CD

discs)

15. Zoom In the Video Image (compatible with DVD, SVCD, VCD,

JPEG discs)

16. Repeat a Specific Segment on the Disc that You Define (compatible with

DVD, SVCD, VCD, CD discs)

17. Volume control (compatible with DVD, SVCD, VCD, CD

discs)

17. Reset function

Chapter 3 Playing MPEG 4/JPEG discs

Chapter 4 The Setup Menu System

Function of karaoke USB,SD/MS/MMC card`s play

Disc maintenance Specifications

2 3

4 5

5 5

9 9

11 11

13 23 23

24 24

Types of Discs Your DVD Player Will Play

Types of Discs

DVD

SVCD

VCD

JPEG

MPEG 4

Diameter

12cm

8cm

12cm

8cm

12cm

8cm

12cm

Playback Time

1 layer: 120min

2 layers: 240min

1 layer: 80min

2 layers: 180min

45min

74min

20min

74min 20min

600min

Data Format Remark

DVD Format Disc:

Compressed Digital Audio Compressed Digital Video Moving picture

MPEG2

Compressed Digital Audio Compressed Digital Video Moving picture

MPEG1

Compressed Digital Audio Compressed Digital Video Moving picture

CD-DA:

Digital Audio

Compressed Digital Audio

Audio digital compressed+ Video digital compressed

Include:

SVCD CVD

Note: DVD-R, CD-R, CD-RW discs can be played in this DVD player.

Supporting function of disc

DVD disc can support many functions, different makers, and different function support. Prevalent marks of a few functions as follows:

Include: VCD2.0 VCD1.1 VCD1.0 DVCD

PAL/NTSC zone code & TV system

DOLBY digital surround sound

Numbers of sound language

Numbers of subtitle language

R RESTRICTED

Parental lock

View angle

Close caption (Only NTSC)

Mpeg 4 files on discs

Remote Controller:

STANDBY SUBTITLE

AUDIO

ANGLE

N/P

A-B

MUTE

STEP

SLOW

REV

SETUP

(

MOVE

STOP

PLAY

PAUSE

16 17

21 22 23

31 32

)

GOTO

-B

STEP

RESET

TUR

/RE

TITL

084

DVD1

1 2

GOTO

OPEN/CLOSE

NUMBER KEYS

5 6

7 8

14 15

OSD

REPEAT

RESET

PBC

TITLE/RETURN

ENTER

ZOOM

VOL-

VOL+

PROG

systems connection (Stereo and 5.1)

1) Before connecting, make sure to turn off power of all apparatus.

2) After finishing connection, turn on the power again. AV cable (accessory) should be connected by color . Yellow plug-------- video terminal (yellow) White plug--------- left audio terminal (white) Red plug----------- right audio terminal (red) Must connect properly, especially the plug should be inserted to the bottom.

INPUT S-VIDEO

VIDEO

A B

COMPONENT

VIDEO INPUT

Cb/Pb

Cr/Pr

OPTICAL

COAXIAL

DIGITAL AUDIO INPUT

SUB

WOOFER

CENTER

R L

5.1 CHANNEL INPUT

SURROUND

FRONT

5.1 channel amplifier

Chapter 1 Basic Operation

1.Turn On the TV and Your DVD Player

Press the Power or Standby button on the player or the remote controller, and Read appears on the TV screen. If there is not a disc in the DVD player, No disc will be displayed on both the screen and the VFD.

2.Insert a Disc

Press the Open / Close button on the remote controller or the front of the DVD player, and Open appears on the screen. Then place a disc gently into the tray with the disc's label facing up (double-sided discs have content on both sides, so you can place either side up), and press the Open / Close button again to close the disc tray, Close appears and the player starts to read. Then the disc starts playing automatically. (Note: Of certain type discs,

after reading out the type, the Play or Enter button should be pressed to start playing.)

3. Play

The contents of each disc menu vary according to how the disc was authored and what features are included. The disc menu will be turned on for you to select, when Menu button pressed. Also play and pause can be switched with the Pause button on the remote.

a) Menu Play (compatible with DVD, SVCD, VCD2.0 discs)

I. Press Menu ,PBC button TV screen displays the DVD Root Menu when a DVD disc is loaded. When a SVCD or VCD 2.0 disc is loaded, SVCD or VCD 2.0 menu will be displayed on the screen. When PBC is off, At this moment, press PBC button once to display current PBC state. PBC is initialized on when a SVCD or VCD2.0 disc is loaded.

MENU is initialized on when a DVD disc is loaded.

II. When a DVD disc is loaded, you can press Arrow buttons to highlight the menu item you want to choose; As SVCD or VCD2.0, you can press Numeric buttons to select a track to play.

III. Press Enter button, you can begin play with the highlighted.

IV. Return when playing: When a DVD disc is playing, press Menu button, and you can return to Root Menu; As SVCD, VCD2.0, and PBC is on, press Tittle/Return button, you can return to the menu.

V. Stop

1) When you press Stop button for the first time, the player turns into quasi stop state. At the same time the OSD appears Quasi Stop . To begin the title over, press Stop button twice.

2) In quasi stop state, the player remembers where you stopped, when you start playing the disc again, the DVD player picked up where you left off.

3) In stop state, when you press Play button, the player enters sequence playback mode.

For the disc protection, before you press Open / Close button to eject the disc tray when playing, please press Stop button first. After taking out the disc, press Open / Close again to close the tray.

If you're not going to use the DVD player for a long time, be sure unplug.

b) Title Play (compatible with DVD discs only) I. During DVD playback, press Title/Return button to display the DVD title content.

II. Press the Arrow buttons to highlight the title you want to choose, and press Enter button; Also you can press Numeric buttons to choose.

III. The DVD player begins with chapter 1 of the chosen title. .

c) Sequence Play (compatible with DVD, SVCD, VCD discs)

I. When a SVCD or VCD disc is loaded and PBC is on, once PBC button is pressed, PBC

switches off. Then the player can play in sequence playback mode; when PBC button pressed twice, PBC switches on.

II. Except for SVCD or VCD discs, in the stop state, when press Play button, the player

then enters sequence. Playback mode. This feature is effective to all the compatible discs.

d) Program Play (compatible with DVD, SVCD, VCD, CD, JPEG discs)

The Program Playback option allows you to enter the order in which you want chapters or tracks to play, maximum to 16.

Program Menu:

DVD, JPEG discs:

SVCD, VCD, CD discs:

If PBC is on, this operation will turn PBC off while the chapters / tracks plays in programmed order.

According to the highlight, use the Numeric buttons to enter the chapters / tracks in the order you want them to play. Then press Play button or use Arrow buttons to highlight the PLAY item and press Enter button. The chapters / tracks will play in the programmed order. You can program maximum 16 titles / chapters / tracks.

According to the Direction Indicator on the menu, you can press Arrow buttons to highlight where you want to enter.

During Program Playback, if Program button pressed, the programmed order and the contents will be displayed on the screen, and the Program Playback will be stopped; Also you can press Stop and Play button to resume normal playback.

Notes: To clear the programmed order, use Arrow buttons to highlight the CLEAR item, then press Enter button. To modify the programmed order, use Arrow buttons to highlight the modifying item and enter the new chapter / track you want to program directly.

+ 18 hidden pages