PERIODICALLY CHECK THIS RECEIVER HITCH TO ENSURE ALL FASTENERS ARE TIGHT AND ALL STRUCTURAL COMPONENTS ARE SOUND
CURT Manufacturing LLC. warrants this product to be free of defects in material and/or workmanship at the time of retail purchase by the original purchaser. If the product is found to be defective, Curt Manufacturing LLC. may repair or replace
the product at their option, when the product is returned, prepaid, with proof of purchase. Alteration to, misuse of, or improper installation of this product voids the warranty. Curt Manufacturing LLC.'s liability is limited to repair or replacement
of products found to be defective, and specifically excludes liability for incidental or consequential loss or damage.
For more information log onto www.curtmfg.com, & for helpful towing tips log onto www.hitchinfo.com
MAKE: STYLE:
MIN.20
WARNING: NEVER EXCEED YOUR VEHICLE MANUFACTURER'S RECOMMENDED TOWING CAPACITY
WEIGHT CARRYING:
INSTALLATION TIPS: INSTALLATION TIME:
INSTALLATION REQUIRES:
VEHICLE PHOTO:
HITCH ILLUSTRATION:
REPRESENTATIVE PHOTO
MAKE SURE YOUR HITCH MATCHES
LEVEL OF DIFFICULTY:
MODERATE
EASY MODERATE CHALLENGING
THE I NSTALL TIME LISTED IS FOR PROFESSIONAL
INSTALLERS. IF YOU A RE HESITANT TO UND ERTAKE
THIS TASK ON YOUR OWN, CONTACT A N AUTH ORIZED
CURT INSTALL ER FOR ADDITIONAL ASSISTANC E.
1. BEFORE YOU BEGIN INSTALLATION, READ A LL
INS TRUCTIO NS THO ROUGHLY.
2. TO EASE IN STALLATION, 2 P EOPLE MAY BE
REQUIRED.
3. USING PROPER TOOLS WILL GREATL Y IMPR OVE
THE QUALIT Y OF TH E INSTA LL AND REDUCE THE
TIM E REQUI RED.
4. NEED HELP OR HAV E SOME QUESTIONS?
CALL TECHN ICAL SU PPORT A T 800.798.0813
Safety glasses should be
worn at all times while
installing this product
.
YEARS:
2012-PRESENT SCION MODEL:
iQ
COMPACT
1,000
150
TRAILER WEIGHT:
TONGUE WEIGHT:
11291 INSTALLATION INSTRUCTIONS
LBS.
LBS.
3/22/2013
WARNING:
WE RECOMMEND THE USE OF 18050 STABILIZING STRAPS FOR ALL NON-TRAILER
(WHEEL-LESS) LOADS. PLEASE SEE THE CURT CATALOG OR VISIT US ONLINE AT
WWW.CURTMFG.COM FOR FURTHER INFORMATION.
DIE GRINDER
RATCHET
SAFETY
GLASSES
SOCKET
9/16"
11/16"
SOCKET
EXTENSION
6"
TORQUE
WRENCH
- HOLE ENLARGEMENT
- FISHWIRE HARDWARE
HOLE ENLARGEMENT DIAGRAM
INSTALLATION WALKTHROUGH:
For more information log onto www.curtmfg.com, & for helpful towing tips log onto www.hitchinfo.com
Parts List
DESCRIPTIONPART NUMBERQTYITEM
HEX FLANGE NUT7/16-14
21
HEX BOLT3/8-16 X 1 1/242
WASHER3/8"43
CARRIAGE BOLT7/16-14 x 1 1/224
.250 x 1.00 x 2.00" SQUARE HOLE SPACERCM-SP725
7/16" FISHWIRE7_16 FISHWIRE
26
HEX FLANGE NUTHFN381647
EURO MOUNT OPTION AVAILABLE
#45571 (1-7/8") AND #45572 (2" BALL)
DESIGNED FOR USE WITH
BALLMOUNT # D-55001 / 45501
1
3
2
6
4
5
7
1. Enlarge existing hole to allow 7/16" carriage bolts and
SP7 spacers to pass through, both sides.
ENLARGED ACCESS HOLE
NOTE: ENLARGE EXISTING
HOLE TOWARDS OUTSIDE
OF FRAME RAIL.
EXISTING
HOLE
2. Reverse fishwire 7/16" carriage bolts and SP7 spacers
through enlarged access holes, both sides.
INSTALLATION WALKTHROUGH:
For more information log onto www.curtmfg.com, & for helpful towing tips log onto www.hitchinfo.com
3. Raise hitch into position and loosely secure to carriage
bolts using 7/16" hex flange nuts. Note: The side plates
will slide between the inside of the tow loops.
4. Align holes in side plates with holes in tow loops and
secure using 3/8" hex bolts, 3/8" washers and 3/8" hex
flange nuts, as shown.
5. Torque all 7/16" hardware to 70 ft-lbs.
Torque all 3/8" hardware to 45 ft-lbs.
11291
SCION iQ
3/22/2013
GROSS LOAD CAPACITY WHEN USED AS A WEIGHT CARRYING HITCH: LBS. TRAILER WEIGHT & LBS. TONGUE WEIGHT.
***DO NOT EXCEED VEHICLE MANUFA CTURER'S RECOMM ENDED TOWING CAP ACITY.***
WARNING: ALL NON-TRAILER LOADS APPLIED TO THIS PRODUCT MUST BE SUPPORTED BY 18050 STABILIZING STRAPS.
** FAILURE TO PRO PERLY SUPPORT N ON-TRAILER LOADS W ILL VOID PRODUC T WARRANTY**
HAVING INSTALLATION QUESTIONS? CALL TECHNICAL SUPPORT AT
Parts List
HEX FLANGE NUT7/16-1421
HEX BOLT3/8-16 X 1 1/242
4
3
25
26
WASHER3/8"
CARRIAGE BOLT7/16-14 x 1 1/224
.250 x 1.00 x 2.00" SQUARE HOLE SPACERCM-SP7
7/16" FISHWIRE7_16 FISHWIRE
HEX FLANGE NUTHFN381647
DESCRIPTIONPART NUMBERQTYITEM
1,000 150
1-800-798-0813
PASSENGER SIDE
FRAME RAIL
ENLARGED ACCESS HOLE
NOTE: ENLARGE EXISTING HOLE
TOWARDS OUTSIDE OF FRAME RAIL
EXISTING HOLE
HOLE ENLARGEMENT DIAGRAM
TOOLS REQUIRED
RATCHET
TORQUE WRENCH
6" EXTENSION
DIE GRINDER
9/16" SOCKET
11/16" SOCKET
SAFETY GLASSES
HITCH WEIGHT: LBS.
INSTALL TIME
PROFESSIONAL: MINUTES
NOVICE (DIY): MINUTES
INSTALL NOTES:
- HOLE ENLARGEMENT
- FISHWIRE HARDWARE
22
20
40
DRIVER SIDE
FRAME RAIL
2
ENLARGED
6
4
5
3
ENLARGED ACCESS HOLE
TOW LOOP
(BOTH SIDES)
7
1
DESIGNED FOR USE WITH
BALLMOUNT # D-55001 / 45501
EXISTING HOLES
(BOTH SIDES)
EURO MOUNT OPTION AVAILABLE
#45571 (1-7/8") AND #45572 (2" BALL)
ACCESS HOLE
INSTALLATION STEPS
1. Enlarge existing hole to allow 7/16" carriage bolts and SP7 spacers to pass through, both sides.
See Hole Enlargement Diagram.
2. Reverse fishwire 7/16" carriage bolts and SP7 spacers through enlarged access holes, both sides.
See Reverse Pull Fishwire Technique
3. Raise hitch into position and loosely secure to carriage bolts using 7/16" hex flange nuts.
Note: The side plates will slide between the inside of the tow loops.
4. Align holes in side plates with holes in tow loops and secure using 3/8" hex bolts, 3/8" washers
and 3/8" hex flange nuts, as shown.
5. Torque all 7/16" hardware to 70 ft-lbs.
Torque all 3/8" hardware to 45 ft-lbs.
PERIODICALLY CHECK THIS RECEIVER HITCH TO ENSURE THAT ALL FASTENERS
ARE TIGHT AND THAT ALL STRUCTURAL COMPONENTS ARE SOUND.
Curt Manufacturing LLC., warrants this product to be free of defects in material and/or workmanship at the time of retail purchase by the original purchaser. If the product is found to be defective,
Curt Manufacturing LLC., m ay repair or replace the product, at their option, when the product is returned, prepaid, with proof of purchase. Alterati on to, misuse of, or improper installation of
this product voids the warranty. Curt Manufacturing LLC. 's liability is limited to repair or replacement of products found to be defective, and specifically excludes liability for incidental or
consequential loss or damage.
Loading...