3
3. USE OF THE APPLIANCE
A. ASSEMBLY
INSTALLING THE BATTERIES
The scale operates on two AA batteries. Never use defective or
leaking batteries as these can damage the appliance. To install
the batteries, remove the battery compartment cover by gently
pushing the rectangular notch towards the cover. Install the batteries, making sure that the positive (+) and negative (-) terminals on the batteries correspond to the positive (+) and
negative (-) terminals inside the compartment. Replace the cover
by pushing the two notches intended for this and gently press
until you hear a click indicating it has been locked in place.
“Lo” will appear on the digital display when the batteries are
low and should be replaced.
IMPORTANT! Use ALKALINE batteries only.
B. OPERATING THE APPLIANCE
MEASURING
Place the scale on a level and even surface. If you use the
handy bowl or other container for weighing the ingredients,
place it on the platform before turning the scale on. This will
prevent the need to press the on/tare/off button to reset the
scale to zero.
Press the on/tare/off button. “
88:8.8 ” will be displayed
automatically. After a few seconds, “0” will appear on the
digital screen. Now place the food you want to weigh into the
bowl or other container, or directly onto the platform. The
weight will be displayed on the digital screen.
To change the unit of measure, i.e. to change from measuring
in grams to measuring in ounces/lbs, you need only press the
g/oz button.
The scale has a capacity of 1 g (
1
/
8
oz) to 5 kg (11 lb).
NOTE: the maximum capacity of the scale is reduced
depending on the weight of the bowl or container you use.
The food is weighed to the nearest gram.
THE TARE FEATURE
This feature lets you weigh the ingredients separately as they
are added to the mixture in the bowl or other container. By
following these instructions, you use the amounts of each
ingredient specified in the recipe.
1. Turn the scale on as described above.
2. When “0” is displayed on the digital screen, place the
empty container into which the ingredients are to be
measured on the platform.
3. Press the on/tare/off button. Wait until the “0” appears on
the digital screen. The aim of this feature is to substract the
weight of the empty container from the total weight of the
bowl and the ingredients.
4. Measure the first ingredient. The desired weight or amount
will be displayed.
5. Press the on/tare/off button so that the weight of the first
ingredient is substracted. Wait until the “0” appears on the
digital screen.
6. Weigh the next ingredient. Its weight will appear on the digital screen.
You can repeat the process for several ingredients.
NOTE: If the total weight of the preparation exceeds 5 kg
(11 lb) or (i.e., its maximum capacity), “E---” will be displayed
on the screen.
To turn the machine off, press the on/tare/off button for a few
seconds. If the appliance is left on, it will turn off automatically
after 120 seconds of non-use to save battery power.
8
8