Cuisinart MG-50 Instruction Manual
Meat Grinder Attachment
INSTRUCTION AND
RECIPE BOOKLET
MG-50
For your safety and continued enjoyment of this product, always read the Instruction Book carefully before using.
2
IMPORTANT
SAFEGUARDS
When using electrical appliances,
basic safety precautions should
always be taken, including the
following:
1. READ ALL INSTRUCTIONS
BEFORE USING.
2. Switch off and unplug your
Cuisinart
®
Stand Mixer before
tting or removing the Meat
Grinder Attachment, after use
and before cleaning.
3. Close supervision is necessary
when any appliance is used by
or near children or individuals
with certain disabilities.
Cuisinart does not recommend
the use of this appliance by
children or individuals with
certain disabilities.
4. NEVER FEED FOOD BY HAND;
ALWAYS USE THE PUSHER.
Avoid contact with moving
parts and tted attachments.
To reduce the chances of bodily
injury and/or damage to the
stand mixer or Meat Grinder
Attachment, keep hands,
clothing, cooking utensils, etc.,
away from the moving parts
during operation.
5. Do not use ngers to scrape
food away from grinding plate
while appliance is operating.
Injury may result.
6. The use of attachments not
recommended or sold by
Cuisinart may cause re,
electric shock or injury.
7. Do not use more than one
attachment at a time.
8. Do not use the stand mixer or
attachment if it is damaged
or if the cord is damaged. Have
it checked and serviced before
resuming use.
9. Do not use this attachment
for anything other than its
intended use.
10. Do not use outdoors.
11. Warning: The cutter is sharp;
handle with care both when
using and when cleaning.
12. To protect against the risk of
electric shock, do not put the
base power unit in water or
other liquids.
13. Do not let cord hang over
edge of table or counter.
14. Never leave your Meat Grinder
Attachment unattended while
the stand mixer is running.
15. The attachments are intended
for use with the basic appliance
SM-50.
16. Do not operate your
appliance in an appliance
garage or under a wall
cabinet. When storing in an
appliance garage always
unplug the unit from the
electrical outlet. Not doing
so could create a risk of re,
especially if the appliance
touches the walls of the
garage or the door touches
the unit as it closes.
SAVE THESE
INSTRUCTIONS
FOR HOUSEHOLD
USE ONLY
Refer to stand mixer manual for
stand mixer operating instructions.
3
IMPORTANT: Always unplug the
Cuisinart® Stand Mixer from outlet
when assembling and disassembling.
CONTENTS
Important Safeguards .................... 2
Unpacking Instructions.................. 3
Parts and Features ........................4
Assembling Meat Grinder
Attachment .................................... 5
Sausage Maker ............................. 5
Cleaning and Maintenance ............ 7
Tips and Hints ............................... 7
Recipes ......................................... 8
Warranty ....................................... 11
UNPACKING
INSTRUCTIONS
1. Place the gift box containing your
Cuisinart® Meat Grinder Stand
Mixer Attachment on a at sturdy
surface before unpacking.
2. Remove the instruction booklet
and tray.
3. Remove the grinding plates,
sausage-making ring, cutter, ring
nut and both sausage nozzles.
Be careful when removing the
grinding plates.
4. Lift the corrugated insert that
contains the grinder body out
of the gift box and remove the
grinder body. Remove the pusher/
wrench.
5. Unscrew the ring nut and remove
the protective cardboard insert
from in front of the cutter. Use
caution; the blades are sharp.
To assemble the meat grinder
attachment, follow Assembly
Instructions on page 5. Replace all
packaging materials inside box and
save the box for repackaging.
WARNING: RISK OF FIRE OR ELECTRIC SHOCK
The lightning flash with arrowhead symbol within an equilateral triangle
is intended to alert the user to the presence of uninsulated, dangerous
voltage within the product’s enclosure that may be of sufficient
magnitude to constitute a risk of fire or electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert
the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the appliance.
4
PARTS AND FEATURES
1. Grinder Body
2. Feed Screw Pin
3. Cutter
4. Ring Nut
5. Wrench
6. Tray
7. Pusher with Storage
8. Pusher Lid
9. Sausage-Making Ring
10. Large Sausage Nozzle
for thicker sausages
11. Small Sausage Nozzle
for thinner sausages
12. Two Grinding Plates
a. Medium, use for grinding
raw meat, cooked meats
for spreads and bread
-
crumbs
b. Coarse, use for grinding
raw or cooked meats, firm
vegetables, dried fruits
and cheese
1
2
3
4
5
7
8
6
11
10
9
12b
12a
5
Assembling Meat
Grinder Attachment
Assemble the meat grinder attachment prior to attaching to
the stand mixer.
1. Insert the feed screw pin into
the open end of the attachment.
2. Place the cutter with the at
side facing out toward you
over the feed screw pin (this is
an important step or the meat
grinder will not work).
3. Place the grinding plate over
the cutter on the feed screw
pin.
4. Screw on the ring nut by
turning it clockwise and hand
tighten.
When you are nished meat
grinding, and if the ring nut is too
tight to remove, use the wrench
to loosen.
Attaching to stand
mixer
1. Make sure stand
mixer is OFF.
2. Gently pull port
cover off front
of mixer head to
remove.
3. Turn the stand
mixer attachment
knob counterclockwise until
outlet opening is
unobstructed.
4. Insert the square
metal end of the
assembled attachment into
the opening. If necessary,
turn it to the right slightly so
the small round knob on the
attachment is below the notch
on right side of opening, and
turn it back and forth slightly
until the knob slips into the
notch and attachment locks
into place.
5. Turn the stand
mixer attachment
knob clockwise to
secure grinder to
mixer.
6. Fit the tray onto
the top of the
meat grinder and
put a mixing bowl
under the grinder
to catch food.
MEAT GRINDER
Loading...