Cuisinart Hurricane CPB-380C Instruction And Recipe Booklet
INSTRUCTION AND
RECIPE BOOKLET
Hurricane™ Compact Blender
CPB-380C
For your safety and continued enjoyment of this product, always read the instruction book carefully before using.
®
2
IMPORTANT SAFEGUARDS
When using an electrical appliance, basic safety precautions should always be taken,
including the following:
1. READ ALL INSTRUCTIONS BEFORE USING.
2. Unplug from outlet when not in use, before putting on or taking off parts,
and before cleaning or removing contents from blender jar or cup. Never
put hands into the blender jar or cups, or handle the blades with
appliance plugged in.
3. To protect against the risk of electrical shock, do not put motor base of blender
in water or other liquids.
4. This appliance should not be used by or near children or individuals with certain
disabilities. Close supervision is necessary when any appliance is used by or
near children.
5. Avoid contact with moving parts.
6. Do not operate any appliance with a damaged cord or plug or after the appliance
malfunctions, or is dropped or damaged in any manner. Return appliance to
nearest Cuisinart service facility for examination, repair, and/or mechanical or
electrical adjustment.
7. The use of attachments, including canning or ordinary jars, not recommended or
sold by Cuisinart, may cause fire, electric shock, or risk of injury to persons.
8. Do not use outdoors.
9. Do not let cord hang over edge of counter or table or touch hot surfaces.
10. Keep hands and utensils out of jar while blending to reduce the risk of
severe injury to persons or damage to blender itself. A rubber or plastic
spatula may be used, but must be used only when the blender is turned off.
11. Do not touch cutting assembly, interfere with blade movement, or remove
blender jar cover.
12. BLADES ARE SHARP. HANDLE CAREFULLY.
13. To reduce the risk of injury, never place cutting assembly on base unless the
blender jar, chopper cup or travel cups are properly attached.
14. Always operate blender jar with the cover in place.
15. Never leave your blender unattended while running.
16. Twist vessel on firmly. Injury can result if moving blades accidentally become
exposed.
17. Do not use an extension cord with this unit. Doing so may result in fire, electric
shock, or personal injury.
18. Wash the blender jar, chopping cup, travel cups, cutting assemblies and lids/
cover before first use.
19. Do not blend hot liquids in the travel cups or chopping cup.
20. CAUTION! NEVER USE carbonated beverages in the blending jar,
chopping cup, or travel cups.
21. Be certain cover is securely locked in place before operating appliance.
22. Do not attempt to bypass the interlock system that powers the unit on.
23. WARNING: TO REDUCE THE RISK OF ELECTRICAL SHOCK OR FIRE, DO
NOT REMOVE THE BASE PANEL. NO USER-SERVICEABLE PARTS ARE
INSIDE. REPAIR SHOULD BE DONE ONLY BY AUTHORIZED PERSONNEL.
24. Do not operate your appliance in an appliance garage or under a wall cabinet.
When storing in an appliance garage, always unplug the unit from the
electrical outlet. Not doing so could create a risk of fire, especially if the
appliance touches the walls of the garage or the door touches the unit as it
closes.
25. When blending hot liquids, remove center piece of two-piece cover.
26. When processing baby food, the appliance is intended for processing small
quantities of food for immediate consumption, and is especially recommended.
It is not intended to prepare large quantities of food at one time.
SAVE THESE INSTRUCTIONS
FOR HOUSEHOLD USE ONLY
NOTICE
This appliance has a polarized plug (one prong is wider than the other).
To reduce the risk of electric shock, this plug will fit into a polarized outlet only one
way. If the plug does not fit fully into the outlet, reverse the plug.
If it still does not fit, contact a qualified electrician. Do not modify the plug in any way.
Rating of unit is 500 watts max. Recommended attachments and recipes may draw
significantly less power.
This appliance comes with a thermal resettable protection device to prevent damage
to the motor in the case of extreme overload. Should the unit shut off unexpectedly,
unplug it and let it cool for at least 15 minutes before continuing (see Operating and
Safety Tips, on page 5).
3
UNPACKING INSTRUCTIONS
1. Place the gift box containing your Cuisinart® Hurricane™ Compact Blender on a
flat, sturdy surface before unpacking.
2. Remove instruction booklet and other printed materials from top of box. Next,
remove top pulp tray.
3. Carefully lift blender base from box and set aside.
4. Remove blender jar, chopping cup, travel cups, and straws and set aside. Before
using for the first time: Wash all parts according to the Cleaning and Maintenance
section on page 6 of this booklet to remove any dust or residue.
To assemble the blender, follow the Assembly instructions on page 4 of this
instruction booklet. Replace all packaging materials in the box and save the box for
repackaging.
TABLE OF CONTENTS
Important Safeguards ..........................................2
Unpacking Instructions .........................................3
Features and Benefits ..........................................3
Quick Reference Guide/Assembly ................................4
Blender Jar Operation ..........................................4
Travel Cup Operation ...........................................5
Chopping Cup Operation........................................5
Operating and Safety Tips .......................................5
Cleaning and Maintenance ......................................6
Troubleshooting ...............................................6
Food and Drink Quick Reference Guide ............................7
Tips and Hints ................................................8
Recipes......................................................9
Warranty ...................................................18
FEATURES AND BENEFITS
1. 32-oz. (1L), BPA-free, easy-grip blending jar
with cover and pour lid has a unique, sturdy design for all your blending needs.
Cover fits on top with a 1-oz. measured pour lid.
2. 8-oz. (250 ml), BPA-free chopping cup
with lid handles a variety of food preparation tasks including chopping, grinding
and whipping.
3. Two 16-oz. (500 ml), BPA-free travel cups with no-spill lids with a straw
allow you to blend and go. Make your favorite drinks: smoothies, protein
shakes, health and diet drinks and more!
4. Two high-quality blade assemblies
are strong enough for all blending, chopping and grinding tasks. They are
self-aligning so that the cups easily fit on the base. Blade assemblies are
interchangeable for desired tasks.
5. Heavy-duty motor base
is sturdy and stable, housing a compact 500 watt motor with a safety interlock
feature.
6. 3-function rotary dial
is easy to use: Low, High, and Pulse.
7. Slip-proof feet (not shown)
prevent movement during use and prevent damaging marks on countertops or
tables.
3.
4.
5.
1.
6.
2.
NOTE: Blades are SHARP. Handle carefully.
4
ASSEMBLY
After washing all parts, please see below for assembly. Place base on flat
surface and plug in.
BLENDER JAR OPERATION
1. With the base unit on the tabletop and unit plugged in, place the blender jar
assembled with the blade assembly onto the base and secure into place.
NOTE: Blade assemblies are interchangeable based on recipes and desired end
results.
2. Add food ingredients, beginning with liquid and soft items and finishing with harder
items like ice and frozen fruit. Replace the cover. You may add more ingredients by
lifting the measured pour lid and dropping ingredients through the fill area. Replace
the pour lid after adding ingredients.
Do not put hands into blender jar while device is plugged in.
NOTE: To remove blender jar cover, lift edge of cover upward. Do not use
measured pour lid to remove cover.
3. For continuous blending, turn dial to the desired speed. It is possible to switch
between High and Low speeds by simply turning the rotary dial.
4. To pause the blending process, turn the rotary dial to the OFF position.
The blending process will stop. To restart blending, rotate dial to desired speed.
5. To pulse, turn the dial to Pulse. Hold, then release after desired run time. Repeat
as needed. The Pulse function can be used to break apart larger pieces of food.
The Pulse function is also effective for starting the blending process when you do
not want continuous power, or for processing items that do not require an
extended amount of blending. Dial will automatically return to the OFF position
upon release.
6. When you have finished blending, turn the dial to OFF. Then remove the blender
jar from the base. Pour out ingredients. NEVER TOUCH THE BLADE ITSELF.
Unplug the unit.
QUICK REFERENCE GUIDE
To activate blender Place vessel tted with blade
assembly onto base
To begin blending Turn dial to desired speed
To change speeds Turn dial to desired speed
To pulse Turn dial left to Pulse
To stop blending Turn dial to OFF
Blender Jar
Assembly
Travel Cup
Assembly
Chopping
Cup Assembly
1. Turn blender jar
upside down.
2. Place blade assembly
on the round opening
of the jar and turn
counterclockwise
until tightened.
3. Stand jar upright.
Place on blender
base and secure into
place.
4. Add ingredients to be
blended, place cover
with pour lid in place
on blender jar.
1. Place cup on at
surface upright. Add
ingredients.
2. Attach blade
assembly on round
opening of the cup
and turn counterclockwise until
tightened.
3. Place on blender
base.
4. Turn clockwise to
lock.
1. Place cup on at
surface upright. Add
ingredients.
2. Attach blade
assembly on round
opening of the cup
and turn counterclockwise until
tightened.
3. Place on blender
base.
4. Turn clockwise to
lock.
5
TRAVEL CUP OPERATION
1. Put food ingredients into the travel cup, beginning with harder items like ice and
frozen fruit, and finishing with soft items and liquid. Attach blade assembly and turn
to secure.
NOTE: Blade assemblies are interchangeable based on recipes and desired end
results.
2. With the base unit on the tabletop and the unit plugged in, turn cup upside down,
place the assembled travel cup onto the base. Turn clockwise to lock into place.
3. For continuous blending, turn dial to the desired speed. It is possible to switch
between High and Low speeds by simply turning the dial.
4. To pause the blending process, turn the dial to OFF. The blending process will stop.
To re-engage the unit, choose the desired speed.
5. When you have finished blending, turn dial to OFF. Remove the travel cup from the
base. Unplug the unit.
6. Turn cup right side up, turn blade assembly clockwise to remove. Attach travel cup
lid by twisting counterclockwise.
CHOPPING CUP OPERATION
1. Put food ingredients into chopper cup, then attach blade assembly and turn
counterclockwise to secure.
NOTE: Blade assemblies are interchangeable based on recipes and desired end
results.
2. With the base unit on the tabletop and the unit plugged in, turn the cup upside
down, place the assembled chopper cup onto the base. Turn clockwise to lock into
place.
3. To continuously chop, turn dial to High or Low speed.
4. To pulse, turn dial to Pulse, holding for desired time; 1 to 2 seconds is
recommended per pulse. Repeat as needed.
5. When you have finished chopping, turn the dial to OFF. Remove the chopping cup
from the base. Carefully remove food with a spatula. NEVER TOUCH THE BLADE
ITSELF. Unplug the unit.
OPERATING AND SAFETY TIPS
• Make sure the electrical outlet is rated at the same voltage as that stated on the
bottom of the blender motor base.
• Always use the blender on a clean, sturdy, and dry surface.
• Always operate the blender jar with the cover on. Place cover on firmly. Keep the
blender jar cover on the blender jar while blending.
• Don’t put hands inside the blender jar when blender is plugged in.
• Don’t remove blender jar or cups while unit is running.
• Don’t place blade assembly onto motor base without the jar or cup attached.
• Make sure blade assembly is tightly attached to jar or cups.
• Always remove blade assembly before cleaning.
• Don’t twist blade assembly from blender jar or cups when removing from
motor base. Simply lift jar or cups from motor base.
• Use a plastic spatula as needed, only when the blender is not plugged in. Do not
use any utensil inside the blender while motor is on.
• Never use metal utensils, as damage may occur to the jar, cup or cutting assembly.
• Don’t store food or liquids in your blender jar.
• Don’t overload blender jar or cups. If the motor stalls, turn the blender off
immediately, unplug the unit and let it cool for at least 15 minutes. Then, remove a
portion of the food and continue.
• CAUTION: NEVER use carbonated beverages in the blending jar, chopping cup, and
travel cups.
• Don’t blend hot liquids in chopper and travel cups.
• Don’t use any container or accessories not recommended by Cuisinart. Doing so
may result in injury.
• To remove jar, lift straight up. Do not twist to remove.
• To remove travel and chopping cup, turn slightly counterclockwise before lifting.
• The blender jar, chopping cup, and travel cups are not recommended for
microwave use.
6
CLEANING AND MAINTENANCE
Always unplug your Cuisinart® Hurricane™ Compact Blender from the
electrical outlet before cleaning. The base and parts are made of corrosionresistant materials that are easy to clean. Before first use and after every
use, clean each part thoroughly. Periodically check all parts before
reassembly. DO NOT USE if any part is damaged, or if the jar or cups are
chipped or cracked.
To remove blade assemblies, twist off by turning clockwise.
NEVER TOUCH THE BLADE ITSELF.
CAUTION: Handle the blade assemblies carefully. They are SHARP and
may cause injury. DO NOT attempt to remove blades from cutting assembly.
Wash all parts in warm, soapy water; rinse and dry thoroughly. All parts are
top rack dishwasher safe.
Tip: You may wish to clean your blending and chopper cutting assemblies
as follows: Squirt a small amount of dishwashing liquid into blender jar or
cups and fill halfway with warm (not hot) water. Attach blade assembly. Run
on Low for 15 seconds. Repeat, using clean tap water. Carefully
disassemble parts and empty blender jar or cups. Rinse and dry all parts
thoroughly.
Finally, wipe the motor base clean with a damp cloth to remove any residue,
and dry thoroughly. Never submerge the motor base in water or other
liquids, or place in a dishwasher.
Any other servicing should be performed by an authorized service
representative.
Problem: Solution:
My blender is not turning
on.
Be sure the blade assembly is on the jar or cup correctly.
Be sure it is pushed all the way onto the base (travel and
chopping cups lock into place).
1. Plug blender into an independent outlet.
2. Make sure blender is securely plugged in.
3. Check the outlet for power; try plugging into a different
outlet.
4. Check your home's circuit breaker.
The blender stopped
running.
The motor could have overheated. The resettable fuse,
which protects the motor due to overloading, may have
been tripped. When this happens, to reset the appliance
unplug the unit and let it cool for a minimum of 15 minutes.
Then, reduce the contents of the blender jar and/or clear
any jams. Restart the unit as noted in the operating
directions.
The rubber gasket won’t
come out from the blade
assembly for cleaning.
Run under water and tap on the edge of sink upside down
to loosen the gasket.
Avoid hitting the blades which could cause damage.
The blade assembly is
hard to remove after
blending.
The ingredients cause pressure, and with the airtight seal,
pressure builds up creating a vacuum or a suction effect.
This is normal.
Unit appears to be
leaking.
1. Check rubber gasket. Make sure it's ush with blender
assembly.
2. Make sure rubber gasket is properly in place.
3. Make sure rubber gasket is not damaged.
4. Make sure jar blade assembly is tight.
TROUBLESHOOTING
Loading...