Cuisinart Handy Prep DFP-3 Instruction/recipe Booklet

For your safety and continued enjoyment of this product, always read the instruction book carefully before using.
INSTRUCTION AND RECIPE BOOKLET
Handy Prep™3-Cup Food Processor
DFP-3
DFP-3 Capacities:
The following can be prepared in a single batch using the 3-cup work bowl. Using the chute attachment for slicing and shredding will allow you to do unlimited amounts.
Food Amount
Sliced or Shredded Cheeses, Fruits or Vegetables 3 cups using work bowl,
unlimited using chute attachment
Chopped Fruits and Vegetables For best chopping results,
chop 1 cup at a time
Puréed Fruits and Vegetables, Cooked Legumes 3 cups thick purée
Chopped Raw or Cooked Meats, Poultry up to 1/2 pound at a time or Seafood
Thin Liquid 1-1/2 cups
Thick Liquid 2 cups
Bread/Pizza Dough (may use up to 1-1/2 cups flour in recipe to yield 3/4 cup whole grain flour in recipe) a scant 1 pound of dough
Cake Batter 3/4 pound to yield one 8-inch layer
or 6 cupcakes
Cookie Dough about 1 pound (12 – 24 cookies)
Cream for Whipping 1 cup to yield 1-1/4 cups
whipped cream
Nuts for Nut Butters 1-1/2 cups to yield
approximately 3/4 cup
1
2
IMPORTANT UNPACKING INSTRUCTIONS
This package contains a Cuisinart
®
3-Cup Food Processor and the following standard parts: a clear work bowl, chute attach­ment, cover with feed tube, white pusher, metal chop­ping blade, slicing disc and shredding disc, ejector disc, adapter stem for discs, and spatula.
CAUTION: CUTTING TOOLS HAVE VERY SHARP EDGES. READ THESE INSTRUCTIONS COMPLETELY BEFORE BEGINNING TO UNPACK.
To avoid injury to yourself or damage to the 3-Cup Food Processor when unpacking:
1. Place box right side up on floor or low table.
2. Remove instruction booklet and other printed material.
3. Open unit carton and remove the instruction booklet and other print­ed material. You will see an inserted corru­gated box containing the following parts:
* Adapter stem for discs,
a slim white cylinder placed on the inside of the work bowl cover. Remove this stem and place on workspace.
* Packed upside down you
will find the clear work bowl cover and white pusher. Hold cover by its rim and lift it straight up. Unwrap from polybag and remove white pusher. Remove cardboard insert.
4. Remove corrugated box from giftbox and place on table or other work­space. Carefully open:
HANDLE DISCS WITH GREAT CAUTION. THEIR CUTTING BLADES ARE RAZOR SHARP.
5. The white chute bowl with the slicing and shredding discs remains inside the inserted box. Lift the cardboard insert off of the white chute bowl. Grasp the slicing disc by the center hub and carefully place on work surface. Lift off the next cardboard insert and place white chute bowl onto work surface to remove the shredding disc. Remove the last cardboard insert and polybag from white chute bowl. Remove the spatula from the inserted box.
6. The white motor base, clear work bowl, blade assembly and ejector disc remain in the box. Remove white ejector disc from top of work bowl.
7. The motor base and work bowl assembly are packed in a foam block. Remove the base assembly complete with this foam block. Place on table or workspace.
8. Gently pull base/work bowl assembly out of foam block.
9. Carefully remove card­board insert from inside work bowl.
10. Unwrap base/ work
bowl/blade assembly from polybag. BE
SURE TO REMOVE METAL CHOPPING BLADE FIRST BEFORE REMOVING
WORK BOWL FROM MOTOR BASE.
11. Carefully grasp top of white center section of blade and lift it straight up. DO NOT TOUCH
METAL BLADES WHICH ARE RAZOR SHARP. Immediately
place metal chopping blade in safe place on counter or table, well away from edge. Now remove cardboard rim from around center stem of work bowl.
12. READ INSTRUCTION
BOOK CAREFULLY BEFORE ASSEM­BLING OR USING 3-CUP FOOD PROCESSOR.
13. Save shipping carton
and foam blocks. You may want to use them later to ship processor.
NOTE: Remember to return your completed product registration card with all information carefully filled out.
WHEN REMOVING BLADE:
CAREFULLY REMOVE THE METAL BLADE BY GRASP­ING THE CENTER HUB AND LIFTING IT STRAIGHT UP. NEVER TOUCH THE BLADES, AS THEY ARE RAZOR SHARP.
NOTICE
This appliance has a polarized plug (one blade is wider than the other). As a safety feature, this plug will fit only one way in a polarized outlet. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to defeat this safety feature.
3
Carefully read all instructions before using this appliance.
IMPORTANT SAFEGUARDS
To reduce risk of injury, always follow these safety precautions when using this appliance.
Getting Ready
1. Read all instructions.
2. Blades are sharp. Handle them carefully.
3. Always unplug from outlet when not in use, before putting on or taking off parts, and before cleaning. To unplug, grasp plug and pull from electrical out­let. Never pull cord.
4. Do not use outdoors.
5. Do not let cord hang over edge of table or counter, or touch hot surfaces.
6. Do not operate any appliance with dam­aged cord or plug, or after appliance has been dropped or damaged in any way. Return appliance to nearest authorized facility for examination repair for electrical or mechanical adjustment.
SAVE THESE INSTRUCTIONS
FOR HOUSEHOLD USE ONLY
Operation
1. Keep hands as well as spatulas and other utensils away from moving blades or discs while processing food, to prevent possibility of severe personal injury or damage to food processor. A plastic spatula may be used, but only when motor is stopped.
2. Avoid contact with moving parts. Never push food down by hand when slicing or shredding. Always use pusher, or injury may occur.
3. Make sure motor has
completely stopped before removing cover. (If machine does not stop within 2 seconds, when you turn cover, call 1-800­726-0190 for assis­tance). Do not use machine.
4. Never store any blade or disc on motor shaft. To reduce the risk of injury, no blade or disc should be placed on motor shaft except when the bowl is prop­erly locked in place and the food processor is in use. Store blades and discs as you would sharp knives, out of reach of children.
5. Be sure cover is securely locked in place before operating food processor.
6. Do not try to override or tamper with cover interlock mechanism. Injury may result.
Cleaning
To protect against electrical shock, do not put base in water or other liquid. If base falls in water, unplug immediate­ly. DO NOT REACH INTO WATER.
General
1. Close supervision is necessary when any appliance is used by or near children. Do not allow children to use this appliance.
2. Do not operate this, or any other, motor-driven appliance while under the influence of alcohol or other substances that affect your reaction time or perception.
3. This food processor is UL listed for household use. Use it only for food preparation as described in this book.
4. The use of attach­ments not recommend­ed or sold by Cuisinart may cause fire, electri­cal shock or personal injury, or damage to your food processor.
5. Maximum rating of 5 Amperes is based on attachment that draws greatest current. Other recommended attach­ments may draw signif­icantly less current.
TABLE OF CONTENTS
Important Safeguards. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 3
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 4
The Machine Includes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 5
Assembly Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 6
The Machine Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 6
Operating Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 6
Chopping, Puréeing, Mixing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 6
Adding Food While Processing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 7
Removing Processed Food . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 7
Slicing and Shredding Less Than 3 Cups of Food. . . . . . . . . . . . . . . . . . . . . . . Page 8
Slicing and Shredding More Than 3 Cups of Food . . . . . . . . . . . . . . . . . . . . . . Page 8
Food Prep Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 9
Guidelines for Perfect Slices and Uniform Shreds . . . . . . . . . . . . . . . . . . . . . . Page 11
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 12
Cleaning And Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 12
For Your Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 13
Technical Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 13
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 14
Recipes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 15
INTRODUCTION
Congratulations on your purchase of the Cuisinart®Handy Prep™Food Processor. This product is the ultimate food preparation tool, and it comes from the originator of the American food processor, Cuisinart.
The Handy Prep
handles a variety of food prep tasks. Chop, mix, slice and shred ingredients with the chopping/mixing blade and slicing and shredding discs, or knead batches of your favorite bread and pizza dough. Cuisinart has also included a bonus Feed Chute Attachment so you can slice or shred unlimited amounts of ingredients. The Handy Prep
is easy to use, easy to clean and easy to store.
4
5
THE MACHINE INCLUDES
1. Motor Base with motor shaft and 3-position control switch
2. 3-cup Work Bowl made of durable shatter-resistant Lexan
®
plastic.
3. Work Bowl Cover with feed tube.
4. Pusher that slides inside the feed tube.
5. Continuous Feed Chute for slicing and shredding unlimited amounts of ingredients.
6. Stainless Steel
Chopping/Mixing Blade
7. Medium Shredding Disc
8. 2mm Slicing Disc
9. Ejector Disc directs sliced or shredded ingredients through feed chute attachment.
10. Adapter Stem
11. Spatula
Pusher
3-Cup Work Bowl
Cover with Feed Tube
Housing Base
Spatula
Chopping/Mixing Blade
2mm Slicing Disc
Ejector Disc
Medium Shredding Disc
Continuous Feed Chute
Adapter Stem
6
ASSEMBLY INSTRUCTIONS
Read all instructions on these two pages before you start. Check that your household voltage matches that shown on label on bot­tom of food processor base.
Note: Before using the Handy Prep
for the first time, wash all parts except base in hot, soapy water. Rinse and dry thoroughly. Handle metal blade and slicing disc or shredding disc with great care. Their blades are razor-sharp. Do not leave them in soapy water, where they may disappear from sight. Never immerse base in water or any liquid.
1. Put base on counter or table near electrical outlet. Do not plug in until food processor is totally assembled.
2. Pick up empty clear work bowl, holding it in both hands, with handle toward you.
Put bowl on base, fitting center tube over shaft on base and placing handle slightly to left of front center (7 o’clock.)
Hold bowl by handle and turn bowl counter­clockwise as far as it will go. It will click into locked position.
3. Pick up metal blade by center plastic part.
Never touch metal cutting blades, which are razor sharp.
Place blade over motor shaft, twisting it gently clockwise until it drops
into place over shaft. Push top of center plastic part to push blade down as far as it will go. Lower blade should almost touch bottom of bowl.
4. Put cover on bowl, with feed tube at back, slightly to right of center.
5. With hand on feed tube, turn cover coun­terclockwise to lock it into place. It will click into position easily. Do not force it.
Motor will not start unless work bowl is securely locked in position and cover is securely locked on work bowl.
6. Hold pusher with more rounded side toward you and insert it in feed tube. Always use
pusher to guide food through feed tube. Never use your fingers or spatula.
Plug your Cuisinart
®
Handy Prep™into a household electrical outlet.
To remove cover, unlock it by turning it clockwise, then lift it straight up.
THE MACHINE FUNCTIONS
Control switch on base of machine has 3 positions, giving you fingertip control of operation.
ON (Continuous)
For continuous operation, move control switch up to
ON position. Motor will start, if you have followed assembly instructions.
OFF
To turn motor off, move control switch down to OFF position in center.
PULSE
For on-off operation, called pulse-chopping or pulsing, press control switch down to PULSE position, then release it.
Motor runs as long as you hold control switch down. Motor stops when you release control switch. Try it a few times.
You control duration and frequency of pulses by length of time you hold control switch down and rate at which you press it. Allow enough time between pulses to let food in work bowl fall to bottom.
Always use switch for pulse/chopping. Never turn cover back and forth to start and stop processor.
OPERATING INSTRUCTIONS
You may want to practice before actually using the Handy Prep™ to prepare food for a meal. Try soft fruit or vegetables like an apple or zucchini.
Chopping, Puréeing, Mixing
1. Remove cover and put some food into work bowl. First, cut food into 3/4-inch (2cm) pieces. You will get a more even chop if you start with pieces that are all the same size.
7
Put pieces into work bowl with metal blade in place. You can put in up to 1 cup of food at a time. If you want to process more, do it in batches.
2. Put on cover and lock it. Insert pusher. Press con­trol switch down to PULSE position, then release it. Repeat two or three times. Each time blade stops, let food pieces drop to bottom of bowl before pulsing again. This ensures that the blade will chop them at every pulse.
Watch what happens to food. With pulse/chop­ping technique, you can get an even chop without danger of overprocess­ing. Check texture by looking through work bowl. Be careful not to overprocess.
For a coarse chop, pulse only a few times.
3. If you want a finer chop or purée, move control switch up to ON and let machine run continuous­ly until food is chopped as fine as you want it. Check frequently through clear cover or bowl to avoid chopping too fine. Use spatula to scrape down any pieces that stick to inside of bowl.
Onions and other food with a high water content turn into a smooth purée very quickly. Do not over­chop — look at food frequently through work bowl.
To purée, follow same procedure as for chop­ping, but let machine run
until food is a smooth purée.
New users are often surprised at how fast the processor works. You will quickly get used to its great speed.
These are some conditions that affect your results:
size of pieces you put in bowl – all should be about the same
amount of food you process – don’t add too much at a time
type of processing you choose – continuous or pulse/chopping
Adding Food While Processing
When you want to add liq­uid while machine is run­ning, pour it through open feed tube. This is especial­ly useful when making mayonnaise, bread dough, cakes and many other recipes. A small hole in the pusher allows you to add liquids in a very slow, steady stream—useful when making sauces like mayonnaise.
When you want to add small pieces of food like cheese, meat or garlic cloves while machine is running, drop them through open feed tube.
To prevent spills when adding flour, sugar and other dry ingredients, use a funnel.
Removing Processed Food
Before removing processed food, move control switch
to OFF and wait for blade to stop spinning. Then remove cover by turning it clockwise. Never try to remove cover and work bowl together; this can damage work bowl.
If blade continues to turn when control switch is OFF, unplug machine before removing cover. Do not use machine any further. Call 1-800-726-0190 immediately for assistance.
After processing liquids, remove work bowl from base of processor before removing metal blade. Turn handle of bowl clockwise to unlock bowl from base and lift bowl straight up.
A locking device on metal blade prevents it from mov­ing up on motor shaft while machine is in use. If blade holds bowl in a locked position, jiggle white center section of blade lightly. It should release.
It is important not to let metal blade fall out of work bowl as you empty it. Here are three ways to prevent it from falling out:
1. Before tilting bowl, use spatula to remove food from around blade. Carefully remove blade by finger grip on top of center plastic part.
2. Hold top of blade in place with finger or spat­ula while pouring out processed food.
3. Make sure your hands are dry. Insert finger through hole in under­side of bowl and place thumb on rim of bowl. Grip inside of blade shaft firmly to hold blade in place.
8
Slicing And Shredding Less Than 3 Cups Of Food
1. Assemble clear work bowl on base in usual way.
2. Pick up adapter stem. Note that round base is notched at one end. Center section is hexagonal (six-sided) and top section is flat on both sides.
Hold stem firmly by flat top and push it down as far as it will go on motor shaft.
3. Hold slicing or shredding disc with its longer collar down (the side that reads “THIS SIDE DOWN”). Always
handle slicing or shredding discs by rims. Never touch sharp cutting blades.
Slide disc over stem and push it down until its center collar is flush with hexagonal section of stem.
4. Put cover on work bowl, lock it into place and insert food in feed tube. (If you are slicing, first cut one end of food flat. Place in feed tube flat side down.) See page 11 for guidelines on how to get consistent slices and shreds.
5. Insert pusher. Use mod­erate pressure to push down on pusher with one hand while holding control switch in PULSE position with other hand until food is sliced or
shredded. This will only take a few seconds.
Wait until disc stops spinning before removing cover. When it stops, remove cover before removing work bowl. Never try to remove cover and work bowl together; this could damage work bowl.
6. Remove slicing or shredding disc before removing work bowl. To remove it, grasp flat top section of adapter stem and lift it straight up.
Then turn bowl clockwise to remove it from base and lift it straight up.
Slicing And Shredding More Than 3 Cups Of Food
1. Substitute chute attach­ment for clear work bowl.
Pick up empty work bowl, holding it in both hands with handle toward you and chute toward right. Put bowl on base, fitting center tube over motor shaft and placing handle slightly to left of front center (7 o’clock).
Hold bowl by handle and turn bowl counter­clockwise as far as it will go. It will click into locked position.
2. Pick up adapter stem. Note that round base is notched at one end; cen­ter section is hexagonal (six-sided) and top sec­tion is flat on both sides.
Hold stem firmly by flat top and push it down as far as it will go on motor shaft.
3. Hold ejector disc with side that reads “THIS SIDE DOWN” down. Slide ejector disc over adapter stem, pushing it down so it fits over notched top of round section of stem.
4. Hold slicing or shredding disc with its longer collar down (the side that reads “THIS SIDE DOWN.”) Always
handle slicing or shredding discs by rims. Never touch sharp cutting blades.
Slide disc over stem and push it down until its center collar is flush with hexagonal section of stem.
5. Put cover on work bowl and turn it counterclock­wise to lock it into place.
Place receptacle for processed food on counter under chute. You can use bowls or saucepans. Those with high (up to 6 inches, 21cm) straight sides work best.
6. Put food in feed tube. Remember to cut one end of food flat if you are slicing, and to insert in feed tube flat side down.
Insert pusher and push down on it with one hand while holding control switch in PULSE position with other hand. Ejector disc will direct food through chute into recep­tacle. Total amount of food you can slice or
9
shred with Handy Prep
is limited only by size of receptacle under chute. You can replace full receptacle with empty one and continue slicing or shredding.
Wait until slicing or shred­ding disc stops spinning before you remove cover. When it stops, remove cover before trying to remove work bowl. Never try to remove cover and work bowl together; this could damage work bowl.
To remove slicing or shredding disc, grasp flat top of adapter stem and pull straight up. You must remove discs before removing work bowl.
Food Prep Guide
Your Cuisinart
®
Handy Prep™makes many everyday food preparation tasks much easier and faster. Use these guidelines to get the best food results. For larger amounts (more than 3 cups processed) when slicing and shredding, use the chute attachment.
Food Blade Preparation/Method Results/Notes
Bread Metal blade Break or cut into 1-inch or Crumbs for fillings/ toppings/crusts. For
smaller pieces. Pulse to buttered bread crumbs, butter bread first chop, then process until or add melted or softened butter through crumbs are desired texture feed tube while processing. For herbed
bread crumbs, chop herbs first.
Butter or Metal blade Chop garlic, herbs or zest Smooth creamy flavored butter or Cream first. Cut butter/cheese into cheese spreads. Cheese, tablespoon size pieces. Flavored Process until smooth; Cheese Dips add liquids last if using. & Spreads
Cheeses, Metal Blade Remove hard rind, cut into “Grated” hard cheese, texture from Hard – 3/4-inch or smaller cubes. With coarse to fine. Process longer for Asiago, machine running, drop through finer texture. Locatelli, feed tube and process “grated” Parmesan, to desired texture. Hard cheese should not be Romano shredded – use chopping
Slicing Disc Have cheese at room temperature. technique for results similar to
Remove hard rind. Stand pieces grated/shredded cheeses. in feed tube – use light pressure to slice.
Cheeses, Shredding Disc Chill cheeses. Cut to fit feed Shredded or sliced cheeses suitable for Medium-Hard Slicing Disc tube. Stand cheese in feed salads, pizzas, tacos, casseroles, etc. Such as tube; use light pressure to slice Cheddar, or shred. Swiss, etc.
Cheeses, Soft Shredding Disc Chill (best results, freeze 20 – Do not slice soft cheeses. Shredded Such as 30 minutes) cheese; cut to fit cheeses are suitable for salads, pizzas, Mozzarella feed tube. Stand cheese in tacos, casseroles, etc.
feed tube; use light pressure to shred.
Citrus Peel Metal Blade Remove zest from fresh, washed Chopped citrus zest. For best chop, add
& dried citrus using vegetable sugar or salt from recipe when processing. peeler, leaving bitter white pith on fruit. Cut in 1-inch pieces. Pulse to chop, then process until zest is desired texture.
10
Food Blade Preparation/Method Results/Notes
Cooked Fruits Metal Blade Steam, poach or boil fruits or Smooth purées suitable for side dishes or & Vegetables vegetables cut in 1-inch or baby food. Always consult with your for Purées or smaller pieces until tender. pediatrician/family physician concerning Baby Foods Process up to 1-1/2 cups at a the best foods for your baby and when to
time, adding cooking liquid introduce new foods to his/her diet. Prepare (water, stock, broth or milk) as in single serving amounts or in amounts up needed for desired texture. to 1-1/2 cups, which may be refrigerated or Season as needed. frozen for later use. Cooked potatoes
should not be processed using metal blade – the result will be a “gluey” texture. Cooked potatoes may be shredded using the shredding disc (see Potatoes).
Cookies Metal Blade Cut or break into 1-inch or May be used as crumb toppings or for (Hard/Crisp) smaller pieces. Pulse to chop crumb crusts. Add softened or melted or Crackers then process until crumbs butter, sugar, spices as needed.
reach desired texture.
Cream – Metal Blade Process up to 1 cup chilled Excellent, quick topping for desserts or hot Heavy, cream until it reached desired beverages. For sweetened cream, add Whipping thickness. sugar after about 30 seconds. Volume will
not be as great as with a mixer/whisk.
Fruits, Raw Metal Blade Peel, core, remove pits and Use fresh fruit purées as an addition to
seeds. Cut into 3/4-inch pieces. savory sauces or as dessert sauces. Pulse to chop, then process to Strain seeds from sauce if needed. desired texture. For fruit or berry purées, process until smooth, adding sugar as needed.
Shredding Disc Cut washed and dried fruits to For larger amounts, use chute Slicing Disc fit feed tube. Arrange in feed tube attachment.
cut side down, solidly to prevent tilting/slipping. Use moderate
pressure to shred or slice.
Herbs Metal Blade Pulse to chop, then process Use clean, dry herbs. Remove leaves from
continuously to reach desired stems before chopping. texture. Work bowl and blade must be clean and dry.
Mayonnaise Metal Blade Follow favorite 1-egg recipe, Raw egg mayonnaise not recommended.
adding oil through drip hole Use pasteurized liquid egg products or in pusher. substitutes. Follow proper food safety
procedures.
Meat, Poultry – Metal Blade Cut into 3/4-inch cubes, chill. Do not overprocess unless purée is Uncooked Process up to 8 ounces at one desired. Can be used for burgers, chilies,
time. Use pulse to chop to meatloaf, patés, terrines, etc. desired texture.
Slicing Disc Trim visible fat from meat. Remove Processor sliced meats are perfect for stir-fry
and discard skin from poultry. dishes. Cut meat to fit feed tube. Wrap in plastic wrap and freeze on a baking sheet until firm but not frozen solid. Use firm pressure to slice.
11
Guidelines for Perfect Slices and Consistently Uniform Shreds
1. Choose food with care. Fruits and vegetables should be fresh, firm and not overripe.
2. Prepare food first. Always remove large hard pits and seeds. When slicing, cut one end flat and place in feed tube cut side down.
3. Pack feed tube carefully. Food should fit snugly but not so tight that it
prevents pusher from moving. (Bottom of feed tube is slightly larger than top. If food is too big for top, try inserting from bottom.)
4. Pack feed tube for
desired results.
For small, round slices
Food Blade Preparation/Method Results/Notes
Meats, Metal Blade Cut meat into 3/4-inch or smaller Chopped meats can be used for salads or Poultry – cubes/pieces. Pulse to chop to spreads. For Baby/Junior Foods, add broth Cooked desired texture. Process up to or other liquid as needed. Always consult
8 ounces at a time. with your pediatrician/family physician con-
cerning the best foods for your baby and when to introduce new foods to his/her diet.
Muffins, Metal Blade Use metal blade to “sift” dry Batters for small recipes of muffins and Quick Breads ingredients; remove. Process wet quick breads can be prepared quickly and
ingredients, return dry ingredients with little fuss. to work bowl and pulse to blend. See Cuisinart recipes.
Pastry/ Metal Blade Use recipe, pg 30 or other favorite Can prepare pastry for single crust pie. Pie Crust recipe using recipe method. Repeat for a 2-crust pie, do not double.
Peanut Butter Metal Blade Process up to 1-1/2 cups peanuts Fresh nut butters contain no additional oils, or Nut Butters or other nuts. Pulse to chop sugar or salt unless you choose to add
first, then process continuously them. Nut butters can be kept for several until ground nuts form a ball. months tightly covered and refrigerated.
For chunky-style, add a handful of nuts before processing is completed.
Potatoes, Shredding Disc Trim to fit feed tube as needed. Use chute attachment for larger Cooked Slicing Disc Shred or slice using light pressure. amounts.
Potatoes, Raw Shredding Disc Trim as needed to fit feed tube. Use chute attachment for larger amounts.
Slicing Disc Shred or slice using medium
pressure.
Vegetables, Metal Blade Peel vegetable & cut into pieces Raw 3/4-inch or smaller. Keep pieces
similar size for most even chop. Pulse to chop, or process to “grind” or “purée. For small items such as garlic or shallots, drop through feed tube while machine is running to chop.
Shredding Disc Peel and cut to fit feed tube. Cut For soft vegetables, use light to moderate Slicing Disc one end flat, place in feed tube flat pressure. For firmer vegetables, use mod-
end down. For cabbage remove erate to medium pressure. and discard core. Do not use shredding disc for cabbage.
Yeast Doughs Metal Blade Process dry ingredients to blend, Makes a scant 1 pound of dough, enough
then add yeast mixture/liquid for a single small (8 x 4 x 2-1/2 – inch loaf through feed tube in a steady pan) or free form bread. See recipes for stream as fast as the flour will more ideas. absorb it. After mixture forms ball, process for 46 – 60 seconds to knead.
12
or short shreds from car­rots, zucchini and other long vegetables, cut them in 4-inch (10cm) lengths; pack them tightly upright. For long slices or shreds, cut them in 2-inch (5cm) lengths.
5. Adjust pusher pressure
to food texture.
Never push down hard on pusher.
Use light pressure for soft fruits and vegetables like bananas, mush­rooms, strawberries and tomatoes and for all cheeses and pack them horizontally.
Use medium pressure for most food — apples, cel­ery, citrus fruit, potatoes, zucchini. Use firm pres­sure for really hard veg­etables like carrots and yams.
TROUBLESHOOTING
These are some problems that beginners with a food processor sometimes expe­rience, along with their solutions.
Food is unevenly chopped
Try to process less food at one time. Pulse/chop until pieces of food are no larger than 1/2 inch (1.25cm). Then run machine continuously, checking consistency often.
Liquid leaks from bottom of work bowl onto motor base
Remove work bowl from base as soon as you fin­ish processing. Do not remove metal blade first. When work bowl and
blade are removed together, blade drops down and forms almost perfect seal against bowl.
Liquid leaks out between work bowl and cover when machine is running
Never use more than 1-1/2 cups (360ml) of a very thin liquid. The thicker the liquid, the more you can use. With thick mixtures like pan­cake or cake batter, for example, you can process as much as 2 cups (480ml).
Slices are uneven or slanted
Pack feed tube carefully. Maintain even pressure on pusher.
Carrots or similar food falls over in feed tube
Cut food into equally sized pieces, not over 4 inches (10cm) long. Use enough pieces to fit feed tube snugly.
Cut carrots in half and insert one piece point-side down and the other stem­side down.
A few pieces of food remain on top of slicing or shredding disc
You can improve this by raising and lowering (bouncing) pusher when food is almost all sliced or shredded.
Cheese spreads out and collects on top of shred­ding disc
Cheese was not cold enough, or pressure on pusher was too great. Always use light pressure when processing cheese.
CLEANING AND STORING
Keep your food processor ready for use on a kitchen counter. When it’s not being used, leave it unplugged. Don’t leave it with cover in locked position; this could damage the off-on mechanism.
Store blades and discs in safe, convenient place, as you would sharp knives — out of the reach of children.
All parts except motor base are dishwasher safe and we recommend washing them in the dishwasher ON THE TOP RACK. Due to intense water heat, wash­ing the work bowl, work bowl cover and accessories on the bottom rack may cause damage over time.
Insert work bowl upside down. Remember where you place sharp blades and discs, and unload them carefully.
To simplify cleaning, rinse work bowl, cover, pusher and blade or disc immedi­ately after use so food won’t dry on them.
If you wash blades and discs by hand, do it careful­ly. Avoid leaving them in soapy water, where they may disappear from sight. To clean metal blade, fill work bowl with soapy water, hold blade by its center plastic part and move it up and down on center shaft. Use of a spray attachment is also effec­tive. If necessary, use a brush.
Work bowl is made of Lexan
®
polycarbonate plas­tic, which is shatter resist­ant and heat resistant.
Chopping certain foods may scratch or cloud work bowl. Among them are rice, whole spices and oils like wintergreen. If you like to prepare your own spice blends, you may want to keep a second bowl just for that purpose.
Base housing is made of touch plastic with high impact resistance. Its smooth surface will look new for years. Keep a sponge handy as you work and wipe spills from base. Wipe in direction away from motor shaft. Do not use abrasive spray clean­ers on base or pusher.
Four rubber feet on under­side of base keep it from moving on most work sur­faces when machine is pro­cessing heavy loads. Clean feet from time to time; if rubber surface is not clean, machine may move on counter. If feet leave spots on counter, spray with spot remover and wipe with damp sponge. If any trace of spot remains, repeat procedure and wipe area with damp sponge and non-abrasive cleaner.
IMPORTANT: Never store any blade or disc on motor shaft. No blade or disc should be placed on shaft except when work bowl is in place and processor is about to be used.
FOR YOUR SAFETY
Like all powerful electrical appliances, your food processor should be han­dled with care.
Follow these guidelines to protect yourself and your family from misuse that could cause injury.
Handle and store metal blade and discs carefully. Their cutting edges are very sharp.
Never put adapter stem on motor shaft until work bowl is securely locked in place.
Always make certain that adapter stem is down on motor shaft as far as it will go.
Always insert metal blade in work bowl before putting ingredients in work bowl.
When slicing or shred­ding food, always use pusher. Never put your fingers or a spatula into feed tube.
Always wait for blade or disc to stop spinning before you remove cover from work bowl.
Be careful not to let metal blade fall out of work bowl when you empty bowl. Remove it before tilting bowl or hold it in place.
TECHNICAL DATA
The line voltage and frequency approximate for your machine are shown on label on underside of base.
An automatic temperature­controlled circuit breaker in motor ensures protection against motor burnout. If processor runs for excep­tionally long time when chopping, mixing or knead­ing thick or heavy mixtures in successive batches, motor may overheat. If this happens, processor will stop. Turn it off and wait for motor to cool off before proceeding.
It will usually cool off within 10 minutes. In extreme cases, it could take an hour.
Safety switches prevent machine from operating when work bowl or cover is not locked into position. Motor stops within seconds when control switch is turned off or cover is unlocked. If motor should ever continue to run, do not attempt to remove cover. Remove plug from outlet and immediately notify the Cuisinart Consumer Service Center.
13
WARRANTY
CUISINART
®
HANDY PREP
FOOD PROCESSOR LIMITED THREE-YEAR WARRANTY
This warranty supersedes all previous warranties on Cuisinart®Handy Prep
Food Processors.
This warranty is available to consumers only. You are a consumer if you own a Cuisinart®Handy Prep™Food Processor that was purchased at retail for personal, family or household use. Except as otherwise required under applicable state law, this warranty is not available to retailers or other commercial purchasers or owners.
We warrant that your Cuisinart®Handy Prep
Food Processor will be free of defects in material and workmanship under normal home use for three years from the date of original purchase.
However, return of the product registration card does not eliminate the need for the consumer to maintain the original proof of purchase in order to obtain the warranty benefits. In the event that you do not have proof of purchase date, the purchase date for purposes of this warranty will be the date of manufacture.
We suggest that you complete and return the enclosed product registration card promptly to facilitate verification of the date of original purchase.
If your food processor should prove to be defective within the warranty period, we will repair it (or, if we think necessary, replace it) without charge to you. To obtain warranty service, please call our Consumer Service Center toll-free at 800-726-0190 or write to:
Cuisinart 150 Milford Road East Windsor, NJ 08520
To facilitate the speed and accuracy of your return, please also enclose $7.00 for shipping and handling of the product; under California law, only proof of purchase is required. Please also be sure to include a return address, description of the product defect, product serial number, and any other information pertinent to the product’s return. Please pay by check or money order.
NOTE: For added protection and secure handling of any Cuisinart
®
product that is being returned, we recommend that you use a traceable, insured delivery service. Cuisinart cannot be held responsible for in-transit damage or for packages that are not delivered to us. Lost and/or damaged products are not covered under warranty.
Your Cuisinart®Handy Prep
Food Processor has been manufactured to strict specifications and has been designed for use with the Cuisinart®Food Processor authorized accessories and replacement parts for your model. This warranty expressly excludes any defects or dam­ages caused by accessories, replacement parts or repair service other than those that have been authorized by Cuisinart.
This warranty does not cover any damage caused by accident, misuse, shipment or other than ordinary household use.
This warranty excludes all inci­dental or consequential dam­ages. Some states do not allow the exclusion of or limita­tion of incidental or conse­quential damages, so the fore­going may not apply to you.
This warranty gives you specif­ic legal rights, and you may
have other rights that vary from state to state.
WARNING
Our food processors and accessories are carefully designed and manufactured with high-quality materials to assure your satisfaction and safety when you use them. Although accessories sold by companies other than Cuisinart may be compatible with your Cuisinart®Food Processor, they may also be extremely dangerous and expose the user to serious injury.
We specifically caution you not to use other brand accessories, such as juicers, which permit your processor to operate with exposed cutting or shredding discs.
If you have any questions about the safety features of your Cuisinart®Food Processor, please call us at the toll-free number that appears on the above warranty.
14
Guacamole
Serve guacamole with crispy tortilla chips, or use as a sauce or side dish.
Makes about 2 cups
Insert metal blade. Place tomato pieces in work bowl; pulse to chop, 10 to 15 times; remove and reserve. With machine running, drop garlic through feed tube and process until minced, about 10 seconds. Scrape work bowl. Add jalapeño and onion to work bowl, pulse to chop, 5 times. Add half the avocado pieces, cilantro leaves, lime juice, chili powder, cumin and salt. Pulse 5 times to chop avocado, then process until smooth, about 45 seconds. Add remaining avocado. Pulse until mix­ture is blended, and reaches desired texture for a chunky guacamole, or process until smooth and creamy, about 1-1/2 minutes. Cover and refrigerate for at least 30 minutes before serving to allow flavors to blend. Serve with tortilla corn chips.
Nutritional information per serving (2 tablespoons):
Calories 56 (73% from fat) • carb. 4g • pro. 0g • fat 5g • sat. fat 1g • chol. 0mg
• sod. 23mg • calc. 2mg • fiber 3g
Fresh Tomato & Roasted Pepper Salsa Cruda
Roasted Red Peppers add a little something extra to a traditional favorite.
Makes 1-1/2 cups
Insert metal blade. With machine running, drop garlic through feed tube; process 5 seconds to chop. Add half the tomatoes to work bowl. Pulse 5 times to chop, then process to chop finely, about 15 to 20 seconds. Add remaining tomatoes to work bowl along with roasted red pepper, cilantro, green onions, jalapeño pepper, lime juice, cumin and salt. Pulse 10 to 15 times (one second pulses), or process until desired texture is reached. Let stand 30 minutes before serving to allow flavors to blend.
15
1 ripe plum tomato (3-4 ounces), cored,
seeded, cut into eighths 1 garlic clove, peeled 1 jalapeño pepper, seeded and halved,
cut in 3/4-inch pieces 1/2 ounce red onion (about 1-inch piece),
trimmed, cut into 1/2-inch pieces 2 ripe avocados (20-24 ounces total),
peeled, pitted, cut into 3/4-inch chunks
2 tablespoons packed cilantro leaves,
washed & dried 2 tablespoons fresh lime or lemon juice 1/2 teaspoon chili powder 1/4 teaspoon ground cumin 1/4 teaspoon kosher salt
1 garlic clove, peeled 4 plum tomatoes (12 ounces), cored,
seeded, quartered
1/2 roasted red pepper, cut in 1-inch
pieces
1/3 cup lightly packed fresh cilantro
leaves, washed and dried
1 green onion, trimmed, cut 1-inch
pieces 1-2 jalapeño peppers, stemmed, halved,
seeded, cut in 1/2-inch pieces 2 tablespoons fresh lime juice 1/2 teaspoon ground cumin 1/4 teaspoon kosher salt
Recipe Notes:
Nutritional analyses are based on number of servings indicated. If a recipe produces a range of servings, they are based on the highest serving yield for that particular recipe.
16
Nutritional information per serving (1/4 cup):
Calories 8 (7% from fat) • carb 2g • pro. 0g • fat 0g • sat. fat • chol. 0mg
• sod. 58mg • calc. 7mg • fiber 0g
Hummus
Add a roasted red pepper and 1 teaspoon herbs de Provence for a variation.
Makes about 2 cups
Insert metal blade. Add parsley to work bowl. Process to chop, 5 seconds; remove and reserve. With machine running, drop garlic through feed tube. Process until finely chopped, about 5 sec­onds. Add chick peas, tahini, lemon juice, water and cumin to work bowl; process until smooth, 1-1/2 to 2 minutes, stopping to scrape work bowl as needed one or two times. With the machine running, add the olive oil in a steady stream and process until the mixture is smooth and creamy. Taste and season with kosher salt and freshly ground pepper. Transfer to a bowl, cover and let stand for 30 minutes or longer to allow flavors to blend. Refrigerate if not serving in 30 minutes.
Note: Tahini is a sesame seed paste available most grocery stores.
Nutritional information per serving (2 tablespoons):
Calories 30 (38% from fat) • carb. 4g • pro. 2g • fat 1g • sat. fat 0g • chol. 0mg
• sod. 29mg • calc. 16mg • fiber 1g
Herbed Chevre & Sun-dried Tomato Torta
Makes about 1-1/2 cups
Insert metal blade. Place sun-dried tomatoes, herbs de Provence, pine nuts and olives in work bowl. Pulse to chop, 5 times. Line a 2-cup bowl or mold with plastic wrap. Spoon the sun-dried tomato mixture into the bottom of the prepared mold; reserve. Wipe the work bowl and metal blade clean with a paper towel.
Insert the metal blade. With the machine running, drop the garlic through the feed tube and process 10 seconds to chop. Scrape the work bowl. Add the herbs, process to chop finely, 15 seconds. Add cheese, salt, pepper and 2 - 3 drops hot sauce, process 20 to 30 seconds to combine.
1/4 cup loosely packed flat parsley leaves 1 clove garlic, peeled 1 can (19 ounces, 540g) chickpeas,
rinsed and drained 2 tablespoons tahini (see Note) 2 tablespoons fresh lemon juice
1/4 cup water 1/2 teaspoon ground cumin 1/4 cup extra virgin olive oil kosher salt and freshly ground black pepper
to taste
4 sun-dried tomatoes, oil packed, with 1
tablespoon oil 1/2 teaspoon herbs de Provence (or basil
or thyme) 1 tablespoon toasted pine nuts 3-4 imported black olives, pitted 1 clove garlic, peeled 1/4 cup mixed fresh herbs, loosely
packed (such as parsley, thyme, basil,
oregano, marjoram, sage, etc.)
6 ounces cream cheese (may use
reduced fat), cut in 1-inch pieces
6 ounces Chevre or other goat cheese,
chilled, cut in 1-inch pieces 1/8 teaspoon kosher salt 1/8 teaspoon freshly ground pepper 2 - 3 drops hot sauce such as Tabasco
®
to taste
17
Gently spoon some of the cheese mixture over the bottom of the bowl, pressing down gently. Spoon in the remaining cheese mixture and smooth over the top. Cover with plastic wrap and refrigerate until ready to use.
To unmold: remove plastic wrap. Arrange fresh herbs or other greens over the exposed “top” of the molded cheese, so that some will come out from the edges. Place a flat plate or server over the bowl and invert so that the “top” becomes the “bottom”. Carefully lift up the bowl and gently remove the plastic wrap. Serve with crackers, pita wedges, bagel chips or baguette slices.
Nutritional information per serving (2 tablespoons):
Calories 104 (73% from fat) • carb. 2g • pro. 5g • fat 9g • sat. fat 5g • chol. 16mg
• sod. 165mg • calc. 87mg • fiber 0g
Vinaigrette
Makes 1-1/2 cups
This basic vinaigrette can be easily changed by using a flavored vinegar or oil, or by
adding fresh or dried herbs. Add a touch of sugar for a little sweetness.
Insert metal blade and turn on machine. Drop garlic through feed tube and process until minced about 5 seconds. Add vinegar, mustard, salt and pepper to work bowl. While machine is running, pour oil through feed tube in thin stream and process until completely mixed and emulsified, about 5 to 10 seconds.
Nutritional information per serving (1 tablespoon):
Calories 81 (98% from fat) • carb. 0g • pro. 0g • fat 9g • sat. fat 1g • chol. 0mg
• sod. 43mg • calc. 1mg • fiber 0g
Creamy Ricotta Herb Dressing/Dip
This is a good light dressing for potato salad or other fresh vegetable salads. It also
makes a nice dip for fresh crudités.
Makes about 1-1/2 cups
Insert metal blade. With machine running, drop shallots and garlic (if using) through feed tube and process to chop, 5 seconds. Scrape work bowl. Add fresh herbs; pulse to chop, 5 times. Add ricotta, yogurt, dry mustard, salt, pepper. Process until creamy and smooth, about 20 seconds.
1 small garlic clove, peeled 1/3 cup wine vinegar 1 tablespoon fresh lemon juice 1 tablespoon Dijon mustard
1/2 teaspoon kosher salt 1/8 teaspoon freshly ground black pepper 1 cup vegetable oil
(may use half olive oil)
2 shallots, peeled and halved 1 clove garlic, peeled (optional) 1/4 cup fresh flat-leaf parsley 1 tablespoon fresh tarragon leaves 1 teaspoon fresh thyme leaves 2-3 fresh basil leaves
3/4 cup part skim ricotta cheese 3/4 cup buttermilk or fat free plain yogurt 1/2 teaspoon dry mustard 1/2 teaspoon each kosher salt and freshly
ground pepper
18
Transfer to a resealable container, cover and let stand for at least 30 minutes before using, to allow flavors to blend and develop. Refrigerate unused portions. Will keep about 5 days, refrigerated.
Nutritional information per serving (2 tablespoons):
Calories 33 (33% from fat) • carb. 3g • pro. 3g • fat 1g • sat. fat 1g • chol. 86mg
• sod. 86mg • calc. 71mg • fiber 0g
Coleslaw
Shred cabbage in just seconds using your Handy Prep™.
Makes about 6 cups
Assemble processor with chute attachment, ejector disc and slicing disc. Slice cabbage through chute into large bowl. Insert shredding disc, and shred carrots through chute into bowl. Toss cab­bage and carrots with remaining ingredients.
Nutritional information per serving (3/4 cup):
Calories 73 (55% from fat) • carb. 7g • pro. 1g • fat 4g • sat. fat 1g • chol. 1mg
• sod. 109mg • calc. 45mg • fiber 2g
Asian Carrot Salad
This salad goes nicely with grilled seafood or chicken.
Makes 4 – 6 servings
Assemble processor with chute attachment, ejector disc and slicing shredding disc. Shred carrots. Insert slicing disc, slice onion and red pepper. Toss vegetables to combine; reserve.
Switch to clear work bowl. Insert metal blade. Place peanuts in work bowl. Pulse to chop, 5 times; remove and reserve. With machine running, drop garlic and ginger through feed tube, process 5 seconds to chop. Add cilantro and pepper flakes to work bowl, pulse to chop, 5 times; scrape work bowl. Add vinegar and soy sauce to work bowl. Process to blend, 5 seconds. With machine run­ning, add oils in a steady stream; process until dressing is emulsified, 5 to 10 seconds. Add dress­ing to carrot mixture and toss to combine. Let salad stand 15 to 20 minutes before serving to allow flavors to blend.
1 small head green cabbage (1-1/2
pounds), cut to fit feed tube
1 medium carrot (3 ounces), trimmed,
peeled, and cut to fit feed tube
1/2 cup reduced fat mayonnaise 2 tablespoons vinegar
kosher salt and freshly ground black pepper to taste
1 pound carrots, trimmed & peeled, cut
to fit feed tube horizontally
1 small red onion (2-3 ounces), peeled,
halved vertically
1 small red bell pepper, stemmed,
cored, seeded, cut to fit feed tube 1/4 cup roasted unsalted peanuts 1 small clove garlic, peeled
2 slices fresh ginger root, each about
the size of a quarter 1 tablespoon fresh cilantro leaves 1/4 teaspoon pepper flakes 2 tablespoons rice vinegar 1 teaspoon low-sodium soy sauce 2 tablespoons vegetable oil 1 tablespoon Asian (toasted) sesame oil
19
Nutritional information per serving:
Calories 126 (57% from fat) • carb. 12g • pro. 3g • fat 9g • sat. fat 1g • chol. 0mg
• sod. 342mg • calc. 30mg • fiber 3g
Marinated Cucumber Salad
Makes about 3 cups
Assemble processor with chute attachment, ejector disc and slicing disc. Slice cucumbers into bowl. Slice onion into bowl. Toss cucumbers and onion with remaining ingredients and let sit for 30 minutes to allow flavors to combine.
Drain before serving.
*You may vary the salad by using flavored vinegar such as raspberry, or changing the herb.
Nutritional information per serving (1/2 cup):
Calories 38 (0% from fat) • carb. 9g • pro. 2g • fat 0g • sat. fat 0g • chol. 0mg
• sod. 667mg • calc. 35mg • fiber 2g
Potatoes au Gratin
To make Potatoes au Gratin for a larger group, double or triple the recipe using
the chute attachment and ejector disc.
Makes 6 servings.
Preheat oven to 375°F. Generously butter 9-inch square or other 10-cup baking dish.
Insert shredding disc and shred cheese using medium pressure; remove and reserve. Insert metal blade and turn on machine. Drop garlic through feed tube, and process until minced about 5 seconds.
Bring evaporated milk, cream and garlic to simmer in small pot.
Assemble processor with chute attachment, ejector disc and slicing disc. Slice potatoes. Make an even layer of half the potato slices in bottom of baking dish. Sprinkle with salt, pepper and half the cheese. Add remaining potatoes in layer over cheese season and pour hot cream mixture over top. Bake until potatoes are tender, liquid is absorbed, and top is browned – about 1 hour. Sprinkle remaining cheese on top, 5 minutes before end of cooking.
Nutritional information per serving:
Calories 279 (44% from fat) • carb. 28mg • pro. 11g • fat 14g • sat. fat 8g • chol. 48mg
• sod. 126mg • calc. 337mg • fiber 2g
3 medium cucumbers (1-1/2 pounds
total), peeled, halved lengthwise, seeded, ends cut flat, cut to fit feed
tube 1/2 medium red onion, peeled 1/4 cup white wine vinegar *
1 tablespoon kosher salt 1 tablespoon granulated sugar 1 teaspoon dried dill*
freshly ground black pepper to taste
4 ounces Swiss, Gruyère or cheddar
cheese 1 small garlic clove, peeled 1 cup evaporated fat free milk 1/2 cup heavy cream
1-1/2 pounds russet potatoes (medium
sized), peeled, halved lengthwise, ends cut flat
kosher salt and freshly ground black pepper to taste
20
Savory Sweet Potato & Carrot Bake
Full of beta carotenes, this pleasant alternative to traditional sweet potato dishes is
particularly good with turkey, pork or game dishes.
Preheat oven to 325° F. Brush a 6-cup shallow oval or other similar sized baking dish with 1 table­spoon melted butter.
Assemble processor with chute attachment, ejector disc and shredding disc. Place medium bowl under chute opening. Use firm pressure to shred sweet potatoes, carrots and cheese. Reserve.
Place clear work bowl on food processor base. Insert metal blade. Place bread, walnuts and butter in work bowl. Process until mixture is coarse crumbs, about 30 seconds; reserve. Place egg, egg white, flour, milk, sugar, thyme, sage, salt, hot sauce, and remaining butter in work bowl. Process until smooth and blended, 20 seconds. Pour over sweet potato/carrot mixture in bowl and stir to combine. Arrange in prepared baking dish and pat to even thickness. Top evenly with buttered crumb mixture. Bake in preheated 325° F oven for 1-1/2 hours, until vegetables are tender and crumb topping is golden brown and crispy. Serve hot.
Nutritional information per serving:
Calories 214 (42% from fat) • carb 25g • pro. 7g • fat 10g • sat. fat 5g • chol. 49mg
• sod. 228mg • calc. 131mg • fiber 3g
Meatloaf with Mushrooms & Herbs
For a change, use a combination of turkey breast and lean pork loin.
Makes 4 servings
1 tablespoon unsalted butter, melted 3/4 pound sweet potatoes or yams,
peeled, cut to fit feed tube
3/4 pound carrots, peeled, cut to fit feed
tube
2 ounces sharp white cheddar cheese,
cut to fit feed tube
2 slices good quality white bread (2
ounces), torn into pieces
2 tablespoons walnuts
3 tablespoons unsalted butter, cut into
1/2-inch pieces, divided 1 large egg 1 large egg white 1/3 cup all-purpose flour 1/2 cup evaporated fat free milk 1/2 teaspoon thyme 1/2 teaspoon rubbed sage 1/2 teaspoon kosher salt 1/4 hot sauce such as Tabasco
®
cooking spray
1/4 cup flat parsley leaves, loosely
packed
2 slices good quality bread, broken into
pieces
1 small onion (3 ounces), peeled and
quartered
3 - 4 mushrooms (2 ounces), cleaned and
quartered
1 teaspoon Italian herb blend or herbs
de Provence
1 teaspoon kosher salt
1/2 teaspoon freshly ground pepper 1 large egg 1/4 cup reduced fat milk 2 tablespoons sodium free tomato paste 1/2 pound cold boneless beef chuck or
round, cut into 3/4-inch cubes
1/4 pound cold boneless pork, cut into
3/4-inch cubes
1/4 pound cold boneless veal, cut into
3/4-inch cubes
21
Preheat oven to 400° F. Lightly coat a 7-1/2 x 3-3/4 x 2-1/4 -inch loaf pan with cooking spray.
Insert metal blade. Place parsley and bread in work bowl; pulse 5 times, then process until bread is medium coarse crumbs, about 20 seconds. Add onion, mushrooms, herbs, salt, and pepper to work bowl. Pulse to chop finely, 10 to 15 times. Remove and transfer to a medium bowl. Place egg, milk and tomato paste in work bowl. Process to blend, 5 seconds; add to onion mixture and stir. Place beef cubes in work bowl. Pulse to chop finely, 15 to 20 long pulses. Add to mixture in bowl. Place pork and veal cubes in work bowl. Pulse to chop finely, 15 to 20 long pulses. Add to bowl. Stir meats into vegetable/crumb mixture until completely combined. Spoon into prepared loaf pan and press to compact. Bake in preheated 400° F oven for 40 to 45 minutes, until top is browned and internal temperature measures 160° - 170° F when tested with an instant read ther­mometer. Let meatloaf stand in pan for 10 minutes. Drain if necessary, remove, slice and serve. Alternatively, meat can be shaped into meatballs of desired size and baked until browned and internal temperature measures 160°-170° F. Use with your favorite tomato sauce or brown gravy.
Nutritional information per serving:
Calories 196 (26% from fat) • carb. 12g • pro. 24g • fat 6g • sat. fat 2g • chol. 57mg
• sod. 465mg • calc. 59mg • fiber 1g
Ginger Chicken & Vegetable Stir-Fry
The hard part of stir-fries is the preparation – with the DFP-3 it is simple and quick.
Makes 2 - 3 servings
Freeze chicken until hard to the touch but still easily pierced with tip of sharp knife, about 20 to 30 minutes. Meanwhile, prepare vegetables. Insert metal blade and turn on machine. Drop garlic and ginger through feed tube and process until minced, about 10 seconds. Remove and reserve. Insert shredding disc. Pack carrots in feed tube and shred. Remove and reserve. Insert slicing disc and slice remaining vegetables separately. Remove and reserve. Slice semi-frozen chicken. Toss chicken with 1-1/2 teaspoons cornstarch. Stir together remaining cornstarch and water; reserve. Combine broth, soy sauce, and sesame oil; reserve.
Heat work or large stick free skillet over high heat. Add 1-2 tablespoons of vegetable oil. Stir-fry chicken, in batches if necessary, until firm. Remove and reserve as done. Add more oil between batches as necessary. Add remaining vegetable oil to wok or skillet, reduce heat to medium-high and cook ginger and garlic, stirring, until fragrant, about 15 seconds. Add carrots and stir-fry for 15 seconds. Add remaining vegetables and stir-fry until just tender, about 1 minute. Return chicken to skillet along with broth mixture. Raise heat and cook until bubbling. Lower heat and stir in cornstarch mixture, cook just until thickened. Season to taste and serve immediately.
1/2 pound trimmed boneless, skinless
chicken breast, cut to fit feed tube* 1 medium garlic clove, peeled 1 1/2-inch piece fresh ginger, peeled 2 carrots (about 4 ounces) peeled, cut
to fit feed tube horizontally 4 ounces mushrooms, stems trimmed 4 medium scallions, trimmed and cut
into 2-inch lengths 1 small zucchini (about 4 ounces, cut to
fit feed tube vertically)
1 medium red pepper (about 5 ounces),
cored, seeded, cut to fit feed tube 3 teaspoons cornstarch, divided 1-1/2 teaspoons water 1/3 cup chicken broth 1-1/2 tablespoons less sodium soy sauce 1 teaspoon sesame oil 4 tablespoons vegetable oil
22
* Substitute 1/2 pound of well-trimmed pork loin or beef flank steak for the chicken. Trim, freeze and slice as described for chicken.
Nutritional information per serving (3 servings):
Calories 342 (58% from fat) • carb. 12g • pro. 24g • fat 22g • sat. fat 2g • chol. 58mg
• sod. 455mg • calc. 33mg • fiber 3g
Pizza
You can prepare a pizza easily from start to finish without cleaning with work bowl between steps. First, grate and shred cheeses and reserve. Second, prepare the dough, residual cheese in the work bowl will just add flavor. Then slice or shred any toppings such as vegetables and cooked meats. (If you use raw meats, you will have to wash and dry the work bowl and blades used.) Finally prepare your sauce. Remember – go from dry to wet. Pizza toppings can be as creative as your individual taste. But remember, too much of any topping will make your pizza wet and soggy, no matter how long it is baked.
Pizza Dough
Makes 14 ounces dough to make:
One 15-inch pizza -or-
Two 8 -10-inch pizzas -or-
Four 5 - 6-inch pizzas
Combine yeast, sugar and warm water in a 1-cup liquid measure with pour spout. Stir to combine and let stand until the mixture is foamy, about 5 minutes. (Note: If the mixture does not become foamy, the yeast is not active, discard and begin again with fresh yeast.)
Insert metal blade. Place flour, salt and oil in work bowl. Process 5 seconds to combine. Scrape work bowl. Add cold water to yeast mixture; stir. With the machine running, add the yeast mixture in a steady stream, as fast as the flour will absorb it. When the mixture forms a ball, process for one minute to knead. Remove dough, dust lightly with flour and place in a 1-quart resealable food storage bag. Press out air and seal. Let dough rise in a warm, draft-free place until doubled in size, about 1 hour.
Nutritional information per serving:
Calories 203 (17% from fat) • carb. 36g • pro. 5g • fat 4g • sat. fat 1g • chol. 0mg
• sod. 295mg • calc. 8mg • fiber 1g
3/4 teaspoon active dry yeast 1/4 teaspoon granulated sugar 1/4 cup warm water (105°-110°F, test
using instant read thermometer)
1-1/2 cups all-purpose flour
1/2 teaspoon salt 1 tablespoon olive oil 1/4 cup cold water
1 clove garlic, peeled 1 can (14 – 15 ounces) tomatoes in
thick juice/sauce
3 tablespoons sodium-free tomato
paste
1/2 teaspoon basil 1/2 teaspoon oregano 1/4 teaspoon thyme 1/4 teaspoon red pepper flakes
(optional, for a spicier sauce)
23
Quick & Simple Pizza Sauce
Makes 2 cups sauce (use 1/2 cup for each 15-inch pizza), sauce may be frozen
Insert metal blade. With machine running, drop garlic through feed tube and process 5 seconds. Scrape work bowl. Add tomatoes with juice, tomato paste, basil, oregano, thyme, and red pepper flakes if using. Pulse 10 to 15 times to chop and blend sauce. If sauce is too chunky for your taste, process until desired consistency is reached.
Cook’s Tip: Freeze remaining sauce in ?-cup portions to have ready to make pizzas.
Nutritional information per serving:
Calories 8 (3% from fat) • carb. 2g • pro. 0g • fat 0g • sat. fat 0g • chol. 0mg
• sod. 35mg • calc. 8mg • fiber 1g
White Wheat Baguette
This bread has a crunchy, crispy crust with a dense chewy interior.
Makes one baguette, about 12 ounces.
Stir yeast and sugar into warm water in a 1-cup liquid measuring cup with pour spout.Let stand until foamy, 3 to 5 minutes.
Place both flours and salt in work bowl fitted with metal blade, process 10 seconds to combine. Add cold milk to foamy yeast mixture and stir to blend with a fork. With the machine running, add the liquid in a steady stream, as fast as he flour absorbs it. Process until dough forms a ball, then process 45 seconds longer to knead dough. (If too dry, add cold water, one teaspoon at a time, processing 10 seconds after each addition. If too wet/sticky, add bread/all-purpose flour one table­spoon at a time, processing 10 seconds after each addition.) Remove dough, shape into a ball, and dust lightly with 1 teaspoon of flour. Place in a resealable 1-quart food storage bag, press out air, and seal tightly. Let dough rise in a warm, draft-free spot, until doubled in volume, about 1 hour.
Punch dough down to deflate; let rest 10 minutes. Roll dough into a rectangle, the roll up from the long side jelly-roll style. Pinch seam and ends to seal. Roll to length of about 12 to 14 inches. Place on a parchment lined baking sheet and dust loaf lightly with remaining flour. Cover loosely with a sheet of plastic wrap that has been coated lightly with cooking spray. Let rise in a warm, draft-free spot, until doubled in volume, about 1 hour.
About 15 minutes before baking, preheat oven to 425° F. Use a serrated knife to make 4 diagonal slits about 1/4-inch deep across the loaf. Place in oven and bake until browned and crusty, about 20 to 25 minutes. Bread will sound hollow when tapped. Transfer to a rack to cool. For best results, allow to cool for 20 to 30 minutes before slicing.
Nutritional information per 2-ounce serving:
Calories 122 (8% from fat) • carb. 23g • pro. 5g • fat 1g • sat. fat 0g • chol. 2mg
• sod. 308mg • calc. 37mg • fiber 2g
2-1/4 teaspoons active dry yeast (1 packet) 1/4 teaspoon granulated sugar 3 tablespoons warm (110° F) water 1 cup bread or all-purpose flour
1/2 cup whole wheat flour 3/4 teaspoon salt 1/2 cup cold lowfat milk 3 teaspoons flour for dusting, divided
24
Cherry Walnut Cinnamon Buns
You may substitute chopped dried apricots for the cherries and almonds for the walnuts.
Makes 9 buns, about 2-1/2 inches each.
Stir yeast and 1 teaspoon of the granulated sugar into warm water in a 1-cup liquid measure with pour spout. Let stand until foamy, 5 to 10 minutes. Insert metal blade. Place the brown sugar and cinnamon in work bowl and process 10 seconds. Add walnuts and pulse to chop, 5 times; remove and reserve. Add 1/2 cup cold milk to yeast mixture and stir to blend.
Place flour, remaining granulated sugar, cream cheese and salt in work bowl; process 10 seconds. With machine running, add yeast mixture in a steady stream, as fast as the flour will absorb it. Process until dough forms a ball, then process 45 seconds to knead dough. Remove dough and gather into a ball – dough will be slightly sticky. Dust lightly with flour and place in a 1-quart reseal­able food storage bag; press out air and seal tightly. Let dough rise in a warm, draft-free place, until doubled in volume, about 1 hour. Place cherries in a small, heatproof bowl and cover with 1/2 cup boiling water. Let stand 15 minutes. Drain and pat dry. Lightly coat an 8-inch square baking pan with cooking spray.
Punch dough down to deflate; let rest 10 minutes. On a lightly floured surface, roll the dough into a rectangle 14 x 7-inches. Brush dough with melted butter all the way to the short sides, but leaving a 1/2-inch border on each of the long sides. Sprinkle the buttered area evenly with the brown sugar/walnut mixture; distribute the drained and dried cherries evenly over the sugared area. Brush unbuttered edges with water. Roll from one long side jelly-roll style. Pinch seam to seal. Use a serrated knife to cut the roll into 9 pieces, each about 1-1/2 inches in length. Place the rolls in the prepared pan, cut side up. Cover with plastic wrap and place in a warm, draft-free place, until nearly doubled in volume, about 1 hour. Fifteen minutes before baking, preheat oven to 350°F.
When ready, brush tops with remaining tablespoon milk. Bake in preheated 350°F oven for 25 to 30 minutes until golden brown and puffed. Let cool on a rack for 15 minutes. Drizzle with Powdered Sugar Glaze. Serve warm. (May be made ahead – do not glaze. Reheat, covered with foil in a 225°F oven for 20 to 30 minutes, then glaze and serve.)
Powdered Sugar Glaze
Insert metal blade in work bowl. Place powdered sugar, vanilla and 2 teaspoons of the milk in work bowl. Process until smooth, about 15 to 20 seconds. If too thick to drizzle, add remaining teaspoon milk.
Nutritional information per bun:
Calories 172 (22% from fat) • carb. 30g • pro. 4g • fat 4g • sat. fat 2g • chol. 7mg
• sod. 47mg • calc. 39mg • fiber 1g
3/4 teaspoon active dry yeast 2 tablespoons warm (110° F) water 4 teaspoons granulated sugar, divided 3 tablespoons packed brown sugar 1 teaspoon ground cinnamon 1/4 cup walnut halves 1-1/2 cups all-purpose flour 1 tablespoon lowfat cream cheese
1/8 teaspoon salt 1/2 cup + 1 tablespoon lowfat milk 1/4 cup dried tart cherries (may substitute
raisins) 1/2 cup boiling water 1-1/2 tablespoons unsalted butter, melted
cooking spray
Powdered sugar glaze (recipe fol-
lows)
1/3 cup powdered sugar 1/2 teaspoon vanilla extract
2-3 teaspoons lowfat milk
25
Lemon Macadamia Nut Bread
Makes 10 slices (about 3/4-inch thick)
Our quick and easy version of a classic favorite. For a change,
try the Orange Ginger version. Glaze: 3 tablespoons fresh lemon juice 1/4 cup granulated sugar
Preheat oven to 350° F. Lightly coat a 7-1/2 x 3-3/4 x 2-1/4 -inch loaf pan with cooking spray.
Insert the metal blade. Place the flour, baking powder and salt in the work bowl and process 5 sec­onds; remove and reserve. Cut the lemon peel into 1-inch pieces and place in work bowl with 1/4 cup of the sugar. Process until zest is finely chopped about 1 minute. Add remaining 1/4 cup sugar and butter; process until creamy, 20 to 30 seconds. Add egg, process 10 seconds; scrape work bowl. Add yogurt; process 10 seconds – mixture will look slightly curdled. Spoon flour mixture then macadamia nuts over creamed mixture. Pulse until flour just disappears, 5 to 6 pulses. Do not over process. Spoon into prepared pan and level top. Bake in preheated 350° F oven for 35 to 40 minutes, until bread is light golden brown and a tester comes out clean when inserted in the center. While bread is baking, stir lemon juice and sugar for glaze together until sugar is dissolved. Spoon the glaze over the hot bread a little at a time, allowing the glaze to absorb before adding more. Let stand until glaze is completely absorbed, then remove from pan and let cool completely on a wire rack. This bread is actually better the second day. Wrap tightly in plastic wrap to store.
Orange Ginger Variation:
Use orange zest and orange juice in place of lemon. Substitute crystallized ginger that has been cut in 1/2-inch pieces for the nuts. For more orange flavor, add 1/3 teaspoon orange flower water (available in specialty food shops) to batter when adding yogurt.
Nutritional information per serving:
Calories 164 (39% from fat) • carb. 23g • pro. 2g • fat 7g • sat. fat 3g • chol. 31mg
• sod. 79mg • calc. 13mg • fiber 1g
Bread:
cooking spray 3/4 cup all-purpose flour 1/2 teaspoon baking powder 1/4 teaspoon salt 2 strips lemon zest/peel, 2 x 1/2-inch,
bitter white pith removed
1/2 cup granulated sugar 3 tablespoons unsalted butter, cut in
1/2-inch pieces 1 large egg 2 tablespoons fat free plain yogurt 1/3 cup unsalted, lightly toasted
macadamia nuts
26
Cranberry Pistachio Scones
Cranberry Pistachio Scones are very good served with clotted cream or butter and mar-
malade. You may substitute walnuts, pecans, almonds, or hazelnuts for the pistachios.
Makes 8 scones
Pour the boiling water over the cranberries in a small heatproof bowl. Let stand 10 minutes to plump. Preheat oven to 375° F. Line a baking sheet with parchment paper. Drain cranberries and pat dry, reserve.
Insert the metal blade. Place the brown sugar in the work bowl. Pulse to break up, 10 times. Add flour, baking powder and salt. Process to blend, 10 seconds. Add cold butter pieces, process until mixture resembles a coarse meal, 30 seconds. Add yogurt, cranberries and pistachios to work bowl. Pulse until just incorporated, about 5 to 10 pulses. Turn dough out onto a lightly floured work surface. With lightly floured hands, turn dough to knead, 4 times. (Press dough flat, fold, press flat again, repeat for a total of 4 times.) Roll dough into a circle, 7 inches in diameter, 3/4-inch high. Use a serrated knife or pizza cutter to cut dough into 8 wedges. Place the wedges on the prepared baking sheet in a circle with the wedges about 1/2-inch apart. Brush lightly with milk and sprinkle lightly with granulated sugar. Bake in preheated oven for 25 to 30 minutes, until golden and firm, but not dry. Let cool on a rack for 10 minutes before serving.
Nutritional information per serving:
Calories 192 (38% from fat) • carb. 26g • pro. 4g • fat 8g • sat. fat 4g • chol. 16mg
• sod. 108mg • calc. 43mg • fiber 1g
Fluffy Buttermilk Biscuits
Hot fluffy biscuits for breakfast or dinner are easy with the Little Pro.
Makes eight 2-inch biscuits
Preheat oven to 425°F. Line a baking sheet with parchment paper.
Insert metal blade. Place flour, baking powder, baking soda, and salt in work bowl. Process 5 seconds. Add butter and shortening to work bowl. Pulse 10 times, the process until the mixture resemble coarse corn meal, about 30 seconds. Scrape work bowl. Drizzle buttermilk over flour mixture. Process until the mixture just forms clumps, about 5 seconds, do not let form a ball. Turn out onto a lightly floured surface. With floured hands gather and press into a ball. Flatten, fold and turn 4 times to knead. Roll out into an 8 x 4-inch rectangle. Use a floured 2-inch round biscuit/cookie cutter to cut into 8 biscuits. Place on parchment lined baking sheet and brush with milk. Bake until puffed and lightly browned, 10 to 12 minutes. Fluffy biscuits are best served hot or warm.
1/3 cup dried cranberries 1/2 cup boiling water 2 tablespoons packed brown sugar 1-1/3 cups all-purpose flour 2 teaspoons baking powder 1/8 teaspoon salt
4 tablespoons cold unsalted butter, cut
into 1/2-inch pieces 2/3 cup fat free vanilla yogurt 1/4 cup shelled pistachios
milk for brushing granulated sugar for sprinkling
1-1/8 cups all-purpose flour 1-1/4 teaspoons baking powder 1/4 teaspoon baking soda 1/4 teaspoon salt
4 tablespoons cold unsalted butter, cut
in 1/2-inch pieces 5 tablespoons buttermilk 2 teaspoons milk
27
Nutritional information per serving (1 biscuit):
Calories 120 (46% from fat) • carb. 14g • pro. 2g • fat 6g • sat. fat 4g • chol. 16mg
• sod. 155mg • calc. 17mg • fiber 0g
Double Chocolate Brownies with Walnuts
Rich, fudgy and very satisfying, these yummy brownies take just minutes to prepare in
your Cuisinart
®
Food Processor.
Makes 25 brownies, each about 1-1/2 inches square.
Preheat oven to 350° F. Brush an 8-inch square baking pan with some of the melted butter. Fold a sheet of aluminum foil so that it is 8 inches wide by 15 inches long. Place it in the baking pan so that the long ends extend over two opposite sides of the pan and fold the excess down the outside edge. Brush the foil bottom and sides.
Place the unsweetened chocolate and espresso powder in the work bowl of the processor. Using long pulses, pulse to chop the chocolate, 10 times. With the machine running, add the hot butter through the feed tube in a steady stream and process until chocolate is melted. Scrape work bowl and lid. Add sugars to work bowl. Process until smooth, about 10 seconds. Place eggs and vanilla in a liquid measuring cup with pour spout, stir with a fork to blend. With the machine running, add the egg mixture in a steady stream, process 10 seconds. Scrape the work bowl. Place the flour, nuts and chocolate morsels on top of the chocolate mixture. Pulse until just combined, 4 to 6 times. Do not over process. Transfer the mixture to the prepared baking pan. Use a spatula to smooth the top. Bake in the preheated 350° F oven for about 35 to 40 minutes, until top is some­what shiny and just beginning to crack. Cool on a rack for 10 minutes, then loosen the foil sides and use them to lift the brownies out of the pan. Cool completely on a rack before cutting.
Cut into 25 squares.
Nutritional information per serving (1 brownie):
Calories 120 (55% from fat) • carb. 13g • pro. 1g • fat 8g • sat. fat 4g • chol. 28mg
• sod. 7mg • calc. 11mg • fiber 1g
Chocolate Cupcakes
Quick comfort food.
Makes 6 cupcakes.
8 tablespoons unsalted butter, melted
and hot
3 ounces unsweetened chocolate, cut
into 1/2 -inch pieces 1 teaspoon instant espresso powder 1/2 cup granulated sugar 1/2 cup packed dark or light brown sugar
2 large eggs 1 teaspoon pure vanilla extract 1/3 cup all-purpose flour 1/3 cup walnut halves and pieces 1/3 cup milk chocolate morsels
cooking spray
1/2 cup all-purpose flour 1/4 teaspoon salt 1/8 teaspoon baking powder 1 ounce unsweetened chocolate, cut in
1/2-inch pieces
1/2 cup sugar
3 tablespoons water 2 tablespoons unsalted butter 3 tablespoons buttermilk 1/2 teaspoon pure vanilla extract 1 large egg
28
Preheat oven to 350° F. Lightly coat six 1/2-cup muffin/cupcake tins with cooking spray.
Insert metal blade. Place flour, salt and baking powder in work bowl; process 5 seconds. Remove and reserve.
Pulse/chop chocolate and 1/4 cup sugar 8 times, then process until chopped finely, about 45 sec­onds. Bring water and butter to boil in small saucepan or in the microwave. With machine running, pour liquid through feed tube and process 15 seconds, until smooth. Stir together buttermilk, egg and vanilla extract. With machine running, add to chocolate mixture, 5 seconds. Scrape work bowl. Add reserved dry ingredients; process until just blended, about 10 seconds. Do not over process.
Divide batter among tins and bake until toothpick inserted in center comes out clean, 20 to 25 min­utes. Cool in tins for 10 minutes. Gently loosen cupcakes and remove from tin. Transfer to wire racks to cool completely before frosting. Frost with chocolate frosting if desired.
Nutritional information per cupcake (unfrosted):
Calories 177 (37% from fat) • carb. 26g • pro. 3g • fat 8g • sat. fat 4g • chol. 46mg
• sod. 123mg • calc. 19mg • fiber 1g
Chocolate Frosting
Makes about 3/4 cup
Insert metal blade. Place powdered sugar and cocoa in work bowl. Pulse to sift, 10 times. Add butter. Process 10 seconds. Combine 2-1/2 tablespoons of the milk with vanilla. With machine running, add milk mixture in a steady stream. Process until smooth and creamy, adding additional milk 1 teaspoon at a time until frosting is of spreading consistency.
Nutritional information per serving:
Calories 160 (34% from fat) • carb. 27g • pro. 1g • fat 7g • sat. fat 4g • chol. 17mg
• sod. 6mg • calc. 15mg • fiber 1g
Apple Streusel Pie
For the pastry:
1-1/2 cups powdered sugar 1/4 cup unsweetened cocoa powder 3 tablespoons unsalted butter, cut in
1/2-inch pieces, at room temperature
2-3 tablespoons milk 1/2 teaspoon pure vanilla extract
pinch salt
1-1/4 cups all-purpose flour 1 tablespoon granulated sugar 1/4 teaspoon salt 1/2 cup (1 stick / 4 ounces) cold unsalted
butter, cut in 1/2-inch pieces
2 tablespoons cold vegetable shorten-
ing, cut in 1/2-inch pieces
3-4 tablespoons ice cold water
29
For the streusel topping:
For the apple filling:
For the pastry:
Insert the metal blade. Place the flour, sugar and salt in the work bowl. Pulse to combine, 3 times. Add cold butter and shortening. Pulse until the mixture resembles coarse crumbs, but still has small pieces of butter visible, 15 one-second pulses. Sprinkle the mixture with 3 tablespoons of the ice water and process just until it begins to clump together. If the mixture seems too dry, add just enough of the remaining water to form the clumps. Turn the dough out onto work surface and form a ball. Flatten into a disc, 6 inches in diameter. Cover and refrigerate at least 30 minutes before rolling out.
For the Streusel Topping:
Insert the metal blade. Pulse to break up the brown sugar, 4 to 5 times. Add flour, oatmeal and sugar to work; pulse 5 times. Add cold butter pieces and nuts, pulse 15 one-second pulses. Transfer to a small bowl and work the mixture with fingers until it is large crumbs. Reserve.
For the Apple Filling:
Assemble the white chute bowl fitted with the slicing disc. Arrange a bowl under the chute. Add the lemon juice to the bowl. Place the apple quarters in the feed tube. Use medium pressure to slice. Toss the apples in the juice to coat. Add sugar, flour, spices, and raisins or cranberries if using. Toss apples gently but thoroughly to combine.
To assemble and bake the pie:
Arrange rack in lower third of oven. Preheat oven to 400°F. Dust the chilled dough lightly with flour and place on a lightly floured surface. Roll the dough into a 15-inch round, rolling from one edge to the opposite edge, rotating the dough as you go, and adding just enough flour to keep it from stick­ing to the counter or pin. Do not roll back and forth. When it has been rolled to size, gently fold it in half, then in half again. Lift carefully and center in a 9-inch pie plate. Unfold, and let the pastry set­tle into the pan. Trim edges to an even ?-inch overhang. Brush rim of pastry with water and fold in; press and seal. Use fingers or fork to crimp decoratively. Fill evenly with apple mixture, pressing apple mixture lightly to remove air pockets. Top evenly with streusel topping. Place pie on rack in preheated oven (may place foil or baking sheet on rack underneath to catch drips). Bake in pre­heated 400° F oven until browned and bubbly, about 55 to 60 minutes. If crust or topping appears to brown to quickly, cover loosely with a sheet of foil. Let cool for at least 1 hour on a rack before serving.
1-1/2 tablespoons fresh lemon juice 2 pounds apples (see note), peeled,
cored and quartered 2/3 cup granulated sugar 1/4 cup all-purpose flour
1 teaspoon cinnamon 1/2 teaspoon ginger 1/4 teaspoon freshly ground nutmeg 1/2 cup raisins or dried cranberries
(optional)
1/2 cup packed brown sugar 1/2 cup all-purpose flour 1/2 cup rolled oats (old-fashioned, not
quick cooking)
5 tablespoons cold unsalted butter, cut
in 1/2-inch pieces
1/2 cup walnut halves/pieces
30
Nutritional information per serving (one slice):
Calories 387 (41% from fat) • carb. 42g • pro. 4g • fat 18g • sat. fat 9g • chol. 34mg
• sod. 55mg • calc. 26mg • fiber 3g
Creamy Cheesecake with Walnut Crumb Crust
Makes one 8-inch cheesecake, 6 to 8 servings
Preheat oven to 375° F.
Insert the metal blade. Place the broken graham crackers in the work bowl and pulse to break up, 10 times. Add walnuts and cinnamon to work bowl, pulse 12 to 15 times. With machine running, drop butter through the feed tube and process until the mixture is coarse buttered crumbs. Reserve 1/4 cup of the crumb mixture and press the remaining crumbs into the bottom of an 8-inch springform or cheesecake pan. Bake for 7 minutes. Remove and let cool completely (may place in freezer to speed cooling process). When cool, wrap pan with heavy duty aluminum foil so that it comes up the sides of the pan.
Wipe work bowl and blade clean with a paper towel. Place cream cheese and sugar in work bowl. Process until smooth, 15 to 20 seconds. Scrape work bowl. Add eggs, vanilla and almond extracts to work bowl. Process until smooth, 20 seconds. Scrape work bowl. Add sour cream to work bowl. Process until blended, 20 seconds. Pour the cheesecake batter into the cooled, wrapped pan. Sprinkle the reserved crumb mixture evenly over the top. Place in an aluminum baking pan that is at least 10 inches in diameter. Add hot water to the pan to a depth of 1/2 inch. Bake in the pre­heated oven for 1 hour and 30 minutes. Cheesecake will be lightly colored, sides will be firm, but center will be jiggly. Remove from the pan of hot water and remove foil. Place on a wire rack to cool completely, then wrap in plastic wrap and refrigerate at least 8 hours or overnight before unmolding. Serve in wedges.
Nutritional information per serving (based on 8 servings):
Calories 283 (40% from fat) • carb. 34g • pro. 8g • fat 13g • sat. fat 6g • chol. 76mg
• sod. 372mg • calc. 157mg • fiber 1g
15 2-1/2 -inch low fat graham cracker
squares, broken in quarters 1/8 cup walnuts 1/2 teaspoon ground cinnamon 1-1/2 tablespoons unsalted butter, cut into 6
pieces 12 ounces lowfat cream cheese, cut in
1-inch pieces
2/3 cup sugar 2 large eggs 1-1/2 teaspoons pure vanilla extract 1/2 teaspoon almond extract 2/3 cup fat free sour cream
Cuisinart offers an extensive assortment of top quality products to make life in the kitchen easier than ever. Try some of our other countertop appliances and
cookware, and Savor the Good Life
®
.
www.cuisinart.com
Coffeemakers
Food
Processors
Toaster Ovens Blenders
Cookware
Ice Cream
Makers
© 2003 Cuisinart
Cuisinart® is a registered trademark of
Cuisinart
150 Milford Road
East Windsor, NJ 08520
Printed in China
03CU13489
IB-4495A
Loading...