Cub Cadet RT 35, FT24, RT 45, RT 65 User Manual
Illustrated Parts Manual
Printed In USA
Front Tine & Rear Tine Tillers
Model FT24, RT 35, RT 45 & RT 65
CUB CADET LLC, P.O. BOX 361131 CLEVELAND, OHIO 44136-0019
Form No. 769-08415
(September 17, 2012)
To The Owner
Thank You
Thank you for purchasing a Cub Cadet Tiller. It was carefully
engineered to provide excellent performance when properly
operated and maintained.
All information in this manual is relative to the most recent
product information available at the time of printing. Please be
aware that this Illustrated Part’s Manual may cover a range of
product specifications for various models.
Table of Contents
Engine Honda GC190LA ....................................... 28
Engine Model-170-TU ............................................ 52
Engine Model-170-VU ........................................... 62
Engine Model-270-V0 ............................................ 42
Components listed and/or illustrated in this manual may not be
applicable to all models. We reserve the right to change product
specifications, designs and equipment without notice and
without incurring obligation.
Throughout this manual, all references to right (RH) and left (LH)
are observed from the operating position.
Model Series 300 ..................................................... 4
Model Series 400 ....................................................10
Model Series 450 ....................................................16
Model Series 620 ................................................... 22
Record Product Information
To ease in ordering replacement parts, please locate the model
plate on the equipment and record the information in the
provided area to the right. You can locate the model plate by
looking beneath the seat.
Model NuMber
Serial NuMber
Painted Parts
When ordering painted service parts, a four digit color suffix must be added to the part number (e.g. 783-XXXXX-0637).
Please refer to the table below for current color codes:
0637 Black
4021 Yellow (Cub Cadet)
0499 Beige (Cub Cadet)
0685 Blue (Cub Cadet)
0691 Black Jack (Cub Cadet Commercial)
2
Page Left Blank Intentionally
33
Model Series 300
10
35
46
34
4
6
9
11
7
13
29
36
32
30
3
31
26
12
14
15
20
24
25
45
21
22
2
8
16
18
17
19
27
28
10
6
1
2
5
33
35
40
37
28
28
44
38
39
21
41
25
23
42
43
44
Model Series 300
Ref. Part Number Description
1. 912-04 42 Acorn Lock Nut, ⁄-20
2. 936-3020 Flat Washer, .271” x.630”
3. 720-0270A† Reverse Handle Grip
4. 731-1600 Handle Cover w/o throttle (390)
— 731- 06253A Handle Cover (340)
5. 710 - 0779A Truss Machine Screw, #10 x ⁄”
6. 720 - 0274 Handle Grip
7. 712-3 0 0 6 Hex Nut, ⁄-20 (390)
— 912-02 9 8 Jam Nut, 1/4-20 (340)
8. 726 - 0135† Cap Speed Nut
9. 686-0083 Clutch Handle Assembly
10. 720-0269 Clutch Grip
11. 710- 0 6 41 Hex Bolt, ⁄-20 x 2.25”
12. 931-1645B Clutch Handle Holder
13. 936 -014 0 Flat Washer, .385” x .62”
14. 686-0014C† Reverse Handle Assembly
15. 936-0264† Flat Washer, .344” x .62”
16. 649-04040 Handle Assembly Complete
17. 749-1401A Handle Brace
18. 736 - 0242 Bell Washer, .34”
19. 710 -06 053 Hex Bolt, ⁄-20
20. 786-0005 Depth Bar
21. 714-04043 Cotter Pin, Bow Tie
22. 712-04063 Hex Flange L-Nut, ⁄-18
Ref. Part Number Description
23. 786-0003 Tail Piece Bracket, Left
24. 786-0004 Tail Piece Bracket, Right
25. 911 - 0415 Clevis Pin
26. 710-0805 Hex Bolt, ⁄-18 x 1.5”
27. 710 -0189 Hex Bolt, ⁄-18 x 3”
28. 736-0242 Bell Washer, .340” x .872”
29. 7 11-10 3 6 A Hex Nut
30. 93 6- 0119 L-Washer, ⁄”
31. 710 -3008 Hex Bolt, ⁄-18
32. 786 - 0129 Cable Guide Bracket
33. 710 -06 04A Hex Washer Screw, ⁄-18 x .62”
34. 710- 0602 Hex Washer TT-Tap Screw
35. 738-0934A Shoulder Bolt, ⁄-18
36. 720-0195 Hand Knob
37. 750- 0470 Spacer
38. 936 -0171 Lock Washer, ⁄
39. 912- 024 0 Jam Nut, ⁄-20
40. 710 -0176 Hex Bolt, ⁄-18 x 2.75”
41. 912- 042 9 Nylon Hex Nut, ⁄-18
42. 686-0081A Wheel Hanger Bracket Assembly
43. 734-04623 Wheel, 8 x 1.75
44. 738-0929 Shoulder Screw, .496 x 1.445
45. 750-0890 Spacer
46. 710 -12 36 Carriage Bolt, ⁄-18 x 1
† If Equipped
55
Model Series 390
23
42
24
22
22
25
21
37
38
12
27
3
10
13
5
37
41
40
28
29
30
31
32
39
4
46
10
35
33
10
43
34
44
26
36
7
20
6
9
45
8
7
6
11
2
1
14
19
16
66
17
3
18
15
Model Series 390
Ref. Part Number Description
1. 712- 0392 Hex L-Stop Nut, ⁄-28
2. 936-3020 Flat Washer, 266” x .625”
3. 710 - 0599 Hex Washer TT-Tap Screw, ⁄-20 x .5”
4. 711- 0920 Belt Cover Bolt
5. 712- 04063 Hex Flange Top L-Nut, ⁄-18
6. 710-3005 Hex Head Screw, ⁄-16 x 1.25”
7. 756- 0313 Flat Idler Pulley, 2.12”
8. 786-0149 Idler Belt Keeper
9. 786-014 4 Idler Bracket
10. 712-0266A Hex Center Jam Nut, ⁄-16
11. 786- 0057 Belt Cover w/ rev.
12. 786-0043A Tine Shield
13. 710-30 08 Hex Head Cap Screw, ⁄-18 x .75”
14. 986-0091 Chain Case Assembly Complete
15. 686-0106 Outer Disc Plate Assembly
16. 714-04043 Cotter Pin, Bow Tie
17. 911- 0415 Clevis Pin
18. 642-0 023 Outer Tine Assembly, LH,
— 642- 0024 Outer Tine Assembly, RH
19. 642-0003 Inner Tine Assembly, Left
— 642-0002 Inner Tine Assembly, Right
20. 94 6 - 0918 Forward Clutch Cable
21. 946- 0953 Reverse Clutch Cable
22. 756-0585 Flat Pulley, 6”
Ref. Part Number Description
23. 950-0892 Spacer, .64” x 2.4”
24. 948-0350 Pulley Mounting Adapter
25. 736 -0112 Bell Washer, 525” x 1.5”
26. 712-3029 Hex Jam Nut, ⁄-20
27. 732- 0697 Return Spring
28. 786-0040B Reverse Bracket
29. 9 3 6- 0119 Lock Washer, ⁄
30. 710-0237 Hex Bolt, ⁄-24 x .625”
31. 756 -0971 Engine Inner Pulley
32. 756- 0600 Reverse Engine Pulley
33. 936 -0452 Bell Washer, .396” x ⁄”
34. 710-1039 Hex Bolt, ⁄-24 x 1.00”
35. 6 86 - 0013 Reverse Arm Assembly
36. 786- 0 0 41 Reverse Belt Keeper
37. 710 -0502A Hex L-Washer TT-Tap, ⁄-16 x 1.25”
38. 786-0145A Engine Plate
39. 786-0053 Tine Shield Bracket
40. 936 - 0171 L-Washer, ⁄”
41. 912- 024 0 Hex Nut, ⁄-20
42. 954-0428 Forward Drive Belt, ⁄ x 41.9”
43. 954- 0429 Reverse Drive Belt, ⁄ x 45.68”
44. 938-0102 Shoulder Screw, .498 x 1.445
45. 738-0930 Shoulder Screw, .560 x.165
46. 712-3004A Flangelock Nut, 5/16 - 18
77
Model Series 340
15
16
18
8
17
20
29
11
34
29
24
41
28
15
19
25
42
43
36
23
33
19
39
13
32
31
22
5
28
4
1
2
40
3
7
21
38
6
35
14
37
30
9
27
26
12
8
8
10
88
Model Series 340
Ref. Part Number Description
1. 986-0 091 Chain Case Assembly
2. 642-0002 Inner Tine Assembly, RH
3. 642-0003 Inner Tine Assembly, LH
4. 642-0004 Outer Tine Assembly, RH
5. 642-0005 Outer Tine Assembly, LH
6. 911 - 0415 Clevis Pin, .375 x 1.75
7. 714-04043 Bow Tie Cotter Pin
8. 710-0599 Screw, 1⁄4-20 x 0.500
9. 7 11 - 09 19 Bolt, Belt Cover
10. 712- 0392 Nut, 1/4-28, Lock
11. 712-3004A Nut, 5/16-18, Flange Lock
12. 936-3020 Flat Washer, .271 x .630 x .065
13. 738-0930 Shoulder Screw, .560 x .165 5/16-18
14. 786-0056 Belt Cover
15. 710-30 08 Hex Head Screw, 5/16-18 x .75
16. 712- 0 4 063 Nut, 5/16-18, Flange Lock
17. 786-0043A Tine Shield
18. 786 -0053 Bracket, Tine Shield
19. 686-0088 Idler Bracket Assembly
20. 710- 0189 Hex Head Screw, 5/16-18 x 3.00
21. 710-0237 Hex Head Screw, 5/16-24 x .625
22. 710-1039 Hex Head Screw, 3/8-24 x 1.00
Ref. Part Number Description
23. 710-30 05 Hex Head Screw, 3/8-16 x 1.25
24. 7 11-10 3 6 A Hex Nut, 5/16-18
25. 712-0266A Jamlock Nut, 3/8-16
26. 712-3029 Nut, 1/2-20, Jam
27. 7 3 6- 0112 Washer, .531 x 1.62 x .045
28. 93 6- 0119 Lock Washer, 5/16
29. 736-0242 Bell Washer, .340 x .872 x .060
30. 736 - 0312 Flat Washer, 1.26 x 1.87 x .150
31. 936-0452 Bell Washer, .396 x 1.140 x .095
32. 946-0918 Forward Clutch Cable
33. 948-0350 Pulley Adaptor
34. 950- 0892 Spacer, .64 ID x 2.4
35. 954-0428 Belt, 4L x 41.9 LG
36. 756- 0313 Pulley 1.88 OD
37. 756-0585 Pulley 6.00 OD
38. 756-0971 Inner Engine Pulley
39. 756- 0972 Outer Engine Pulley
40. 786- 0039B Belt Keeper Bracket
41. 786 - 0129 Cable Guide Bracket
42. 786-014 4 Idler Bracket
43. 78 6 -0149 Belt Keeper
99
Model Series 400
34
53
33
46
31
52
32
39
38
47
55
31
48
45
4
6
43
41
30
3
44
42
35
28
4
37
23
29
49
3
11
12
6
36
51
40
17
20
16
24
11
1
9
19
1010
2
5
15
50
54
27
14
13
18
10
10
25
21
26
7
6
8
6
22
Model Series 400
Ref. Part Number Description
1. 686-0044B End Cover Assembly
2. 710-0597 Hex Head Screw, ⁄-20 x 1
3. 710 - 060 4A Hex Head Screw, ⁄-18 x .625
4. 710-1238 Hex Head Screw, ⁄-18 x .875
5. 710 -3008 Hex Head Screw, ⁄-18 x .75
6. 712- 0 4 0 63 Nylon Hex Lock Nut, ⁄-18
7. 712- 0 4 0 6 4 Nylon Hex Lock Nut, ⁄-20
8. 712-040 65 Flange Lock Nut, ⁄-16
9. 712-0421 Wing Nut, ⁄-18
10. 715 - 0108 Spirol Pin
11. 926-0106 Cap Nut, ⁄ Rod
12. 731- 05512 Hole Plug
13. 732-04320 Torsion Spring
14. 738-04320 Shoulder Screw, .405 x .435 ⁄-18
15. 938- 0533 Shoulder Screw, .498 x 1.635
16. 938-0849 Stop Screw
17. 747- 0 432 Tiller Flap Rod
18. 750 -05349 Spacer
19.. 786-0090A Side Shield
20. 786 -0113A Rear Tine Shield
21. 786 -04092 Reverse Stop Arm
22. 786-04104 Drag Bar
23. 786-04352A Tine Shield Mounting Bracket
24. 786-0 4355A Tine Shield
25. 786-04356 Adjustable Depth Bar
26. 786-04363 Tail Bracket, LH
27. 786- 04364 Tail Bracket, RH
28. 649-04098A Upper Handle Assembly
Ref. Part Number Description
29. 6 8 6 -04135 Reverse Handle Assembly
30. 710-0189 Hex Head Screw, ⁄-18 x 3.00
31. 710 - 0599 Self-Tapping Screw, ⁄-20 x ⁄
32. 731-04735 Handle Select
33. 720- 0278A Foam Handle Grip
34. 710-3288 Hex Head Screw, ⁄-20 x 1.62
35. 731-06253A Handle Cover
36. 735 -04105 Plug End
37. 736-0242 Bell Washer, .340 x .872 x .060
38. 946-04504 Reverse Cable
39. 946-04506 Forward Cable
40. 747-04789 Clutch Bail
41. 750-0885A Spacer, .322 x .625 x 2.00
42. 786- 0340B Handle Crank
43. 786-04344 Handle Bracket, RH
44. 786-04345 Handle Bracket, LH
45. 786 -04358 Retainer Nut Bracket
46. 686- 0 414 4 Front Bumper
47. 731- 06529 Belt Cover
48. 736-0173 Flat Washer, .28 x .74 x .063
49. 738-0440 Spacer, .375 x .165
50. 710-04 605 Hex Head Screw, ⁄-18 x 1.50
51. 720-04173 Reverse Handle Grip
52. 936- 0176 Flat Washer, .265 x .938 x .120
53. 936-0451 Saddle Washer, .320 x .930 x .060
54. 710- 0502A SEMS Screw, ⁄-16
55. 710 -0896 Self Tapping Screw, ⁄-14 x .625
1111
Model Series 400
2
1
39
30
22
22
34
36
40
38
28
11
21
3
27
24
33
5
7
8
16
19
25
32
12
15
20
10
21
11
29
4
6
17
24
7
31
3
23
9
13
26
14
37
35
41
9
18
1212
Model Series 400
Ref. Part Number Description
1. 934- 04736 Complete Whl. Ass., 13 x 5 x 6
634 - 04735 Rim, 6.0 X 3.25
734 - 04163A Tire, 13 x 5 x 6
2. 714- 0143A Klik Pin
3. 684-04168 Idler Pulley Assembly
4. 710 - 0331 Hex Head Screw, ⁄-24 x 2.25
5. 710 -0170 Hex Head Screw, ⁄-24 x .625
6. 710-059 9 Self Tapping Screw, ⁄-20 x .500
7. 710-0606 Hex Head Screw, ⁄-20 x 1.50
8. 710-0672 Hex Head Screw, ⁄-18 x 1.25
9. 710-1880 Hex Head Screw, ⁄-18 x .75, Patch
10. 73 6 -0315 Washer, Flat, .760 x 1.50 x .120
11. 712- 04 0 6 4 Nylon Hex Lock Nut, ⁄-20
12. 712- 070 0 Nut, 9/16-18, Flange Lock
13. 718- 04407 Hub, ⁄ Spline
14. 732-04085 Extension Spring, .480 OD X 5.00 LG
15. 732-04276A Extension Spring, LT5 PTO
16. 936 -0119 Lock Washer, ⁄
17. 736-0173 Washer, .28 x .74 x .063
18. 714-04043 Cotter Pin, Bow Tie
19. 736-0343 Flat Washer, .330 X 1.25 X .120
20. 936-0452 Bell Washer, .396 x 1.140 x .095
Ref. Part Number Description
21. 736-3092 Flat Washer, .265 x 1.0 x .030
22. 738-04425 Shoulder Screw, .342 x .335 ⁄-28
23. 748-04087A Pivot Idler Spacer
24. 750- 04571 Shoulder Spacer, .260 x .785 x .538
25. 750-04907 Pivot Idler Spacer
26. 954-04090 V-Belt, 4L x 25.375 Long
27. 954 -04091 V-Belt, 3L x 29.125 Long
28. 756-04198A Engine Pulley
29. 756- 04355 Transmission Pulley
30. 756-0625 Cable Roller
31. 786- 0 4312 Idler Bracket, Forward
32. 786-04343 Cover Plate
33. 786-04346 Idler Bracket, Reverse
34. 786-04416A Mounting Frame, RH
35. 786-04 415B Mounting Frame, LH
36. 786-04357 Pulley Bracket
37. 786-04371 Pulley Shield
38. 642- 04071 Tine Assembly, LH
39. 642-04072 Tine Assembly, RH
40. 911- 0415 Clevis Pin, .375 x 1.75
41. 710-0896 Self Tapping Screw, ⁄-14 x .625
1313
Model Series 400
12
8
16
20
19
2
22
18
15
6
2
2
4
14
7
21
5
19
20
7
14
13
17
21
14
18
23
9
18
10
6
18
13
1
21
7
11
2
2
14
7
21
3
1414
Ref. Part Number Description
918 - 04815A Transmission Assembly
1. 919 - 04184A Housing, Transmission
2. 710-3008 Hex Screw, 5/16-18, .75, Gr5
3. 911- 04 8 44 Shaft, Tiller
4. 911- 04 8 5 4 Shaft, Wheel
5. 911-05028 Shaft, Worm
6. 714 - 0 4059 Key, Hi Pro .25 x 1.062
7. 716-0204 Retaining Ring
8. 716 - 04102 Retaining Ring, Int
9. 917-04380 Worm Gear, 61t, RH
10. 917-04381 Worm Gear, 30t, LH
11. 918- 04435 Bearing Cover
12. 921- 04030 Seal, Oil, .750 Shaft x 1.783 Bore
13. 921-04229 Gasket, Gear Housing
14. 721-04232 Seal, Oil, 1.00 Shaft x 2.00 Bore
15. 721-04271 Rubber Plug, Oil
16. 732- 0614 Wire Ring
17. 736-04305 Washer, Flat, 1.50 x 1.75 x .062
— 736-04306 Washer, Flat, 1.50 x 1.75 x .005
— 736-04307 Washer, Flat, 1.50 x 1.75 x .03
— 736-04308 Washer, Flat, 1.50 x 1.75 x .010
18. 736 -0745 Washer, Flat, 1.010 x 1.56 x .060
19. 9 41-04298 Cone Bearing
20. 941-04299 Bearing Cup
21. 741-3114 Ball Bearing
22. 786- 04366 Cover, Transmission
23. 786-04392 Cover, Transmission
* — The at washers listed are used as required to obtain .005 to
.015 in allowable end play on the drive shaft.
Model Series 400
1515
Model Series 450
46
32
30
44
30
45
41
33
34
35
38
23
34
40
24
26
17
13
14
28
10
21
16
3
22
6
19
2
27
31
39
38
4
20
15
20
8
9
1
43
63
49
50
31
51
48
34
52
12
35
34
37
11
29
25
34
59
60
47
42
5
60
53
54
62
65
18
7
61
64
36
55
56
58
57
1616
Model Series 450
Ref.
1. 747 -1152 Shaft Rod
2. 649-0034 Lower Handle Tube Assembly
3. 649- 0 041A Upper Handle Assembly
4. 710- 0946 Screw, 1/4-20 x 0.625
5. 710-30 05 Hex Head Screw, 3/8-16:1.25
6. 710-3056 Hex Head Screw, 5/16-18 x 3.25
7. 9 11- 0415 Clevis Pin, .375 X 1.75
8. 712-0324 Hexlock Nut, 1/4-20
9. 712- 0379 Flangelock Nut, 3/8-24
10. 912- 042 9 Hexlock Nut, 5/16-18
11. 710-1307 Stud, 5/16-18 x .75
12. 720 - 0210A Small Tee Knob
13. 720 -0278A Foam Grip, .970 x 11.0
14. 720 - 0313 Grip, .1875 x 1.00
15. 726-0273 Battery Clamp, 5/16
16. 7 26 - 0317 Cable Tie, 8.5 LG
17. 735- 0246A End Plug
18. 9 36 -0117 Washer, Flat, .385 x .620 x .033
19. 736 -0242 Washer, Bell, .340 x .872 x .060
20. 736-3090 Washer, Flat, .260 x .720 x .060
21. 938-0958 Spacer, Shoulder, .50 x .190 x .360
22. 747-1219A Clutch Bail
23. 784-019 0 Handle Adjustment Crank
24. 78 4 - 0191 Hex Nut Retainer Bracket
25. 7 8 6 -012 0 Tiller Depth Control
26. 786 -0181 Shaft Rod Lever
27. 735 - 0127 Washer, Rubber, .33 ID x .125
28. 914-0104 Cotter Pin, .072 x 1.12 LG
29. 686-0044B End Cover Assembly
30. 710 -0176 Hex Head Screw, 5/16-18 x 2.75
31. 710-30 08 Hex Head Screw, 5/16-18 x .75
32. 710-3022 Hex Head Screw, 3/8-16 x 2.75
33. 710-04 482 Hex Head Flange, 3/8-16 x .875
Part Number Description
Ref.
34. 712- 04063 Flangelock Nut, 5/16-18
35. 712-04065 Flangelock Nut, 3/8-16
36. 712- 0421 Wing Nut, 5/16-18 W/ Bell Washer
37. 926 - 0106 Speed Nut Cap, 1/4 ROD
38. 736-0204 Washer, Flat, .344 x .62 x .033
39. 938-0849 Screw, Hex, 5/16-18 x .75
40. 747-0432 Tiller Flap Rod
41. 750-0885A Spacer, .322 x .625 x 2.00
42. 786-0090A Side Shield
43. 78 6- 0113 A Rear Tine Shield
44. 786 - 0176 RH Handle Mount Bracket
45. 786 -0177 LH Handle Mount Bracket
46. 786-0178A Tine Shield
47. 786-0179 FRT Tine Shield Bracket
48. 786-0180 FRT Tine Shield Spacer Bracket
49. 686-0109A Shift Crank Assembly
50. 710 -1652 Screw, ⁄-20 x .625
51. 715- 0120 Spiral Pin, ⁄ x 1.0
52. 784-0208D Shift Cover
53. 911 - 0415 Clevis Pin
54. 712-305 4 Hex Nut, ⁄-24
55. 742-03 05A 13” Articulating Tine
56. 938-0689 Shoulder Bolt
57. 936-0253 Bell Washer, .515” ID x 1.14” OD
58. 938-0688 Shoulder Bolt
59. 784-0160 Tine Adapter Assembly, 18”
60. 714-04043 Internal Cotter Pin
61. 936 -0169 Lock Washer
62. 784-0161 Tine Adapter Plate
63. 731-07556 Cap
64. 936 -0208 Washer, Flat, .51 x 1.5 x .07
65. 710- 0376 Hex Head Screw, 5/16-18 x 1.00
Part Number Description
1717
Model Series 450
26
36
37
18
27
9
19
31
10
20
17
24
13
3
7
6
21
5
41
30
6
14
1
2
4
32
35
33
8
25
28
23
22
16
1818
34
42
38
12
40
11
15
39
32
Wheel shaft shown
for reference only.
33
29
Model Series 450
Ref.
Part Number Description
1. 6 86 -0111 Belt Cover Bracket Assembly
2. 710 -0170 Hex Bolt, ⁄-24 x .625
3. 710- 0513 Hex Bolt, ⁄-28 x .75”
4. 710- 0520 Hex Washer Screw, ⁄-16 x 1.50”
5. 710-1039 Hex Bolt, ⁄-24 x 1.0
6. 710-1652 Hex Washer Screw
7. 710 -3005 Hex Cap Screw, ⁄-16 x 1.25
8. 712-0266A Lock Jam Nut, ⁄-16
9. 712- 0 4063 Flangelock Nut, 5/16-18
10. 914 -010 4 Internal Cotter Pin
11. 912-30 66 Hex Nut, 1/2-20
12. 936-0921 Washer, Lock, 1/2
13. 936 -0176 Flat Washer, .25 ID x .93 OD
14. 936-0271 Spring Washer, .317 ID x .625 OD
15. 750- 019 4 Hub, .636 ID x 1.00 OD x .94
16. 936- 0452 Bell Washer, .396 ID x 1.14 OD
17. 738-0876A Shoulder Nut, ⁄-20
18. 9 46 -1117 Clutch Cable
19. 747-115 9 Idler Pulley Rod
20. 954- 0434 V-Belt
21. 756- 0405 Flat Idler w/ Flange, 3.75 OD
Ref.
22. 756- 0971 Outer Engine Pulley Half
23. 756- 0972 Inner Engine Pulley Half
24. 75 6-1162 Input Pulley
25. 786- 0064A Idler Bracket
26. 786 -0185A Belt Keeper Bracket
27. 786-0187 Shift Cover Bracket
28. 786-0193 Idler Belt Keeper
29. 934-04365A Wheel Assembly, 16.0 x 4.6 x 8
30. 936-3020 Flat Washer, .271 ID x .630 OD
31. 784-0158A Belt Cover
32. 710-05289 Hex Head Screw, ⁄-20
33. 712-040 6 4 Flange Lock Nut, ⁄-20
34. 710-0382 Hex Bolt, ⁄-13 x 5.0
35. 712-04150 Flange Lock Nut, ⁄-13
36. 723- 0381† Counterweight, 40 lbs.
37. 936-0326 Flat Washer
38. 936 - 0179 Washer, Flat, 1/2 x 1.25 x .100
39. 710-0653 Hex Screw, ⁄-20 x .375
40. 731-1595† Counterweight
41. 712- 0392 Lock Nut
42. 710-0506 Hex Head Screw, 1/2-13 x 5.50
Part Number Description
† If Equipped
1919
Model Series 450
20
3
16
28
11
11
10
34
35
29
16
16
37
37
36
47
41
38
38
45
27
15
38
38
48
19
14
21
49
32
1
33
46
31
37
29
13
16
42
30
37
12
17
28
12
16
46
5
33
51
2
6
7
23
44
40
50
38
24
9
38
25
39
18
43
26
8
47
4
36
22
2020
Model Series 450
Ref.
Part Number Description
1. 611- 0 021 Shaft Assembly, Tine, 18T
2. 611- 012 8 Shaft Assembly, Jack
3. 611- 012 9 Shaft Assembly, Shift Input
4. 611- 04 0 74A Shaft Assembly, Wheel, 33T
5. 617-0058 Gear Assembly, 30T Reverse Idler
6. 617- 0 0 59 Gear Assembly, 30T Tine Idler
7. 617- 00 6 0 Sprocket Assembly, 9T Tine Input
8. 617- 0061 Sprocket Assembly, 10T Whl Input
9. 617-00 62 Gear Assembly, 11T
10. 686-0108A RH Chain Case Housing Assembly
11. 710-0376 Hex Head Screw, 5/16-18 x 1.00
12. 710-1652 Screw, 1/4-20 x 0.625
13. 710 - 0448 4 Screw, :5/16-18 x 0.75
14. 750-0664 Spacer, .505 ID x .88 OD x .440
15. 711-13 49A Input Shaft, .75
16. 712- 0378 Nut, Hex, 7/16-20
17. 712- 0 4 0 63 Nut, Flangelock, 5/16-18
18. 913-0367 Endless Chain, #420 x 50 Links
19. 913- 0 4 8 4 Endless Chain, #50 x 54 Links
20. 716-08 65 Snap Ring, .500
21. 717- 0853A Clutch Collar
22. 717-158 2 A Gear Spur, 44T
23. 717-158 3 Gear Spur, 30T
24. 717-1584 Gear Spur, 30T
25. 717-1585 Gear Spur, 44T
26. 717-158 7 Gear Spur, 44T
Ref.
27. 717-1594 Gear Spur, 16T
28. 921-0378 Shaft Seal, 1.0
29. 721- 0379 Shaft Seal, .75
30. 786- 0238 Positioner Gear Bracket
31. 726- 0277 Tapered Cap Plug
32. 732- 04778 Compression Spring, .230 OD
33. 936 -0163 Washer, Flat, 1.03 x 1.62 x .03
34. 936- 0171 Washer, Lock, 7/16
35. 936- 0226 Washer, Flat,.474 x .879 x .064
36. 936-0351 Washer, Flat, .760 ID x 1.50 OD
37. 736-0407 Washer, Bell,.45 x 1.00 x .062
38. 736 -0518 Washer, Thrust, .445 x 1.92 x .060
39. 736-3088 Washer, Flat,1.595 x .635 x .062
40. 6 8 6 -0 4129 LH Chain Case Housing
41. 950 -0671 Spacer, .75 x 2.0 x .50
42. 738- 0645 Shaft Detent, .5 DIA
43. 738-0648 Shaft, Jack, .625 x 2.385
44. 738-04424A Shaft, Jack, .6250 x 5.0050
45. 941- 0600 Ball Bearing, 17 x 40 x 12:6203
46. 941- 0 420 Flange Bearing, 1.0 x 2.5 x 1.38
47. 741- 0421 Flange Bearing, .75 x 2.5 x 1.38
48. 941- 0563 Ball Bearing, 17 x 40 x 12:6203
49. 741- 0 862 Ball, Detent, .250
50. 750- 0258 Spacer, .315 x .750 x .375 LG
51. 950- 0570 Spacer, 1.0 ID x 2.0 OD x.5 LG
— 9 8 6 -04074 B Gear Case Assembly Complete
Part Number Description
2121
Model Series 620
6
8
37
38
18
23
35
10
26
30
23
24
22
11
25
5
33
29
34
28
19
17
5
31
21
5
5
3
7
1
5
16
5
3
4
36
26
12
14
4
13
20
9
15
5
2
27
2222
32
5
Loading...