CTX PV722E User's Guide [es]

PV722E Manual del Usuario

Manual del Usuario

PV722E

PV722E Manual del Usuario

INDICE

1. Importantes Instrucciones De Seguridad

2. Introduccion

3. Uso Recomendado Del Monitor

4. Controles y Ajustes

5. Declaración De Energía

6. Resolviendo Problemas

7. Informacion Tecnica

8. Presentación del producto

9. Especificaciones

PV722E Manual del Usuario

Importantes Instrucciones De Seguridad

FCC Statement

This equipment has been tested to comply with the limits for a class B digital device,

pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment

generates, uses and can radiate radio frequency energy and, if not installed and used

in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the

user is encouraged to try to correct the interference by one or more of the following

measures:

• Relocate the receiving antenna.

• Increase the separation between the equipment and the receiver.

• Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Warning: If a shielded-type power cord is supplied with this monitor, it is required in order to meet

FCC emission limits and to prevent interference with nearby radio and television

reception. Only shielded cables should be used to connect I/O devices to this

equipment. You are cautioned that changes or modifications not expressly approved by

the party responsible for compliance could void your authority to operate the

equipment.

Declaracion CE

Este aparato corresponde con los requisitos EMC (Compatibilidad Electromagnetica),

y con la directiva de Bajo Voltaje.

PV722E Manual del Usuario

TCO'99

TCO99 compliant monitors must be compliant with TCO99 which is more stringent

than MPRII. The purchase of TCO99 compliant monitors contributes to reducing the

burden on the environment and also to the further development of environmentally

adapted electronics products.

Why do we have environmentally labelled computers? In many countries, environmental labelling has become an established method-for

encouraging the adaptation of goods and services to the environment. The main

problem, as far as computers and other electronics equipment are concerned, is that

environmentally harmful substances are used both in the products and during their

manufacture. Since it is not so far possible to satisfactorily recycle the majority of

electronics equipment, most of these potentially damaging substances sooner or later

enter nature.

There are also other characteristics of a computer, such as energy consumption levels,

that are important from the viewpoints of both the work (internal) and natural (external)

environments. Since all methods of electricity generation have a negative effect on the

environment (e.g. acidic and climate-influencing emissions, radioactive waste), it is vital

to save energy. Electronics equipment in offices is often left running continuously and

thereby consumes a lot of energy.

What does labelling involve? This product meets the requirements for the TCO'99 scheme which provides for

international and environmental labelling of personal computers. The labelling scheme

was developed as a joint effort by the TCO (The Swedish Confederation of

Professional Employees), Svenska Naturskyddsforeningen (The Swedish Society for

Nature Conservation) and Statens Energimyndighet (The Swedish National Energy

Administration).

Approval requirements cover a wide range of issues: environment, ergonomics,

usability, emission of electric and magnetic fields, energy consumption and electrical

and fire safety.

The environmental demands impose restrictions on the presence and use of heavy

metals, brominated and chlorinated flame retardants, CFCs (freons) and chlorinated

solvents, among other things. The product must be prepared for recycling and the

manufacturer is obliged to have an environmental policy which must be adhered to in

each country where the company implements its operational policy.

The energy requirements include a demand that the computer and/or display, after a

certain period of inactivity, shall reduce its power consumption to a lower level in one or

more stages. The length of time to reactivate the computer shall be reasonable for the

PV722E Manual del Usuario

user.

Labelled products must meet strict environmental demands, for example, in respect of

the reduction of electric and magnetic fields, physical and visual ergonomics and good

usability. Below you will find a brief summary of the environmental requirements met by

this product. The complete environmental criteria document may be ordered from:

TCO Development

SE-114 94 Stockholm, Sweden

Fax: +46 8 782 92 07

Email (Internet): development@tco.se

Current information regarding TCO'99 approved and labelled products may also be

obtained via the Internet, using the address: http://www.tco-info.com/

Environmental requirements

Flame retardants

Flame retardants are present in printed circuit boards, cables, wires, casings and

housings. There purpose is to prevent, or at least to delay the spread of fire. Up to 30%

of the plastic in a computer casing can consist of flame retardant substances. Most

flame retardants contain bromine or chloride, and those flame retardants are chemically

related to another group of environmental toxins, PCBs. Both the flame retardants

containing bromine or chloride and the PCBs are suspected of giving rise to severe

health effects, including reproductive damage in fish-eating birds and mammals, due to

the bio-accumulative* processes. Flame retardants have been found in human blood

and researchers fear that disturbances in foetus development may occur.

The relevant TCO'99 demand requires that plastic components weighing more than 25

grams must not contain flame retardants with organically bound bromine or chlorine.

Flame retardants are allowed in the printed circuit boards since no substitutes are

available.

Cadmium** Cadmium is present in rechargeable batteries and in the colour-generating layers of

certain computer displays. Cadmium damages the nervous system and is toxic in high

doses. The relevant TCO'99 requirement states that batteries, the colour-generating

layers of display screens and the electrical or electronics components must not contain

any cadmium.

Mercury** Mercury is sometimes found in batteries, relays and switches. It damages the nervous

system and is toxic in high doses. The relevant TCO'99 requirement states that

PV722E Manual del Usuario

batteries may not contain any mercury. It also demands that mercury is not present in

any of the electrical or electronics components associated with the labelled unit.

CFCs (freons) The relevant TCO'99 requirement states that neither CFCs nor HCFCs may be used

during the manufacture and assembly of the product. CFCs (freons) are sometimes

used for washing printed circuit boards. CFCs break down ozone and thereby damage

the ozone layer in the stratosphere, causing increased reception on earth of ultraviolet

light with e.g. increased risks of skin cancer (malignant melanoma) as a consequence.

Lead** Lead can be found in picture tubes, display screens, solders and capacitors. Lead

damages the nervous system and in higher doses, causes lead poisoning. The relevant

TCO'99 requirement permits the inclusion of lead since no replacement has yet been

developed.

*Bio-accumulative is defined as substances which accumulate within living organisms.

** Lead, Cadmium and Mercury are heavy metals which are Bio-accumulative.

Precauciones de Seguridad

Por favor, lea las siguientes instrucciones atentamente. Este manual le servira para

referencias en el futuro.

1. Para limpiar la pantalla del Monitor LCD asegurese de que el Monitor esta en modo apagado. Desenchufe el Monitor de su fuente de energia antes de limpiarlo.

Alejese del Monitor LCD y rocie la solucion limpiadora sobre un pano o gamuza.

Sin presionar demasiado limpie la pantalla con el pano o gamuza ligeramente

humedecido con la solucion.

2. No coloque su Monitor LCD cerca de la ventana. La exposicion del Monitor a lluvias, agua, humedad o luz solar lo danaran severamente.

3. No coloque objetos encima del cordon de senal del Monitor/PC. Asegurese de que el cordon esta colocado en un area fuera del transito o donde Ud no pueda pisarlo.

4. No presione la Pantalla LCD. La presion excesiva causara danos permanentes en la pantalla.

5. No mueva la tapa ni intente hacer el mantenimiento de esta unidad por Ud mismo. Podria asi eliminar su garantia. Todo mantenimiento debe ser realizado

unicamente por tecnicos autorizados.

PV722E Manual del Usuario

6. La Capacidad de almacenamiento del Monitor LCD esta entre el rango de los -20 y los +65 grados Celsios. Almacenando su Monitor LCD fuera de este rango

resultara en danos permanentes.

7. En caso que alguna situacion similar a las siguientes se presentara, inmediatamente desenchufe su Monitor y llame al tecnico autorizado.

 El cordon de alimentacion o de senal del Monitor-a-PC esta desgastado o

danado.

 Algun liquido ha caido dentro del Monitor, o el mismo ha sido expuesto a

lluvias.

 El Monitor ha caido o la caparazon ha sido danada.

8. Para el uso solamente con la fuente de alimentación:

 Fairway Electronic Co., Ltd. Type: VE50-1200

 FSP Electronic Co., Ltd. Type: FSP050-1AD101

 Linearity Electronic Co., Ltd. Type: LAD6019AB4

 Li Shin International Enterprise Corp. Type: LSE9901B1250

 Lien Chang Co., Ltd. Type: LCA01F

 Potrans Co., Ltd. Type: UP06081120

Datos tecnicos de seguridad son presentes en la etiqueta en la parte de atras

del monitor.

PV722E Manual del Usuario

Introduccion

Descripción del Producto

Felicitaciones por su compra de este monitor de nueva generación. Su Monitor LCD

incorpora la pantalla de alta calidad dentro de un módulo liviano. Tiene capacidad para

ahorrar energía y no emite rayos X.

Las características son:

1. 17" TFT Pantalla de Cristal Líquido

2. Amplio Ángulo de Visualización

3. Compatible con IBM VGA, VESA

4. Ingreso RGB directo

5. Ingreso DVI

6. SXGA 1280x1024 resolución

7. Diseño compacto de peso liviano, menor a 7,5Kg

8. Compatible DPMS (ahorro de energía)

9. Fuente de energía de adaptación Universal

10. Pantalla Anti-resplandor

11. Controles y ajustes del Desplegador en Pantalla (OSD)

12. Hub de USB incluído

13. Altoparlante de Alta Calidad

Presentación del Empaque

El paquete de su monitor contiene:

PV722E Manual del Usuario

Monitor LCD

Manual del Usuario

Cable de Energía

Adaptador de Corriente

D-Sub 15 Cable de seàal VGA

Cable de DVI

Hub de USB

3,5 mm Cable de audio

Altoparlante externo

PRECAUCION:Conserve la caja de embarque en caso que necesite almacenar o transportar esta

unidad. Torne el LCD para que descanse sobre su cara anterior, cuando lo coloca dentro de la caja.

Instalación y Removement

PV722E Manual del Usuario

1-1. Instalando el retrato

1-2. Quite el retrato

PV722E Manual del Usuario

2-1. Gire al modo "Landscape" (Paisaje) (orientación horizontal).

3-1. Instalando Dispositivo de Conexión conforme a VESA* Este producto provee hoyos de tornillo cuadrado que se conforman a la interfaz de

conexión conforme a VESA de 100mm*100mm.

* El usuario mismo debe preparar el dispositivo de conexión para la norma VESA.

PV722E Manual del Usuario

4-1 Altoparlante externo installieren

5-1. Instalar Hub de USB

6-1.Ranura de la seguridad de Kensington (Kensington security slot)

+ 26 hidden pages