CTX PR711FL User Manual

PR711FL User’s Manual

User’s Manual

PR711FL

1

PR711FL User’s Manual

Table of Contents

1. Safety Instructions 3

2. Recommendation for Optimum Performance 5

3. Introduction 6

4. Installation 7

5. Controls and Adjustments 9

6. Trouble Shooting 14

7. Energy Declaration 18

8. Specification 19

9. Reference Information 20

2

PR711FL User’s Manual

Safety Instructions

FCC Statement

This equipment has been tested to comply with the limits for a class B digital device, pursuant

to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment generates, uses and can

radiate radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception, which can be determined by turning

the equipment off and on, the user is encouraged to try to correct the interference by one or

more of the following measures:

• Relocate the receiving antenna.

• Increase the separation between the equipment and the receiver.

• Connect the equipment into an outlet on a circuit different from that to which

the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Warning:

If a shielded-type power cord is supplied with this monitor, it is required in order to meet FCC

emission limits and to prevent interference with nearby radio and television reception. Only

shielded cables should be used to connect I/O devices to this equipment. You are cautioned

that changes or modifications not expressly approved by the party responsible for compliance

could void your authority to operate the equipment.

CE Statement

This device complies with the requirements of EMC (Electromagnetic Compatibility), and with

Low Voltage directive.

Safety Precautions

Always observe these important safety instructions:

1. Allow adequate ventilation around the monitor so that heat can be dissipated properly. Do

not block or cover ventilated openings. Do not place the monitor in an enclosure that will

obstruct the free flow of air.

3

PR711FL User’s Manual

2. Do not place the monitor or other heavy objects on the power cord. A damaged power cord

can cause fires or electrical shock.

3. Keep the monitor away from high-capacity transformers, electric motors and other strong

magnetic fields.

4. Do not connect to any voltage or frequency beyond the range specified on the back of the

monitor. Please follow all warnings and instructions marked on the product.

5. Unplug the monitor from the electrical power source before cleaning any part of the monitor.

Do not use liquids, sprays or aerosol cleaners. Clean the surface of the screen with a lint-free,

non-abrasive cloth and a non-alcohol, neutral and non-abrasive cleaning solution or glass

cleaner. Use a slightly dampened cloth to clean the exterior of the plastic cabinet.

6. This product is equipped with a 3-wire grounding-type plug, an important safety feature. This

plug will only fit into a grounding-type power outlet. If a grounding-type power outlet is not

available, have one installed by a qualified electrician. Do not cut off the grounding pin in order

to make the plug fit into an inappropriate power outlet.

7. For 230VAC operation, a power cord with tandem blade plug is required. Select your power

cord in accordance with the safety regulations of your country. For example

North America UL listed and CSA certified

Germany VDE certified

Nordic Countries SEMKO, NEMKO, DEMKO, or FIMKO certified

8. Do not attempt to service this product yourself! Opening or removing covers may expose

you to dangerous voltage points or other risks. Refer all servicing to qualified service

personnel.

9. The plug on the power cord is intended to serve as the disconnect device. The socket-outlet

should be installed near the equipment and should be easily accessible.

Notice : Actual safety specifications please refer to the label on the back of monitor.

4

PR711FL User’s Manual

Recommendation for Optimum Performance

Your monitor will provide the best results if you follow these recommendations:

1. Do not use your monitor against a bright background or where sunlight or other light sources

will shine directly on the screen.

2. Place the monitor just below eye level (10° -15°) for optimum viewing.

3. Set the monitor brightness level to match the ambient room light.

4. For optimum focus, the contrast control should not be set to the maximum unless the input

signal level is extremely low. Also, the brightness control should be set to a point where the

overall background area just begins to disappear.

CAUTION

• Do not scrap or knock the surface of CRT with a pen, a screwdriver and so on.

• Clean the CRT surface with a lint-free, nonabrasive, soft cloth, and should not

use the solution or glass cleaner containing corpuscles like an abrasive,

alcohol and an alkaline solution.

5

PR711FL User’s Manual

Introduction

The monitor is a multiple frequency high-resolution color monitor for IBM compatible PC's or

Macintosh and workstation systems. The monitor is equipped with microprocessor based

intelligence and multiple frequency scanning capability, allowing it to provide maximum

compatibility for various system platforms.

The monitor uses the latest screen technology including a 0.24mm AG FD Trinitron® CRT to

display crisp text and vivid color graphics. The full-function digital control and On-Screen

Display (OSD) system provides easy adjustment of image geometry and color settings for

different display modes with the precision of a fixed frequency monitor.

The monitor also has full ergonomic features. In addition to the friendly controls and user

comfort features, the emission level of the electric and magnetic field is kept low to meet the

Swedish MPR II or TCO standards.

The monitor is also equipped with energy saving functions; it is compatible with the VESA

power saving standards.

6

Installation

Unpacking

Your color monitor package should contain the following items:

Color monitor with tilt/swivel base

PR711FL User’s Manual

System Setup

(with Signal cable)

Power cord

User's Guide / Driver CD

1. Turn off the system and all attached peripherals.

2. Carefully turn the monitor upside down.

7