CTX PR700, PR700T User Manual
A
w
PR
700/700T
User's Manual
CTX
Commitment To Excellence.
Federal Communications Commission (F.C.C.) Statement
This equipment has been tested and found to comply with the limits for a class
В digital device, pursuantto Part 15 of the FCC rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
о Relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Use only shielded cables or connect I/O devices to this equipment.
You are cautioned that changes or modifications not expressly approved by the
party responsible for compliance could void your authority to operate the
equipment.
C€
This device complies with requirement of EMC directive 89/336/EEC with regard
to Electromagnetic Compatibility, and 73/23/EEC and 93/68/EEC with regard
to Low Voltage directive.
° IBM PC, IBM PS/2, and VGA are registered trademarks of International Business Machines Corp.
Windows, DOS are registered trademarks of Microsoft Corp. Macintosh is a registered trademark of Apple
Computer Inc. ENERGY STAR is a U.S. registered mark. As an Energy Star Partner, we have determined
that this product meets the Energy Star guidelines for energy efficiency.
Copyright" 1998, Chuntex Electronic Co., Ltd. We reserve the right to make changes or improvements in the
product described in this manual without notice.
TABLE OF CONTENTS
SAFETY INSTRUCTIONS 2
INTRODUCTION 4
Package Contents 4
Installing or Removing the Tilt/Swivel Base 5
Feature Highlights 5
Maximum Compatibility 5
Latest Screen Technology 5
Ergonomics concerned 6
Instant Power Saving Solution 6
Specifications 6
Recommended Use of the Monitor 7
CONTROLS AND ADJUSTMENTS 8
Front User Controls 8
"Picture" Menu 9
"Status" Menu 10
"Color" Menu 11
Contrast and brightness control 11
Exit Switch 11
Energy Declaration 12
TECHNICAL INFORMATION 12
Compatibility 12
Pin Assignment Table 12
Preset Timing Chart 13
TROUBLESHOOTING 14
DIMENSION/ABMESSUNGEN/DIMENSION 43
PLUG & PLAY: DISPLAY DATA CHANNEL (DDC) 44
MANUFACTURER'S LIMITED WARRANTY 45
1
• • •
SAFETY INSTRUCTIONS
1. Please read carefully all of these instructions below and keep the manual
for later use.
2. Please install the swivel base below this product before it comes into
use.
3. The voltage ratings and the rated frequency are on the overlay centered
at rear side of this product. Do not connect with any source of other
voltage or frequency and please follow all warnings and instructions
marked on the product.
4. Unplug this product from the wall outlet before cleaning and use a
damp cloth to clean it. Do not use liquid cleaners or aerosol cleaners.
5. Do not expose this product to rain or moisture.
6. Do not place this product on an unstable cart, stand, or table. The
product may fall, causing serious damage to the product.
7. Do notblock or cover ventilating openings with cloth or other material.
Neither should this product be placed near or over a radiator or a heat
register, nor should the product be placed in a built-in installation
unless proper ventilation is provided.
8. This product is equipped with a 3-wire grounding type plug. This plug
will only fit into a grounding-type power outlet. This is a safety feature.
If you are unable to insert the plug into the outlet, contact your
electrician to replace your obsolete outlet. Do not defeat the safety
purpose of the grounding-type plug. Choose a Tandem Blade
attachment plug configuration power cord for 230V AC input.
Due to the safety requirements of different
areas,
please select a suitable
power cord according to the following rules, in addition to the electric
rating:
A. Northern America area: Please select a UL listed and CSA certified
power cord.
B. Germany: Please select a VDE certified power cord.
C. Nordic countries: Please select a power cord certified by SEMKO,
NEMKO, DEMKO or FIMKO.
D. The other areas: Please select a power cord suitable to the local
power system and power outlet.
о
• •
SAFETY INSTRUCTIONS
Usually a suitable power cord is provided by the manufacturer, while
this product is sold. However, this product is sometimes, resold or
transported to another area of different power system and safety
requirements, please pay attention to the selection of a suitable power
cord.
The plug on the power cord is intended to serve as the disconnect
device, the scoket-outlet shall be installed near the equipment and
shall be easily accessible.
9. Do not allow anything to rest on the power cord. Do not locate this
product where persons will walk on the cord.
10. Never push objects of any kind into this product through cabinet slots
as they may touch dangerous voltage points or short out parts that
could result in a risk of fire or electric shock. Never spill liquid of any
kind on the product.
11. Do not attempt to service this product yourself, as opening or removing
covers may expose you to dangerous voltage points or other risk. Refer
all servicing to service personnel.
12. Unplug this product from the wall outlet and refer servicing to qualified
service personnel under the following conditions.
A. When the power cord or plug is damaged or frayed.
B. If liquid has been spilled into the product.
C. If the product has been exposed to rain or water.
D. If the product does not operate normally, when the operating
instructions are followed, adjust only those controls that are covered
by the operating instructions since improper adjustment of other
controls may result in damage and will often require extensive work
by a qualified technician to restore the product to normal operation.
E. If the product has been dropped or the cabinet has been damaged.
F. If the product exhibits a distinct change in performance, indicating
a need for service.
3
• • •