English8188
♦♦♦
1
English
Table of Contents
Safety Instructions ...................................................................................2
Section 1 Introduction........................................................................... 4
1.1 Contents of the Package ................................................................... 4
1.2 Removing or Installing the Tilt/Swivel Base..................................... 5
1.3 Feature Highlights ............................................................................ 5
1.4 Specifications .................................................................................... 6
1.5 Recommended Use of the Monitor.................................................. 7
Section 2 Installation............................................................................. 8
2.1 Pin Assignment Table....................................................................... 8
2.2 Preset Timing Chart .......................................................................... 9
Section 3 Controls and Adjustments ................................................ 10
3.1 Front User Controls. ....................................................................... 10
3.2 How to Use ON-Screen Adjustment.............................................. 11
3.3 Energy Declaration ......................................................................... 13
Section 4 Trouble-Shooting ................................................................ 13
Appendix/Anhang/Appendice
A. Dimension/Abmessungen/Dimension ............................................ 43
B. Plug & Play: Display Data Channel (DDC).................................. 44
Manufacturer's Limited Warranty. ................................................. 45
.
♦♦♦
2
English
1. Please read carefully all of these instructions below and keep the manual
for later use.
2. Please install the swivel base below this product before it comes into use.
3. The voltage ratings and the rated frequency are on the overlay centered at
rear side of this product. Do not connect with any source of other voltage
or frequency and please follow all warnings and instructions marked on
the product.
4. Unplug this product from the wall outlet before cleaning and use a damp
cloth to clean it. Do not use liquid cleaners or aerosol cleaners.
5. Do not expose this product to rain or moisture.
6. Do not place this product on an unstable cart, stand, or table. The product
may fall, causing serious damage to the product.
7. Do not block or cover ventilating openings with cloth or other material.
Neither should this product be placed near or over a radiator or a heat
register, nor should the product be placed in a built-in installation unless
proper ventilation is provided.
8. This product is equipped with a 3-wire grounding type plug. This plug
will only fit into a grounding-type power outlet. This is a safety feature.
If you are unable to insert the plug into the outlet, contact your electrician
to replace your obsolete outlet. Do not defeat the safety purpose of the
grounding-type plug. Choose a Tandem Blade attachment plug
configuration power cord for 230V AC input.
Due to the safety requirements of different areas, please select a suitable
power cord according to the following rules, in addition to the electric
rating:
A. Northern America area: Please select a UL listed and CSA certified
power cord.
B. Germany: Please select a VDE certified power cord.
C. Nordic countries: Please select a power cord certified by SEMKO,
NEMKO, DEMKO or FIMKO.
D. The other areas: Please select a power cord suitable to the local power
system and power outlet.
SAFETY INSTRUCTIONS
English8388
♦♦♦
3
English
Usually a suitable power cord is provided by the manufacturer, while this
product is sold. However, this product is sometimes, resold or transported
to another area of different power system and safety requirements, please
pay attention to the selection of a suitable power cord.
The plug on the power cord is intended to serve as the disconnect device,
the scoket-outlet shall be installed near the equipment and shall be easily
accessible.
9. Do not allow anything to rest on the power cord. Do not locate this
product where persons will walk on the cord.
10. Never push objects of any kind into this product through cabinet slots as
they may touch dangerous voltage points or short out parts that could
result in a risk of fire or electric shock. Never spill liquid of any kind on
the product.
11. Do not attempt to service this product yourself, as opening or removing
covers may expose you to dangerous voltage points or other risk. Refer
all servicing to service personnel.
12. Unplug this product from the wall outlet and refer servicing to qualified
service personnel under the following conditions.
A. When the power cord or plug is damaged or frayed.
B. If liquid has been spilled into the product.
C. If the product has been exposed to rain or water.
D. If the product does not operate normally, when the operating
instructions are followed, adjust only those controls that are covered
by the operating instructions since improper adjustment of other
controls may result in damage and will often require extensive work
by a qualified technician to restore the product to normal operation.
E. If the product has been dropped or the cabinet has been damaged.
F. If the product exhibits a distinct change in performance, indicating a
need for service.
♦♦♦
4
English
USER'S MANUAL
BENUTZERHANDBUCH
Manuel de l'utlisateur
1569UA/1569UE
1.1 Contents of the Package
The following lists all of the items included in your color monitor package,
please save the original box and packing materials for future transportation
or shipment of this monitor.
1. The color monitor with tilt/swivel base
2. Power cord
3. User's manual
Rear View Front View
Power Cord
User's Manual
Section 1 Introduction
The monitor is a multiple frequency high resolution color monitor for IBM
compatible, Macintosh family and workstation systems. The monitor is
equipped with microprocessor based intelligence and multiple frequency scanning capability, allowing it to provide maximum compatibility for various
kinds of graphic system hardwares.
The monitor is designed with the latest screen technology including a 0.25mm
Aperture Grille CRT to display crisp text and vivid color graphics with max.
resolution up to 1280 x 1024, and supports VESA 85Hz modes to provide flickerfree picture. The full function digital control and On-Screen Display system
provides easy adjustment of image geometry and color for different display modes
with the precision of a fixed frequency monitor.
The design of the monitor is also ergonomics concerned, in addition to the friendly
controls and user comfort features, the emission level of electric and magnetic
field is kept low to meet the Swedish MPR II(PR500) standard or TCO(PR500T)
standard.
The monitor is also equipped with energy saving function, it is compatible with
VESA power saving proposal, the lowest power consumption is less than 8 W.
English8588
♦♦♦
5
English
1.2 Removing or Installing the Tilt/Swivel Base
1. Turn off the system and all attached options.
2. Carefully set the display upside down.
Remove the Tilt/Swivel Base
1. Squeeze and hold the latches.
2. Pull the Tilt/Swivel Base to the rear of the display and
lift to remove the base.
Install
Remove
Install the Tilt/Swivel Base
1. Align the base with the slots in the bottom of the
display and insert the Tilt/Swivel Base into the
slots.
2. Push the Tilt/Swivel Base firmly toward the front
of the display until the latches click into the locked
position.
* with optional adapter
1.3 Feature Highlights
Maximum Compatibility
• Automatically scans all horizontal frequencies between 30 KHz and 70
KHz, and all vertical frequencies between 50 Hz and 160 Hz.
• Supports multiple operating platforms such as IBM compatible,
Macintosh* family.
• Maximum compatibility 640 x 480/130Hz, 800 x 600/110Hz, 1024 x 768/85Hz,
1280 x 1024/66Hz.
• Supports wide range of graphics standards including VGA, super VGA,
XGA, Mac II 13" (640 x 480), Mac 16" (832 x 624), Mac 21" (1152 x
870), all VESA standards.
Latest Screen Technology
• 0.25 mm Aperture Grille 38.1cm/15 inches CRT increases the clarity and
displays greater detail.
• Special anti-reflection, anti-glare and anti-static coating of the screen
face provides better focus, contrast and color performance.
• Dark tint tube to provide the high contrast performance.
• Built-in dynamic focus to provide better legibility and clear image.
• Flat and square screen reduces image distortion and glare.
• Full feature digital control and multi-lingual OSD system allows easy
adjustment of geometry and color. Besides the monitor provides even
trapezoid, parallelogram, pin-corner, pin-balance and rotation adjustments
for user to finely tune the picture image.
Loading...