CTX p772L User Manual

User's Manual

P772L LCD Monitor

Federal Communications Commission (F.C.C.) Statement

This equipment has been tested and found to comply with the limits for a class B digital
device, pursuant to Part 15 of the FCC rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:

• Relocate the receiving antenna.

• Increase the distance between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that which the receiver
is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Use only shielded cables or connect I/O devices to this equipment.
You are cautioned that changes or modifications not expressly approved by the party
responsible for compliance could void your authority to operate the equipment.

Copyright

This publication including all photographs, illustrations and software, is protected under
international copyright laws, with all rights reserved. Neither this manual nor any of the
material contained herein may be reproduced without the express written consent of the
manufacturer.

Disclaimer

The information in this document is subject to change without notice. The manufacturer
makes no representations or warranties with respect to the contents here of merchantability
or fitness for any particular purpose. Further, the manufacturer reserves the right to revise
this publication ad to make changes from time to time in the content hereof without
obligation of the manufacturer to notify any person of such revision or changes.

Trademark Recognition

Microsoft, MS-DOS, and Windows are registered trademarks of Microsoft Corp. Intel,
Pentium, and Pentium II are register trademarks of Intel Corporation. IBM, PC/AT, VGA,
OS/2, and PS/2 are registered trademarks of international Business Machines. Macintosh
II Family, LC, LCII, Quandra, and Power Macintosh are registered trademarks of Apply
Computer, Inc. VESA is a registered trademark of the Video Electronics Standards
Association. DPMS and DDC are trademarks of VESA. The ENERGY STAR name is a
registered mark of the U.S. EnvironmentalProtection Agency. Other product names used
in this manual are the properties of their respective owners and acknowledged.

♦♦♦

i

Congratulations!

The display you have just purchased carries the TCO'03
Displays label. This means that your display is designed,
manufactured and tested according to some of the strictest
quality and environmental requirements in the world. This
makes for a high performance product, designed with the
user in focus that also minimizes the impact on our natural
environment.

Some of the features of the TCO'03 Display requirements:

Ergonomics

• Good visual ergonomics and image quality in order to improve the working
environment for the user and to reduce sight and strain problems. Important
parameters are luminance, contrast, resolution, reflectance, colour rendition and
image stability.

Energy

• Energy-saving mode after a certain time–beneficial both for the user and the

environment

• Electrical safety

Emissions

• Electromagnetic fields

• Noise emissions

Ecology

• The product must be prepared for recycling and the manufacturer must have a certified
environmental management system such as EMAS or ISO 14 001
Restrictions on

chlorinated and brominated flame retardants and polymers
heavy metals such as cadmium, mercury and lead.

The requirements included in this label have been developed by TCO Development in
cooperation with scientists, experts, users as well as manufacturers all over the world.
Since the end of the 1980s TCO has been involved in influencing the development of IT
equipment in a more user-friendly direction. Our labelling system started with displays
in 1992 and is now requested by users and IT-manufacturers all over the world.

For more information, please visit

www.tcode velopment.com

ii

♦♦♦

TABLE OF CONTENTS

IMPORTANT SAFETY INSTRUCTIONS .............................................................. 2

INTRODUCTION ............................................................................................... 3

Product Description ................................................................................... 3

Package Overview ...................................................................................... 3

Installation of the Monitor Arm .................................................................. 4

Recommended Use of the Monitor ............................................................. 5

LCD Monitor Base Installation Guide ......................................................... 6

Guidelines for Operating the Viewing Angle of LCD Monitor .................... 7

CONTROLS AND ADJUSTMENTS ...................................................................... 8

Front User Controls. ................................................................................... 8

OSD Directly Adjustment ........................................................................... 9

Brightness............................................................................................ 9

Contrast ............................................................................................... 9

Audio .................................................................................................. 9

OSD Main menu ......................................................................................... 9

Volume ............................................................................................... 9

Auto-Tune ......................................................................................... 10

Color ................................................................................................. 11

Image ............ Clock/Phase/Image Position/Smooth .......................... 12

Language ........................................................................................... 13

OSD Position .................................................................................... 13

Reset ................................................................................................. 13

Energy Declaration ................................................................................... 14

TROUBLESHOOTING ...................................................................................... 15

TECHNICAL INFORMATION ........................................................................... 16

Compatibility ............................................................................................ 16

Pin Assignment.................................................................................. 16

Preset Modes ..................................................................................... 16

Other Modes ..................................................................................... 16

Specification ............................................................................................. 17

English

1

♦♦♦

IMPORTANT SAFETY INSTRUCTIONS

Please read the following instructions carefully. This manual should be retained

English

for future reference.

1. To clean the LCD Monitor screen make sure the Monitor is in the power off
mode. Unplug the Monitor from its power source before cleaning it. Stand
away from the LCD Monitor and spray cleaning solution onto a rag. Without
applying excessive pressure clean the screen with the slightly dampened rag.

2. Do not place your LCD Monitor near a window. Exposing the Monitor to
rain, water, moisture or sunlight can severely damage it.

3. Do not place anything on top of the Monitor/PC signal cord. Make sure the
cord is placed in an area where it will not be stepped on.

4. Do not apply pressure to the LCD screen. Excessive pressure may cause
permanent damage to the display.

5. Do not remove the cover or attempt to service this unit by yourself. You may
void the warranty. Servicing of any nature should be performed only by an
authorized technician.

6. Safe storage of the LCD Monitor is in a range of minus 20 to plus 60 degrees
Celsius. Storing your LCD Monitor outside this range could result in permanent
damage.

7. If any of the following occurs immediately unplug your Monitor and call an
authorized technician.

• The power or Monitor-to-PC signal cord is frayed or damaged.

• Liquid has been spilled into the Monitor, or it has been exposed to rain.

• The Monitor has been dropped or the case has been damaged.

Notice :

Actual safety specifications please refer to the label on the back of monitor.

2

♦♦♦

INTRODUCTION

Product Description

Congratulations on purchasing this new generation monitor. Your LCD monitor
incorporates high quality display into a small light-weight module. It has power-saving
capabilities and emits no X-ray radiation.

The features are:

• 17" TFT Liquid Crystal Display

• Compatible with IBM VGA, VESA

• Direct RGB input

• SXGA 1280x1024 resolution, up to 16M colors

• Lightweight compact design, weighting less than 6.6 Kgs

• DPMS (power saving) Compatible

• Built in universal power supply

• Anti-glare display

• On-Screen Display (OSD) controls and adjustments

• 1W x2 Audio function inside the monitor

• Audio volume adjustment by OSD

Package Overview

Your monitor package contains:

English

Audio CableRGB Cable

LCD Monitor

Power Cord

CAUTION

Keep the shipping carton in case the need arises to store or transport the unit. Let the

LCD lie on its face when you put it into the carton.

User's Manual

3

♦♦♦