CTS WPS-3005 User Manual

Innovation to Your Needs

WPS-3005 Series Lite Industrial Ethernet Switch

4 Ports 10/100/1000Base-T and 1 Port

1000Base-X Gigabit Ethernet Switch with

Built-in IEEE 802.3at/af PoE/PSE Feature and

Extended Operating Temperature

Description

Connection Technology Systems (CTS) WPS-3005 series
are 4 ports Gigabit Ethernet 10/100/1000Base-T with
1000Base-X Ethernet switches. The WPS-3005 series Ether­net switch converts traditional twisted-pair RJ45 cable into
various ber media including multi-mode, single-mode,
SC connector, bi-directional WDM, or a SFP slot for

Features

▪

Power Redundancy over DC Input by DC Jack and Terminal
Blocks

Support power redundancy over DC input to keep the

healthy network connection without power outage risk.

▪9K Bytes Jumbo Frame Size

Support jumbo frame size 9K bytes to ease the network

trac loading and facilitate IPTV service.

DIN-Rail/Wall Mounting Installation Type

▪

Support both DIN-Rail and wall mounting types to facilitate

installation exibility for general industrial applications.

▪Operating Temperature -20℃ ~ 60℃

Support extended operating temperature to guarantee the

reliability and stability in the critical environmental condi­tions.

▪IEEE 802.3at/af PoE/PSE

Support IEEE 802.3at/af PoE feature to feed power to remote
device and facilitate the deployment in the power unreach-

able application.

Target Applications

pluggable ber transceivers. The traditional transmission
distance of 100m over RJ45 copper can be extended from
550m to 80km over ber.

WPS-3005 series Ethernet switch adopts the brand new ID
appearance as well as the well considered designs for the
demand of dierent customer segments. The exible
power options have either DC power or AC/DC power
adaptor to fulll most of practical deployment scenarios.
The extended operating temperature of WPS-3005 Ether­net switch is from -20℃ to 60 ℃ which enables users to
install the equipment under critical environment without
reliable and stable concerns. It is especially designed for
network operators, metro Ethernet providers, enterprise,
SMB customer segment, who have the need of implement­ing ber optical Ethernet networks over long distance for
point-to-point ber connection with the demand of wide
operating temperature, and are looking for an eortless
and robust gigabit switch.

WPS-3005 series Ethernet switch is fully compliant with
IEEE 802.3, 802.3u, 802.3ab & 802.3z standards. Besides,
the user can connect another switch or NIC through the
10/100/1000Base-T twisted-part RJ-45 port of WPS-3005
series Ethernet switch without crossover cables needed
and monitor the status through comprehensive LED
display.

WPS-30 0 5Switch

▪Point-to-point ber connection for long distance which

requires reliable and stable link under critical environmental
condition of general industrial application.

DS_W016_WPS-3005_A02

WPS-3005 series Ethernet switch has built in PoE/PSE
feature which complies to IEEE802.3at/af standard. With
PoE/PSE enabled feature, WPS-3005 can signicantly solve
the installation obstacle for the user in the power unreach­able situation. It can actively feed power to the remote
equipment which cannot have the power source available
and simply facilitate the user applications to be deployed
smoothly.

www.ctsystem.com

Innovation to Your Needs

Application Diagram

WPS-30 0 5Switch

Specication

Interface

TP Port
Shielded 10/100/1000Base-T PoE RJ45 x 4
F/O Port
1000Base-X x 1

Standards

IEEE 802.3 10Base-T
IEEE 802.3u 100Base-TX
IEEE 802.3ab 1000Base-T
IEEE 802.3z 1000Base-X
IEEE 802.3x Flow Control
IEEE 802.3af Power over Ethernet
IEEE 802.3at Power over Ethernet Enhancements

H/W Specication

Auto-Negotiation in TX ports
MDI/MDIX Auto-Crossover Supported
Support Full/Half Duplex Mode Operation
2K MAC Address Table
128K Bytes Memory Buer
10Gbps Non-Blocking Switching Fabric

LED

PWR, PW T1, PW T2, F/O,Link/ACT,
PWR/Port Status,
Link/ACT/Speed, PoE

Ethernet Features

Support 9K Bytes Jumbo Frames
Support Flow Control
Store and Forward Switching Mechanism

Installation Type

Wall Mounting
DIN Rail Mounting

Power Requirement

DC Input
DC Power Jack x 1
Terminal Block x 2
Input Voltage: 48VDC

Power Consumption:

4.2W (Max. without PoE Operation)
130W (Max. with PoE+ Full Loading)

Environmental Condition

Operation: -20° ~ 60℃
Storage Temperature: -20° ~ 70℃
Humidity: 5% ~ 90%, non-condensing

Dimension & Weight

Size: 61x93x105 mm (WxDxH)
Weight: 0.45kg

EMC/Safety

FCC Part 15 Class A, CE

DS_W016_WPS-3005_A02

www.ctsystem.com