CTS MCT-2612 SERIES User Manual

Trademarks

CTS is a registered trademark of Connection Technology Systems Inc. Contents subject to revision without prior notice.

All other trademarks remain the property of their owners.

any way whatsoever unless prior consent has been obtained from Connection Technology Systems Inc.

FCC Warning

The MCT-2612 Series converters have been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These standards are designed to provide reasonable protection against harmful interference when these devices are operated in a commercial environment. These devices generate, use, and can radiate radio frequency energy and may cause harmful interference to radio communications unless installed in accordance with this

User’s Guide. Operation of these devices in a residential area

is likely to cause harmful interference which will make the user responsible for the appropriate remedial action at his / her own expense.

CE Mark Warning

These are Class A products. In a domestic environment these products may cause radio interference in which case the user will need to consider adequate preventative methods.

1. Checklist

The package should contain the following items:

MCT-2612 Converter

AC-DC Power Adapter

User’s Guide

Please notify your sales representative immediately if any items are missing or damaged.

2. Overview

The MCT-2612 series media converter converts traditional twisted-pair RJ-45 cable into various fiber media including multi-mode, single-mode, SC connector, bi-directional WDM, or a SFP slot for pluggable fiber transceiver, extending transmission distance for the deployment to the household, apartment or campus.

MCT-2612 series media converter is fully compliant with IEEE

802.3, 802.3u standards. Besides, it is equipped with some switching features including store and forward. Operation status can be locally monitored through a set of Diagnostic LED located in the front panel.

Major Features:

Auto-Negotiation in TP port

MDI/MDIX Auto-Crossover supported

Support Link Alarm

Support Jumbo Frame 9K bytes

Store and Forward Switching Mechanism

Support Auto & Force mode configuration

3. Installation

Attach fiber cable from the MCT-2612 to the fiber network. The fiber connections must be matched – transmit socket to receive socket.

Attach a UTP cable from the 10/100BASE-T network to the RJ-45 port on the MCT-2612.

Connect the power adapter to the MCT-2612 and check that the PWR/STA LED lights up. The TP and F/O LEDs will light up when all the cable connections are satisfactory.

Figure 1. MCT-2612 Dual Fiber Front Panel

Figure 2. MCT-2612 WDM & SFP Front Panel

Figure 3. MCT-2612 Converter Rear Panel

Figure 4. MCT-2612 Converter Side Panel

4. DIP SWITCH Setting

The default settings for PIN 1 & 2 are ON. The other PINs are OFF.

Pin NO.

Function

OFF

TP Auto-Negotiation

Disable

Enable

Manual TP speed

10M

100M 3 N/A

N/A

N/A 4 N/A

N/A

N/A 5 N/A

N/A

N/A 6 N/A

N/A

N/A 7 Link Alarm

Disable

Enable

Config from DIP/Soft

Soft

DIP

NOTE:

1. Before changing TP speed, please make sure PIN 1 is set to OFF.

5. LED Description

6. Technical Specifications

Standards:

IEEE 802.3, 802.3u

Interface:

1 X RJ-45 connector 1 X F/O port or SFP Slot

LED:

Power/Status, FDX, Speed, F/O, TP

Power:

I/P AC 100-240V O/P DC 3.3V

Power Consumption:

2.1W

Weight:

0.1Kg

Dimensions:

51mm(W)X74mm(D)X20mm(H)

Temperature:

Operating: 0o~50oC Storage: -20o~60oC

Humidity:

5%~90% RH

Certification:

FCC/CE Class A

EIA/TIA-568 CAT 5e, 1000M

Fiber

50/125, 62.5/125um multi-mode fiber 9/125, 10/125um single-mode fiber

Fiber Transceiver Information

100M Multi-Mode

TYPE

BTFC

BTFT

Connector Type

Wavelength

1310nm

Typical Distance

2 Km

Min TX PWR

-20.0dBm

Max TX PWR

-14.0dBm

Sensitivity

-31.0dBm

Link Budget

11.0dB

Single-Mode

TYPE

BTFC

(SM-10)

BTFC

(SM-20)

BTFC

(SM-30)

BTFC

(SM-50)

BTFC

(SM-60)

BTFC

(SM-80)

Connector

Type

Wavelength

1310nm

Typical

Distance

10 Km

20 Km

30 Km

50 Km

60 Km

80 Km

Min TX

PWR

-15.0dBm

-5.0dBm

0dBm

Max TX

PWR

-8.0dBm

0dBm

5.0dBm

Sensitivity

-34.0dBm

-35.0dBm

-36.0dBm

Link Budget

19.0dB

30.0dB

36.0dB

2 Wave-Length WDM

TYPE

W2A

(SM-20)

W2B

(SM-20)

W2A

(SM-40)

W2B

(SM-40)

W2A

(SM-60)

W2B

(SM-60)

Connector

Type

Wavelength

(Tx/Rx)

1310nm/ 1550nm

1550nm/ 1310nm

1310nm/ 1550nm

1550nm/ 1310nm

1310nm/ 1550nm

1550nm/ 1310nm

Typical

Distance

20 Km

40 Km

60 Km

Min TX

PWR

-14.0dBm

-8.0dBm

-5.0dBm

Max TX

PWR

-8.0dBm

0 dBm

0dBm

Sensitivity

-31.0dBm

-34.0dBm

-33.0dBm

Link Budget

17.0dB

26.0dB

28.0dB

NOTE: Specifications may change without prior notice.

MCT-2612 SERIES

10/100BASE-T to

100BASE-X

Managed Media Converter

User’s Guide

Version 0.90

Contact Information

 Connection Technology Systems INC (CTS)

18F-6, No.79, Sec.1, Xintai 5th Rd., Xizhi Dist., New Taipei City 221, TAIWAN, R.O.C. TEL: +886 2 26989661 FAX: +886 2 26989662 E-Mail: info@ctsystem.com

LED

Color

Function

PWR/STA

Off

Power is not ready

Green

Lit when power is available.

Orange

Lit when power is being booted up. Blink when new firmware is detected and is available .

Green

Orange

Blinking

Firmware upgrade is currently processing when the LED blinks green & orange in turn.

Off

The TP port is link down.

Green

Lit when TP cable connection with remote device is good. Blink when TP traffic is present.

F/O

Off

The fiber port is link down.

Green

Lit when Fiber cable connection at 100M with remote device is good. Blink when F/O traffic is present.

FDX

Off

TP works in Half-Duplex.

Green

Lit when TP works in Full-Duplex.

SPD

Off

The TP port is link down.

Green

Lit when TP works in 10M. Lit when TP works in 100M.

CTS MCT-2612 SERIES User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual