CTS 335 Technical Data

Model 335
/
FEATURES
Standard 7x5mm Surface Mount Footprint
Differential LVPECL or LVDS Outputs
Frequency Range 19.44 – 212.50 MHz
Frequency Stability, ±50 ppm Standard
(± 25 ppm available)
+2.5Vdc or +3.3Vdc Operation
Operating Temperature to –40°C to +85°C
Output Enable Standard
Low Phase Jitter,
Tape & Reel Packaging
RoHS
Green Compliant
NON-Multiplied
DESCRIPTION
The Model 335 is a ceramic packaged Voltage Controlled oscillator offering reduced size and enhanced stability. The small size means it is perfect for any application. The enhanced stability means it is the perfect choice for today’s communications applications that require tight frequency control.
ORDERING INFORMATION
335
M
P = PECL, Enable High (standard) L = LVDS, Enable High (standard) E = PECL, Enable Low V = LVDS, Enable Low
OUTPUT TYPE FREQUENCY IN MHz
M - indicates MHz and decimal point. Frequency is recorded with minimum 4 significant digits to the right of the "M".
FREQUENCY STABILITY and APR SUPPLY VOLTAGE
5 = ± 25 ppm / ± 100 APR (3.3V only) 3 = ± 50 ppm / ± 50 APR (standard) 2 = ± 25 ppm / ± 50 APR
Example Part Number: 335P3C3155M5200
2 = 2.5 Vdc 3 = 3.3 Vdc
OPERATING TEMPERATURE RA NGE
C = 0°C to +70°C (standard) I = -40°C to +85°C
Document No. 008-0286-0 Page 1 - 5 Rev. A
٠ ٠ ٠ CTS Electronic Components, Inc. ٠ 171 Covington Drive ٠ Bloomingdale, IL 60108 ٠ ٠ ٠
www.ctscorp.com ٠ ٠ ٠
٠ ٠ ٠
V
(
)
V
V
V
V
V
V
V
V
R
V
V
V
R
ELECTRICAL CHARACTERISTICS
Maximum Supply Voltage Storage Temperature Frequency Range LVPECL and LVDS 19.44 - 212.50 Frequency Stability
See Note 1 and Ordering Information
Absolute Pull Range
(See Note 2 and Ordering Information)
Operating Temperature
Absolute Maximums
Commercial -20 70 Industrial -40 85 Supply Voltage
Supply Current LVPECL -5075 LVDS -2540 Control Voltage V Frequency Deviation f 25°C at Time of Shipment - 130 - ± ppm Linearity L Best Straight Line Fit -15 10 15 % Input Impedance Z Transfer Function - - - Positive - ­ Start Up Time Modulation Roll-off - @ -3dB 25 - - kHz Phase Jitter tjms Bandwidth 12 kHz - 20 MHz - - 1 ps RMS Enable Function High Enable Input Voltage Disable Input Voltage Enable Function Low Enable Input Voltage Disable Input Voltage Disable Current Enable Time
LVPECL WAVEFORM
Output Load Output Duty Cycle SYM
Electrical and Waveform Parameters
Output Voltage Levels Logic '1' Level Logic '0' Level Rise and Fall Time
LVDS WAVEFORM
Output Load Output Duty Cycle SYM @ 1.25V 45 - 55 % Differntial Voltage Output Voltage Levels Logic '1' Level Logic '0' Level Rise and Fall Time
Notes:
1.
Inclusive of initial tolerance at time of shipment, changes in supply voltage, load , temperature and 10 year ag ing at an average operating temperature of +40 °C.
2.
Minimum guaranteed frequency shift from fO over variations in temperature, aging, power supply and load at an average operating temperature of +40°C for 10 years.
PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNIT
Differential LVPECL or LVDS
CC
T
STG
f
O
f/f
O
APR - 50, 100 - - ± ppm
T
A
V
± 5 % V
CC
I
Maximum Load
CC
VCC = 3.3V 0.0 1.65 3.3 V
C
C
Application of V
T
S
Pin 2 Logic '1', Output Enabled
IH
Pin 2 Logic '0', Output Disabled - -
IL
Pin 2 Logic '0', Output Enabled
IH
Pin 2 Logic '1', Output Disabled
IL
I
Pin 1 or Pin 2 Logic '1' , Output Disabled - - 20 uA
IL
T
Pin 2 Logic '1' or Logic '0'
PLZ
R
L
OH
OL
T
, T
F
R
L
OD
OH
OL
, T
T
F
- 1.3V
@ V
CC
PECL Load PECL Load - ­@ 20% - 80% Levels 0.4 1.0 ns
RL = 100 Ohms 250 350 450 mV
LVDS Load - - 1.6 LVDS Load 0.9 - ­@ 20% - 80% Levels - 0.4 1.0 ns
- -0.5 - 5.0 V
- -55 - 125 °C
-
- - - 25, 50 ± ppm
C
2.38 2.5 2.63
3.14 3.3 3.47
-50--kOhms
CC
--50-Ohms
- - 100 - Ohms
-510ms
0.7*V
CC
0.3*V
CC
--10ms
45 - 55 %
- 1.025V
CC
Model 335
7x5mm VCXO
25
--V
0.3*V
CC
0.7*V
CC
--
- 1.62V
CC
MHz
mA
V
V
V
Document No. 008-0286-0 Page 2 - 5 Rev. A
٠ ٠ ٠ CTS Electronic Components, Inc. ٠ 171 Covington Drive ٠ Bloomingdale, IL 60108 ٠ ٠ ٠
Loading...
+ 3 hidden pages