CTI Products NCB-EL with Ethernet Interface User Manual

Network Combiner NCB/EL

Connectivity for Ethernet LANs & WANs

NCB­Etherlon
Network
Combiner



CTI Products, Inc.
1211 West Sharon Road
Cincinnati, Ohio 45240
USA

phone

+1.513.595.5900

fax

+1.513.595.5983

e-mail

[e-mail]

www.ctiproducts.com

Usage

The NCB-EL Network Combiner is a
member of CTI Product's growing family of
WON™ Wide Operating Network devices
that, when used in conjunction with an
Ethernet LAN & WAN, allows multiple

ONWORKS

L

® networks to be connected in
real time, using the Ethernet TCP/IP
network to extend the networks.

Features

• LonWorks Router for Ethernet - TCP/IP

• Connect multiple LonWorks networks

into a unified network using Ethernet
TCP/IP LAN/WAN Backbone

• Supports Unicast and Multicast IP

Addressing modes as well as Unicast­Replicated,

• L

ONWORKS

• Full L

Router technology

ONWORKS

system

interoperability is maintained.

• Supports all L

ONTALK

 protocol

message services.

• Configured with standard L

ONWORKS

network management tools.

• Subnet and group segmentation can

be used to maximize network
performance.

• Fully Interoperable Peer-to-Peer

Communication Via Ethernet
Backbone

• Any node can communicate with any

other node, regardless of the location
of each.

• No complex custom software to

write, debug, or maintain.
No system node application code

•

changes needed.

• Perform Remote System Diagnostics

Via Ethernet Backbone

• Remote Protocol Analysis

• Remote Network Installation

Updates (Bindings, etc.)

• Remote Code Download

• Built-in Ethernet Media Support:

• 10BaseT

• AUI

• Supports standard L

ONWORKS

transceivers:

• FTT10A, TP/XF78 & 1250, LPT-10

• SMX transceivers including power

line and RS485.

• Typical Applications:

• Building Automation

• HVAC

• Utilities

• Security & Access Control

• Industrial Automation

• Remote Monitoring/Control

• Remote Diagnostics

NCB-Etherlon

Network Combiner NCB/EL



NCB /EL

Power: 10 to 30 VDC (10Base-T only)

Size: 7.5" D x 5.6" W x 1.6" H

Mounting: Desktop with integral non-slip feet

Temperature: 0-60 ˚C

Humidity: 10-95% non-condensing

Listings: UL1459, CSA C22.2, EC EN60950

EMI: Complies with: FCC part 15 Class B,

EMC: Complies with EN50082-1 (European Union)

European: Carries the CE Mark

Transceivers Supported: FTT-10A, TPT/XF-78, TPT/XF-1250, SMX, RS485, PLT22

Ethernet Media & 10Base-T (twisted pair)RJ 45

Connections Supported: AUI 15-pin D-sub female (10Base5)

Network Transport: UDP/IP over 10 Mbps Ethernet

IP Addressing Modes: Unicast, Multicast and Unicast-Replicated,

Configuration: LonTalk Router set as a repeater by factory default. Bridge,

!!!!

Specifications: “Etherlon”

15 to 30 VDC (AUI)
Negative Ground, Externally Current Limited
6 watts max. without SMX transceiver
11 watts max. with SMX PowerLine transceiver
North American and International Power Supplies available.

Wall mount or 19" rack mount with optional adapters

Industry Canada (IC) Class B
EN55022 ,Class B (European Union)

Configured, or Learning type set using standard L
management tools capable of configuring routers. LNS plug-in provided
for configuration of IP parameters.

ONWORKS

network

CTI Products, Inc.
1211 W. Sharon Road, Cincinnati, OH 45240 USA
Phone: [phone] Fax: [phone]
Email: [e-mail]
Web: www.ctiproducts.com

Specifications subject to change without notice.

NCB, NCB-EL, NCB-Etherlon and WON are trademarks of CTI Products, Inc.

Echelon, LON, LNS, L
and Neuron are U.S. Registered trademarks of Echelon Corporation NCB-EL5

ONBUILDER

, LONT

ALK

, LONW

ORKS

, LonMark,