How it Works
CTI Products
Loading...
DC Distribution Panel
User Manual
9 pgs98 Kb0
Table of contents
Loading...

CTI Products DC Distribution Panel User Manual

Download
DC Distribution Panel
User Guide # S2-61256-100
68-11926-100
CTI Products, Inc. DC Distribution Panel User Guide
CUSTOMER REMEDIES. In the event of a defect, malfunction, or failure to conform to specifications established by the seller during the period shown, the customer shall call CTI Products, Inc. to obtain a Return Authorization Number and return the product or module, shipping and insurance prepaid. CTI Products, Inc., will then at its option, either repair or replace the product or module and return it, shipping prepaid, or refund the purchase price thereof. On-site labor at the purchaser's location is not included in this warranty.
EQUIPMENT NOT MANUFACTURED BY CTI Products, Inc. Equipment not manufactured by CTI Products, Inc. is excluded from this warranty, but is subject to the warranty provided by its manufacturer, a copy of which will be supplied to you upon specific written request.
NO OTHER WARRANTIES. The foregoing constitutes the sole and exclusive remedy of the buyer and exclusive liability of CTI Products, Inc., and is in lieu of any and all other warranties expressed or implied or statutory as to merchantability, fitness for purpose sold, description, quality, productiveness or any other matter.
NO LIABILITY FOR CONSEQUENTIAL DAMAGES. WITHOUT LIMITING THE FOREGOING, IN NO EVENT SHALL CTI PRODUCTS, INC. OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAG ES WHATSOEVER (INCLUDING, WITHOUT LIMITATION, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES OR FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION, OR OTHER PECUNIARY LOSS) ARISING OUT OF THE USE OF OR INABILITY TO USE CT I PRODUCTS, INC. EQUIPMENT BY PURCHASER OR OT HER THIRD PARTY, WHETHER UNDER THEOR Y OF CONTRACT, TORT (INCLUDING NEGLIGENCE), INDEMNITY, PRODUCT LIABILITY OR OTHERWISE, EVEN IF CTI PRODUCTS, INC. HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSSES. IN NO EV ENT SHALL CTI PRODUCTS, INC.’S, LIABILITY EXCEED THE TOTAL AMOUNT PAID BY PURCHASER FOR THE EQUIPMENT GIVING RISE TO SUCH LIABILITY.
CTI Products, Inc.
1211 W. Sharon Rd.
Cincinnati, OH 45240
If you have questions about this equipment, call us at:
(513) 595-5900. (8:30 to 5:00 Eastern)
Information contained in this document is subject to change without notice and does not represent a comm itme nt on the part of CTI Products, Inc.
Standard Limited Hardware Warranty
No part of this manual may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, for any purpose without the written permission of CTI Products, Inc.
Copyright 2006, CTI Products, Inc. All rights reserved.
MCN is a trademark of CTI Products, Inc. Other trademarks referenced are properties of their respective owners.
68-11926-100
CTI Products, Inc. DC Distribution Panel User Guide
TABLE OF CONTENTS
Quick-Start Guide Error! Bookmark not defined.
1. Introduction Error! Bookmark not defined.
W
HAT IS AN EXB?.............................................................................................ERROR! BOOKMARK NOT DEFINED.
R
EFERENCE DOCUMENTS ...................................................................................ERROR! BOOKMARK NOT DEFINED.
FRONT PANEL.....................................................................................................ERROR! BOOKMARK NOT DEFINED.
REAR PANEL.......................................................................................................ERROR! BOOKMARK NOT DEFINED.
2. IP Address Configuration Error! Bookmark not defined.
S
ELECTING THE ADDRESSING MODE ..................................................................ERROR! BOOKMARK NOT DEFINED.
IP SETTINGS WORKSHEET ..................................................................................ERROR! BOOKMARK NOT DEFINED.
STEP 1. INSTALL ETHERPLUG CONFIGURATION SOFTWARE ...............................ERROR! BOOKMARK NOT DEFINED.
S
TEP 2. START ETHERPLUG................................................................................ERROR! BOOKMARK NOT DEFINED.
STEP 3. EDIT IP ADDRESS PARAMETERS ............................................................ERROR! BOOKMARK NOT DEFINED.
S
TEP 4. DOWNLOAD IP ADDRESS PARAMETERS TO EXBS VIA SERIAL PORT.....ERROR! BOOKMARK NOT DEFINED.
ETHERPLUG ADDITIONAL FUNCTIONS ...............................................................ERROR! BOOKMARK NOT DEFINED.
3. Installation Error! Bookmark not defined.
P
HYSICALLY INSTALL EXBS INTO THE IP NETWORK .........................................ERROR! BOOKMARK NOT DEFINED.
USING THE “PING” FUNCTION ............................................................................ERROR! BOOKMARK NOT DEFINED.
I
NSTALLING ADDITIONAL EXB UNITS AFTER INITIAL INSTALLATION................ERROR! BOOKMARK NOT DEFINED.
Appendix Error! Bookmark not defined.
APPENDIX A. FACTORY DEFAULT CONFIGURATION...........................................ERROR! BOOKMARK NOT DEFINED.
A
PPENDIX B. MOUNTING OPTIONS.....................................................................ERROR! BOOKMARK NOT DEFINED.
APPENDIX C. CONNECTOR DETAILS...................................................................ERROR! BOOKMARK NOT DEFINED.
APPENDIX D. TROUBLESHOOTING......................................................................ERROR! BOOKMARK NOT DEFINED.
A
PPENDIX E. SPECIFICATIONS ............................................................................ERROR! BOOKMARK NOT DEFINED.
APPENDIX F. IP ADDRESSING.............................................................................ERROR! BOOKMARK NOT DEFINED.
Index 8
3 68-11926-100
CTI Products, Inc. DC Distribution Panel User Guide

INTRODUCTION

The DC Distribution Panel is an accessory to the MCN Monitoring and Control Network product family. It provides distribution and monitoring for dual redundant power supplies for cases where a power supply failure cannot be tolerated. The DC Distribution Panel has independently fused inputs for two power supplies, and 20 independently fused outputs. Each input and output fuse is monitored via Green/Red (OK/Fail) LEDs to aid in correcting a power supply problem. In addition, an audible alert is available to indicate any failure.
The DC Distribution Panel mounts in an EIA 19” rack and is 2 rack units (3.5”) high. Two (redundant) supplies also mount in a single EIA 19” rack and is also 2 rack units high.
Part Number Description S2-61160 DC Distribution Panel 81-11812 Power Supply
Figure 1 shows the front view of the DC Distribution Panel.

CIRCUIT DESCRIPTION

The outputs from redundant power supplies are independently connected to inputs on the DC Distribution Panel. Each supply input is separately fused with an automotive style fuse, and has an “OK” and “FAIL” LED indicator. When the input supply is present (and the input fuse is intact), the corresponding green “OK” LED is lit. If either input supply is not present, or the fuse is blown, the green “OK” LED for that input is turned off, and the red “FAIL” LED is lit. In addition, an on-board buzzer sounds when either supply input is not present, or if any of the input (???, ??? or output (??? – ???) fuses are blown. The buzzer may be disabled by setting the front panel switch to the ??? “OFF” position.
The DC Distribution Panel passes the supply current from the input supplies to 20 outputs. Each supply output is separately fused, and has an “OK” and “FAIL” LED indicator. When the output supply is present (and the output fuse is intact), the corresponding green “OK” LED is lit. If an output supply is not present, or the fuse is blown, the green “OK” LED for that output is turned off, and the red “FAIL” LED is lit. ???

Fuses

Table 1 lists field replaceable fuses for the DC Distribution Panel.
Fuse
Designation
F1, F2, F3, F4 65-11820 Fuse 1A 60V Fast Blow GMT Indicating
Figure 1 DC Distribution Panel Front View
CTI
Part Number
Description
Index 4
CTI Products, Inc. DC Distribution Panel User Guide
F5, F6 65-11851 Fuse 4A 32V Fast Blow Auto Mini
Table 1 – Fuses for DC Distribution Panel
Index 5
CTI Products, Inc. DC Distribution Panel User Guide

Status Indication

Three status signals are available to inform monitoring equipment if the redundant power supplies are functioning or if any fuses are blown. The three status signals are driven from solid state relays, with an output rating of 60V, and protected with 0.5A fuses. (These fuses are non-field replaceable, since they are soldered.) These signals are referenced to the COM signal. lists the terminal connections for these signals and jumpers for referencing to GND.
Signal TB7
Terminal
GND 1 Ground Reference
ALRM_FUSE- 2 E3 Relay contact closes if either
ALRM_FUSE+ 3 present, or if any fuse (F1 –
PWRB_OK- 4 E2 Relay contact closes if the
PWRB_OK+ 5 present and Fuse F6 is OK.
PWRA_OK- 6 E1 Relay contact closes if the
PWRA_OK+ 7 present and Fuse F5 is OK.
GND
Referenc
e Jumper
Description
input supply is not F6) is blown. input supply is
input supply is
Table 2

MOUNTING

The Power Supply Options are normally mounted to the panel on the side opposite to where the relay boards are mounted as indicated in Error! Reference source not found.. This figure shows the Hot-Standby Power Supply Option. For the Single Power Supply Option, only the supply on the right-hand side is used. (The Relay Power Distribution Board is not used for the Single Power Supply Option.)
Table 2 – TB7 Signal Connections
Index 6
CTI Products, Inc. DC Distribution Panel User Guide
Appendix F. IP Addresses 7
CTI Products, Inc. DC Distribution Panel User Guide

INDEX

A
Addressing Modes..................................................... 8
ARP - Address Resolution Protocol........................32
AUI..........................................................................17
AUI Connector ..........................................................7
B
Broadcast.................................................................33
C
Central Site........................................................11, 12
Channel Name.........................................................10
Configured router ................................................3, 19
Connector ................................................................24
Control Processor ....................................................19
D
Dotted Decimal........................................................31
Download ................................................................13
E
ERR LED.............................................................6, 19
Ethernet connector...............................................3, 17
Ethernet Connector..............................................7, 17
EtherPlug.................................................................10
EtherPlug.................................................................10
F
Factory Default Parameters.....................................19
Fiber Connector...................................................7, 17
Front Panel.................................................................5
G
Gateway Address.........................................11, 31, 32
Global IP Parameters...............................................12
Global IP Subnet Mask............................................10
H
Hardware Address.........................See MAC Address
Host IP Address.................................................11, 32
HostID.....................................................................31
I
Internal router..................................................3, 6, 19
Internet Protocol......................................................31
IP Address ...............................................................32
IP Settings Worksheet ...............................................9
IP Sync ....................................................................11
L
LEDs..........................................................................5
Logical Address.................................. See IP Address
M
MAC Address..........................................................32
MAC Refresh.....................................................11, 13
Media Access Control ...................See MAC Address
Member Name.........................................................11
Mounting Kit...........................................................16
Multicast........................................................8, 31, 32
N
NetID.......................................................................31
NETWORK connector ..................................3, 16, 19
O
Octets.......................................................................31
P
Ping..........................................................................18
Point-to-Multipoint..............................................8, 32
Port Number........................................................8, 32
Power Connection....................................................17
Programming Cable...........................................13, 25
R
Rear Panel..................................................................7
Repeater...............................................................3, 19
RJ45.............................................................16, 17, 24
S
Serial Cable .......................................................13, 25
SETRTR.EXE .........................................................19
Specifications ..........................................................30
Subnet Mask......................................................11, 31
Switch Settings..........................................................7
T
Target Members.......................................................11
U
Unicast/Replicated...............................................8, 32
Index 8
Loading...
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use