C-TECH-I LI-VLK-2 User Manual

C-TECH-I, INC

USERS' GUIDE

Double-Handle Kitchen Faucet

Applied Models: LI-VLK-2

Thank you for selecting our products.

This Instruction contains the usage, manipulation, maintenance etc. To help
insure that the installation process will proceed smoothly, please read these
instructions carefully before you begin.

Notes:

z Before installing the faucet, please read the instruction carefully.
z To avoid the impact of poor water quality on the usage of the faucet, we

recommend that you install the aerator in water supply pipe which
manufactured by our company. Please refer to the local dealer for details.

z Do not disconnect the faucet body by yourself.

Tools and Materials:

z Assorted Screwdrivers
z Adjustable Wrench
z Pipe Wrench
z Wrench
z Pliers
z Thread Sealant

z Other tools as needed

1

C-TECH-I, INC

Installation

USERS' GUIDE

See the illustration left

1. Position the faucet body at
the hole of the sink.

2. From the bottom, assemble
the decorative ring, nuts,
rubber gasket, steel gasket,
bolts and nuts. Tighten
them with a wrench. Fix the
faucet body up to the sink
appropriately.

3. Revolve one end of the
cold and hot inlet hoses
into the faucet body; and
the other end connect to
the cold and hot water
supply. Do not use
excessive force

4. Connect the inlet hoses to
the water supplies. Before
connecting the inlet hose to
the indoor water supply
pipe, you should pay
attention to

the three points

as follow:

1) Flush the pipe;

Max 860kpa(8.6bar)

Hot

2) There are no stings at the ends of the water supply pipe;

3) Using other seal materials at the ends of the inlet pipe is not allowed

2

Cold