Customer’s Approval
Signature
Date
Approved By Product Director
Name:
Signature:
Date
Reviewed By PM Manager
Name:
Signature:
Date
Reviewed By Project Leader
Name:
Signature:
Date
Reviewed By PM
Name:
Signature:
Date
Global LCD Panel Exchange Center
MODEL: MT3151A04-1
Ver. 1.1
Date: 14.Nov.2011
www.panelook.com
MT3151A04-1 Product Specification
CSOT
Richard Lung
Aaron Tu
Joe Kuo
Charles Chin
The copyright belongs to Shenzhen China Star 1 / 26 Ver. 1.1
Optoelectronics Technology Co., Ltd.
Any unauthorized use is prohibited.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
MT3151A04-1 Product Specification
Contents
Revision History ................................................................................................................................................ 4
1. General Description ....................................................................................................................................... 5
1.1 Product Features .................................................................................................................................. 5
1.2 Overview .............................................................................................................................................. 5
1.3 General Information ............................................................................................................................. 5
2. Electrical Specification .................................................................................................................................. 6
2.1 Electrical Characteristics ..................................................................................................................... 6
2.1.1 Power Consumption (TA = 25 ± 2 °C) ..................................................................................... 6
2.1.2 LVDS Characteristics ................................................................................................................ 7
3. Backlight Converter Unit ............................................................................................................................... 8
3.1 LED Converter Electrical Characteristics (TA = 25 ± 2 ºC) ................................................................ 8
3.2 LED Converter Power Sequence ......................................................................................................... 9
4. Input Terminal Pin Assignment ................................................................................................................... 10
4.1 TFT LCD Module .............................................................................................................................. 10
4.2 Converter Unit ................................................................................................................................... 12
4.2.1 Converter Input Connector Pin Definition.............................................................................. 12
4.3 Block Diagram of Interface ............................................................................................................... 13
4.4 LVDS Interface .................................................................................................................................. 13
4.4.1 VESA Format (SELLVDS = L or Open) ................................................................................ 13
4.4.2 JEIDA Format (SELLVDS = H) ............................................................................................. 13
5. Interface Timing ........................................................................................................................................... 14
5.1 Timing Table (DE Only Mode) .......................................................................................................... 14
5.2 Power On/Off Sequence .................................................................................................................... 15
6. Optical Characteristics ................................................................................................................................. 16
6.1 Measurement Conditions ................................................................................................................... 16
6.2 Optical Specifications ........................................................................................................................ 17
7. Mechanical Characteristics .......................................................................................................................... 21
7.1 Mechanical Specification ................................................................................................................... 21
7.2 Packing............................................................................................................................................... 22
7.2.1 Packing Specifications ............................................................................................................ 23
7.2.2 Packing Method ...................................................................................................................... 23
8. Definition of Labels ..................................................................................................................................... 24
8.1 Module Label ..................................................................................................................................... 24
8.2 Carton Label ...................................................................................................................................... 24
8.3 Pallet Label ........................................................................................................................................ 25
9. Precautions ................................................................................................................................................... 26
The copyright belongs to Shenzhen China Star 2 / 26 Ver. 1.1
Optoelectronics Technology Co., Ltd.
Any unauthorized use is prohibited.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
9.1 Assembly and Handling Precautions ................................................................................................. 26
9.2 Safety Precautions.............................................................................................................................. 26
www.panelook.com
MT3151A04-1 Product Specification
The copyright belongs to Shenzhen China Star 3 / 26 Ver. 1.1
Optoelectronics Technology Co., Ltd.
Any unauthorized use is prohibited.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Ve r si o n
Page (New)
Section
Revision by
1.0
14
.2011
Tentative
Charles Chin
Global LCD Panel Exchange Center
www.panelook.com
MT3151A04-1 Product Specification
Ve r.
Date
.Nov
26
Revision History
Description
All
Specification was First Issued.
The copyright belongs to Shenzhen China Star 4 / 26 Ver. 1.1
Optoelectronics Technology Co., Ltd.
Any unauthorized use is prohibited.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
t
Unit
Active Area
697.68
Bezel Opening Area
705.4
Outline Dimension
735.4
D:
Weight
5.2
Max.
Driv
a-Si TFT
Number of Pixels
1366
pixel
Pixel Pitch
0.17025
Pixel
RGB Vertical Stripe
Display Colors
16.7
color
8-bit
Display Mode
Tran
Surface Treatment
Anti
Luminance of White
350
cd/m²
Center Point, Typ.
Global LCD Panel Exchange Center
1. General Description
1.1 Product Features
- HD Resolution (1366 x 768)
- High Brightness: 350 cd/m²
- Very High Contrast Ratio: 4000:1
- Fast Response Time
- High Color Saturation: 72% NTSC
www.panelook.com
MT3151A04-1 Product Specification
- Ultra Wide Viewing Angle: 178° (H)/178° (V) (CR
10)
- Low Power Consumption: Typ. 35W
- DE (Data Enable) Mode
- LVDS (Low Voltage Differential Signaling) Interface
1.2 Overview
MT3151A04-1 is a diagonal 31.5” color active matrix LCD module with edge LED backlight and 1ch-LVDS interface.
This module is a transmissive type display operating in the normally black mode. It supports 1366 x 768 HD resolution and
can display up to 16.7M colors (8-bit). Each pixel is divided into Red, Green and Blue sub-pixels which are arranged in
vertical stripe. The converter of backlight is built-in.
This module dedicates for LCD TV products and provides excellent performance which includes high brightness, ultra
wide viewing angle, high color saturation and high color depth.
1.3 General Information
Item Specification
45 (H) x 392.2560 (V) mm
(H) x 400.0 (V) mm
Note
ing Scheme
(Sub Pixel)
Arrangement
The copyright belongs to Shenzhen China Star 5 / 26 Ver. 1.1
Optoelectronics Technology Co., Ltd.
Any unauthorized use is prohibited.
(H) x 433.0 (V) x 16.2 (D) mm
kg
Active Matrix -
x 768
(H) x 0.51075 (V) mm
-
M
smissive Mode, Normally Black -
-glare, Haze 12%, Hard Coating (3H)
From Bezel to Rear
-
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Symbol
Unit
Note
Min.
Typ.
Max.
Power Supply Voltage
TBD
12.0
TBD V
)
Rush Current
- - 3 A
)
Power Supply
Current
White Pattern
-
0.27 0.35
)
Horizontal
-
0.24
0.32
Black Pattern
-
0.15
0.2
Ńġ
Ńġ
Ńġ
Ńġ
œġ
ňġ
œġ
œġ
œġ
ňġ
ňġ
ňġ
Ńġ
œġ
œġ
œġ
œġ
ňġ
ňġ
ňġ
ňġ
Ńġ
Ńġ
Ńġ
GND
V
V
0.1
V
470 μs
Global LCD Panel Exchange Center
2. Electrical Specification
2.1 Electrical Characteristics
2.1.1 Power Consumption (TA = 25 ± 2 °C)
Parameter
www.panelook.com
MT3151A04-1 Product Specification
Value
V
I
I
Stripe I
I
Note:
(1) The ripple voltage should be controlled less than 10% of V
(2) Measurement condition: V
rising time = 470 μs.
CC
CC
x
CC
Fig. 2.1 VCC rising time condition
CC
RUSH
CC
CC
CC
x 0.9.
CC
(1
(2
A
A
A
.
CC
(3
(3) Measurement condition: V
A. White Pattern B. Horizontal Pattern
= 12 V, Ta = 25 ± 2 ºC, F = 60 Hz. The test patterns are shown as below.
CC
C. Black Pattern
Fig. 2.2 Test patterns
The copyright belongs to Shenzhen China Star 6 / 26 Ver. 1.1
Optoelectronics Technology Co., Ltd.
Any unauthorized use is prohibited.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Symbol
Unit
Note
Min.
.
Max.
LVDS Interface
Differential Input High
Threshold Voltage
+ 100
mV
1)
Differential Input Low
Threshold Voltage
100
mV
Common Input
Differential
|
200 - 600
mV
Terminating Resistor
100
ohm
CMOS Interface
Input High Threshold
V
Input Low Threshold Voltage
V
VTH
VTL
|VID|
VCM
GND
GND
Global LCD Panel Exchange Center
2.1.2 LVDS Characteristics
Parameter
www.panelook.com
MT3151A04-1 Product Specification
Value
Typ
Voltage V
Input Voltage |V
R
Voltage
Note:
(1) The LVDS input signal has been defined as follows:
V
TH
V
TL
CM
ID
T
V
IH
V
IL
- - -
1.0
-
2.7
0.0
- -
1.2
1.4
-
- 3.3
- 0.6
V
(
Fig. 2.3 LVDS input signal
The copyright belongs to Shenzhen China Star 7 / 26 Ver. 1.1
Optoelectronics Technology Co., Ltd.
Any unauthorized use is prohibited.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Symbol
Condition
Unit
Note
Min.
Typ.
Max.
Power Consumption
24V
27.6
Watt
(1)
Input Voltage
22.8
24.0
25.2
Input Current
24V
1.15
0
Input Inrush Current
24V
-
2.7
(2)
- 5
On/Off Control
Voltage
24V
2.4 -
5.0 V
Off
24V
0.0 -
0.8 V
On/Off Control
24V
-
1.5
mA
PWM Dimming
Control Voltage
Max.
24V
2.4 -
5.0
Min.
24V
0.0 -
0.8 V
External PWM Control Current
24V
2
mA
PWM Dimming Frequency
24V
140
180
240
Hz
Min
24V
(3)
DET
I
24V
-
ow
24V
-
0.8
Input Impedance
24V
300
Kohm
VBL
V
t
t
t
20ms
I
IBL
Global LCD Panel Exchange Center
www.panelook.com
3. Backlight Converter Unit
3.1 LED Converter Electrical Characteristics (TA = 25 ± 2 ºC)
MT3151A04-1 Product Specification
Parameter
P
V
I
On
- I
F
Dimming Duty Ratio D
I
RS-VIN
V
BLON
BLON
V
P-DIM
I
P-DIM
P-DIM
P-DIM
BL
BL
BL
Value
=
V
BL
-
-
=
V
BL
-
-
37
1.7
V
A
A
VBL =
-
V
=
BL
V
=
BL
V
=
BL
V
=
BL
V
=
BL
V
=
BL
V
=
BL
V
=
BL
-
5
10
-
%
A
V
V
DET H
BL
=
Open Collector
Status Signal
DET L
R
IN
V
=
BL
=
V
BL
0
-
-
V
Note:
(1) Dimming ratio = 100% (Max.) (TA = 25 ± 5 ºC, Turn on for 45minutes).
(2) The measurement condition: VBL rising time is 20 ms. (VBL from 10% ~ 90%), the sequence diagram is shown as Fig.3.1.
(3) 5% ~10%minimum duty ratio is only valid for electrical operation.
(4) Normal: 0 ~ 0.8V; Abnormal: Open collector.
BLON
RS-VIN
Fig. 3.1 The timing sequence diagram of inrush current measurement
The copyright belongs to Shenzhen China Star 8 / 26 Ver. 1.1
Optoelectronics Technology Co., Ltd.
Any unauthorized use is prohibited.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
No.
Symbol
Min.
Typ.
Max.
Unit
Remark
1
2
3
4
5
0.9
BL
0.1
0.9 VBL
0.1
V
L
V
BLON
0
0 0 V
DIM
T5
T2
T1
T3
T4
2.4V
0.8V
2.4V
0.8V
Global LCD Panel Exchange Center
3.2 LED Converter Power Sequence
T1 20 - - ms
T2 500 - - ms
www.panelook.com
MT3151A04-1 Product Specification
T3 250 - - ms
See Fig. 3.2
T4 0 - - ms
T5 250
B
V
BL
P-
- -
ms
V
V
BL
Attention:
The power sequence:
On = V
Off = V
BL
BLON
> V
P-DIM
>= V
>= V
P-DIM
BLON
> VBL
Fig. 3.2 The power sequence of VBL and V
BLON
The copyright belongs to Shenzhen China Star 9 / 26 Ver. 1.1
Optoelectronics Technology Co., Ltd.
Any unauthorized use is prohibited.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
o.
Pow
Power Supply
Power Supply
Power Supply
Ground
Ground
Ground
Ground
LVDS Data Format Selection
10
For
Ground
1st Channel LVDS Data Input
1st Channel LVDS Data Input
Ground
1st Channel LVDS Data Input
1st Channel LVDS Data Input (1+)
Ground
1st Channel LVDS Data Input
1st Channel LVDS Data Input
Ground
1st Channel LVDS Clock Input
1st Channel LVDS Clock Input
Ground
1st Channel LVDS Data Input
1st Channel LVDS Data Input
Ground
For
28
For
29
For
Ground
Global LCD Panel Exchange Center
www.panelook.com
4. Input Terminal Pin Assignment
4.1 TFT LCD Module
CN1: 300B30-0000RA-M4 (STARCONN) or equivalent (see Note (1))
MT3151A04-1 Product Specification
Pin N
Symbol Description Note
1 VCC
2 VCC
3 VCC
4 VCC
5 GND
6 GND
7 GND
8 GND
9 LVDS SEL
NC
11
12
13
14
15
GND
LV 1N 0
LV1P0
GND
LV 1N 1
er Supply ,+ 12 V DC Regulated
,+ 12 V DC Regulated
,+ 12 V DC Regulated
,+ 12 V DC Regulated
(2)
CSOT Users Only
(0-)
(0+)
(1-)
16
17
18
19
20
21
22
23
24
25
26
27
30
LV 1P 1
GND
LV 1N 2
LV1P2
GND
LV CK 1N
LV CK 1P
GND
LV 1N 3
LV1P3
GND
NC
NC
NC
GND
(2-)
(2+)
(-)
(+)
(3-)
(3+)
CSOT Users Only (3)
CSOT Users Only (3)
CSOT Users Only (3)
The copyright belongs to Shenzhen China Star 10 / 26 Ver. 1.1
Optoelectronics Technology Co., Ltd.
Any unauthorized use is prohibited.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
# 1
# 30
# 1
# 30
Global LCD Panel Exchange Center
Note:
(1) The direction of pin assignment is shown as below:
www.panelook.com
MT3151A04-1 Product Specification
CN1
CN1
Fig. 4.1 LVDS direction sketch map
(2) High: connect to +3.3 V ė JEIDA format; Low: connect to GND or Open ė VESA format.
(3) For CSOT internal only, please let it open.
The copyright belongs to Shenzhen China Star 11 / 26 Ver. 1.1
Optoelectronics Technology Co., Ltd.
Any unauthorized use is prohibited.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
No.
Symbol
Power Supply
GND
Normal (0 ~ 0.8V) ,Abnormal (Open Collector)
(Recommend Pull high R > 10K, VDD = 3.3V)(Note 2)
BLON
Back Light On/Off: Back Light On :High(2 ~ 5V) /Open (NC) ; Back
Light Off: Low (0 ~ 0.8V/GND)
No Connection
DIM
PWM Dimming Control
# 1
# 14
CNF1
CNF1
# 1
# 14
Global LCD Panel Exchange Center
4.2 Converter Unit
4.2.1 Converter Input Connector Pin Definition
CI0114M1HR0-NHC (Cvilux) or equivalent (see 4.1 Note (1))
CNF1:
www.panelook.com
MT3151A04-1 Product Specification
Pin
10
11
12
13
Feature
1
2
3
4
5
6
7
8
9
VBL
GND
DET
NC
, + 24 V DC Regulated
14
Attention:
(1 )The direction of pin assignment is shown as below.
(2)When open collector occur, the limit current resistor need to be connected to DET pin to prevent MOSFET
from damage, the max. drain current of MOSFET is 100mA.
P_
Fig. 4.2 Converter connector direction sketch map
(Open for 100%)
The copyright belongs to Shenzhen China Star 12 / 26 Ver. 1.1
Optoelectronics Technology Co., Ltd.
Any unauthorized use is prohibited.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
B
3
4
G
R2
B1 B0 G5 G4 G3 G2 G1
RSVD B7 B6 G7
R6
DE VS
B4 B3 B2
G0 R5 R4
R0
Connector
Timing Controller
LV CK 1 P
LV 1N 3
LV1P1
LV 1N 2
LV 1N 0
LV1P0
LV 1N 1
LV1P2
LV CK 1 N
LV1P3
100Ω
100Ω
100Ω
100Ω
100Ω
LV C K1 N/ LV C K1 P
LV1N0/ LV1P0
LV1N1/ LV1P1
LV1N2/ LV1P2
LV1N3/ LV1P3
LV C K1 N/ LV C K1 P
LV1N0/ LV1P0
LV1N1/ LV1P1
LV1N2/ LV1P2
LV1N3/ LV1P3
Global LCD Panel Exchange Center
4.3 Block Diagram of Interface
www.panelook.com
MT3151A04-1 Product Specification
Attention:
(1) LCD module uses a 100 ohms (Ω) resistor between positive and negative lines of each receiver input.
(2) LVDS cable impedance shall be 50 ohms per signal line or about 100 ohms per twist-pair line respectively.
4.4 LVDS Interface
4.4.1 VESA Format (SELLVDS = L or Open)
4.4.2 JEIDA Format (SELLVDS = H)
R3 R2 R1
HS B5
G6 R7
2 R7 R6 R5 R4 R3
3 B2 G7 G6 G5 G4 G
DE VS HS B7 B6 B5 B
RSVD B1 B0 G1 G0 R1 R0
The copyright belongs to Shenzhen China Star 13 / 26 Ver. 1.1
Optoelectronics Technology Co., Ltd.
Any unauthorized use is prohibited.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Symbol
Min.
Typ.
Max.
Unit
LV DS
Frequency
(=
T
clk
)
50.0
75.4 85.0
MHz
Vertical
Ter m
Frame
TBD. 60
TBD.
Hz
Vertical Frequency
47.0
48.4
60.9
KHz
Total
784
806
1015
T
Display
Blank
16 38
247
Horizontal
Ter m
Total
1460
1560
2000
T
Display
Blank
94
194
634
Tvd
Tvb
Tv
T
DE
Thb
Valid Display Data
T
clk
DCLK
Thd
DE
DATA
Global LCD Panel Exchange Center
5. Interface Timing
5.1 Timing Table (DE Only Mode)
www.panelook.com
MT3151A04-1 Product Specification
Signal Item
Clock
F
clk
Note
1 /
Rate F
F
v
T
T
T
T
v
vd
vb
h
768 T
T
h
h
T
h
T
clk
= Tvd + T
v
= Thd + T
h
T
T
hd
hb
1366 T
clk
T
clk
Attention:
(1) The module is operated in DE only mode, H sync and V sync input signal have no effect on normal operation.
vb
hb
h
Fig. 5.1 Interface signal timing diagram
The copyright belongs to Shenzhen China Star 14 / 26 Ver. 1.1
Optoelectronics Technology Co., Ltd.
Any unauthorized use is prohibited.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Fig
LVDS & Option Signal
Parameter
Min.
Typ.
Max.
ms
00
ms
ms
50%
T6
0.1
CC
Power Off
50%
T5
T4
0 V
0 V
T3
T1
0.1 VCC
T2
Valid Data
Power On
Global LCD Panel Exchange Center
www.panelook.com
MT3151A04-1 Product Specification
5.2 Power On/Off Sequence
To prevent a latch-up or DC operation of LCD module, the power on/off sequence should be as the diagram below.
V
. 5.2 Power On/Off
Values
Unit
T1 0.5
T2 0 - 50
- 10
ms
ms
T3 0 - 50
T4 10
- - ms
T5 500
T6 100
- -
- -
Attention:
(1) The supply voltage of the external system for the module input should follow the definition of V
CC
.
(2) Apply the lightbar voltage within the LCD operation range. When the backlight turns on before the LCD operation or the
LCD turns off before the backlight turns off, the display may momentarily become abnormal screen.
(3) In case that V
is in off level, please keep the level of input signals on the low or high impedance. If T2 < 0, that may
CC
cause electrical overstress.
(4) T4 should be measured after the module has been fully discharged between power off and on period.
(5) Interface signal shall not be kept at high impedance when the power is on.
The copyright belongs to Shenzhen China Star 15 / 26 Ver. 1.1
Optoelectronics Technology Co., Ltd.
Any unauthorized use is prohibited.
www.panelook.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
Ambient
Ambient
Sup
Driving Signal
Refer
Light Source Current (
Vertical Refresh Rate
r
S = πr²
For Square
Z
Z
500pixels
N means the actual number of the pixels in the area S.
N =
S
A
Global LCD Panel Exchange Center
6. Optical Characteristics
6.1 Measurement Conditions
The table below is the test condition of optical measurement.
Item Symbol Value Unit
www.panelook.com
MT3151A04-1 Product Specification
Temperature TA
Humidity HA
25 r 2
50 r 10
ºC
% RH
ply Voltage VCC 12 V
Each Unit)
F
to the typical value in Chapter 3: Electrical Specification
IL 110 mA
60 Hz
R
To avoid abrupt temperature change during optical measurement, it’s suggested to warm up the LCD module more than 45
minutes after lighting the backlight and in the windless environment.
To measure the LCD module, it is suggested to set up the standard measurement system as Fig. 6.1. The measuring area S
should contain at least 500 pixels of the LCD module as illustrated in Fig.6.2 (A means the area allocated to one pixel). In this
model, for example, the minimum measuring distance Z is 370 mm when T is 2 degree. Hence, 500 mm is the typical
measuring distance. This measuring condition is referred to 301-2H of VESA FPDM 2.0 about viewing distance, angle, and
angular field of view definition.
T
T
Fig. 6.1 The standard set-up system of measurement
The copyright belongs to Shenzhen China Star 16 / 26 Ver. 1.1
Optoelectronics Technology Co., Ltd.
Any unauthorized use is prohibited.
Fig. 6.2 The area S contains at least 500 pixels to be measured
ı
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Symbol
Min.
Typ.
Max.
Unit
Static Contrast Ratio
CR
Normal direction at
center point of the
LCD Module
- 4000 - -
(1
Response
- 6.5
12
ms
(3) Center Luminance
280
350
-
cd/m2
(2
Uniformity of
-
75 - - %
(2
Color
Chromaticity
(CIE1931)
Red
Typ.
- 0.03
0.638
Typ.
+
0.03
-
(2
0.335
-
Green
0.323
-
0.621
-
Blue
0.156
-
0.054
-
White
0.280
-
0.290
-
Color Gamut
CG
68
72
-
% NTSC
Viewing Angle
Horizontal
CR
-
89
-
Deg.
(7
-
89
-
Vertical
-
89
-
-
89
-
CR-W
CR-D
Global LCD Panel Exchange Center
6.2 Optical Specifications
The table below of optical characteristics is measured by MINOLTA CS2000, MINOLTA CA310, ELDIM OPTI
Scope-SA and ELDIM EZ Contrast in dark room.
www.panelook.com
MT3151A04-1 Product Specification
Item
Time T
L
White Screen
R
R
G
G
B
B
W
W
T
L
W
X
TH = 0q, TV = 0q
Y
X
Y
X
Y
X
Y
H+
Condition
Note
) (2)
) (4)
) (5)
) (6)
T
H-
t 10
T
V+
T
V-
Note:
(1) Definition of static contrast ratio (CR):
It’s necessary to switch off all the dynamic and dimming function when measuring the static contrast ratio.
Static Contrast Ratio (CR) =
CR-W is the luminance measured by LMD (light-measuring device) at the center point of the LCD module with
full-screen displaying white. The standard setup of measurement is illustrated in Fig. 6.3; CR-D is the luminance measured
by LMD at the center point of the LCD module with full-screen displaying black. The LMD in this item is CS2000.
(2) The LMD in the item could be a spectroradiometer such as (KONICA MINOLTA) CS2000, CS1000(TOPCON), SR-UL2
The copyright belongs to Shenzhen China Star 17 / 26 Ver. 1.1
Optoelectronics Technology Co., Ltd.
Any unauthorized use is prohibited.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
or the same level spectroradiometer. Other display color analyzer (KONICA MINOLTA) CA210, CA310 or (TOPCON)
BM-7 could be involved after being calibrated with a spectroradiometer on each stage of a product.
)
www.panelook.com
Luminance
of
Current Frame
Y:
t
X to Y
100%
Brighter State
10%
0%
Time
Luminance
X: 0%, 25%, 50%, 75%, 100%
Darker State
Black & White
LCD Module
90%
Global LCD Panel Exchange Center
Fig. 6.3 The standard setup of CR measurement
www.panelook.com
MT3151A04-1 Product Specification
LMD
(3) Response time T
time matrix in which each element t
luminance ratios among 0%, 25%, 50%, 75%, and 100% luminance. The transition time t
is defined as the average transition time in the response time matrix. The table below is the response
L
is the transition time from luminance ratio X to Y. X and Y are two different
X to Y
is defined as the time taken
X to Y
from 10% to 90% of the luminance difference between X and Y (X < Y) as illustrated in Fig.6.4. When X > Y, the
definition of t
optimized on refresh rate F
Measured
Transition Time
Ratio
t
means the transition time from luminance ratio X to Y.
X to Y
is the time taken from 90% to 10% of the luminance difference between X and Y. The response time is
X to Y
= 60Hz.
r
Luminance Ratio of Previous Frame
0% 25% 50% 75% 100%
0%
25%
50%
75%
100%
t
t
0% to 25%
t
0% to 50%
t
0% to 75%
t
0% to 100%
25% to 0%
t
25% to 50%
t
25% to 75%
t
25% to 100%
t
50% to 0%
t
50% to 25%
t
50% to 75%
t
50% to 100%
t
75% to 0%
t
75% to 25%
t
75% to 50%
t
75% to 100%
t
100% to 0%
t
100% to 25%
t
100% to 50%
t
100% to 75%
Luminance
t
100%
90%
10%
0%
Xto Y
Darker state
X: 0%, 25% 50%, 75%, 100%
Fig. 6.4 The definition of t
0%, 25%, 50%, 75%, 100%
Y: 0%, 25% 50%, 75%, 100%
Brighter state
X to Y
Time
All the transition time is measured at the center point of the LCD module by ELDIM OPTI Scope-SA.
The copyright belongs to Shenzhen China Star 18 / 26 Ver. 1.1
Optoelectronics Technology Co., Ltd.
Any unauthorized use is prohibited.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
White
LCD Module
LMD
Fig. 6.6
(9)
(1)
(4)
(3)
(2)
(5)
(6)
(7)
(8)
(9)
V/9
V/9
V/2
V/2
V
H
H/2
H/2
H/9
H/9
Global LCD Panel Exchange Center
www.panelook.com
(4) Definition of center luminance (LW):
The luminance is measured at the center point of the LCD module with full-screen displaying white. Fig. 6.5 shows the
standard setup of luminance measurement.
Fig. 6.5 The standard setup of luminance measurement
(5) Definition of uniformity of white screen:
MT3151A04-1 Product Specification
The luminance Li (i from 1 to 9) is measured at the 9 points defined in Fig. 6.6. H and V indicate active area.
From the measured set of luminance values Li (i from 1 to 9), the minimum luminance is denoted as L
maximum luminance is denoted as L
Uniformity = L
min
/ L
x 100%.
max
. The uniformity of white screen is defined according to
max.
min
Symbol “ + ” defines the 9 measuring locations (1), (2), (3) ·· ·
(6) Definition of color chromaticity:
Each chromaticity coordinates (x, y) are measured in CIE1931 color space when full-screen displaying primary color R, G,
B and white. The color gamut is defined as the fraction in percent of the area of the triangle bounded by R, G, B
and the
coordinates and the area is defined by NTSC 1953 color standard in the CIE color space. Chromaticity coordinates are
measured by CS2000 and the standard setup of measurement is shown in Fig. 6.7.
The copyright belongs to Shenzhen China Star 19 / 26 Ver. 1.1
Optoelectronics Technology Co., Ltd.
Any unauthorized use is prohibited.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Colors
LCD Module
LMD
H+
H-
V-
V+
Z
Y
X
Global LCD Panel Exchange Center
Fig. 6.7 The standard setup of color chromaticity measurement
(7) Definition of viewing angle coordinate system (TH, TV):
The contrast ratio is measured at the center point of the LCD module. The viewing angles are defined at the angle that the
contrast ratio is larger than 10 at four directions relative to the perpendicular direction of the LCD module (two vertical
www.panelook.com
MT3151A04-1 Product Specification
angles: up T
and down TV-; and two horizontal angles: right TH+ and left TH-) as illustrated in Fig. 6.8. The contrast ratio
V+
is measured by ELDIM EZ Contrast.
Fig. 6.8 Viewing angle coordination system
T
T
T
T
The copyright belongs to Shenzhen China Star 20 / 26 Ver. 1.1
Optoelectronics Technology Co., Ltd.
Any unauthorized use is prohibited.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
7. Mechanical Characteristics
7.1 Mechanical Specification
www.panelook.com
MT3151A04-1 Product Specification
The copyright belongs to Shenzhen China Star 21 / 26 Ver. 1.1
Optoelectronics Technology Co., Ltd.
Any unauthorized use is prohibited.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
MT3151A04-1 Product Specification
The copyright belongs to Shenzhen China Star 22 / 26 Ver. 1.1
Optoelectronics Technology Co., Ltd.
Any unauthorized use is prohibited.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Packing Box
7
830
)
Net Weight: 36.40 (Max.)
Gross Weight
2.40 (Max.)
Pallet
1 1150
)
Net Weight
Stack Layer
2
Boxes per Pallet
6
Pallet after Packing
42
pallet
1150.00 (L) x 850.00 (W) x1169.00(H)
Gross Weight:246
Panel
LCD Module
Bottom Cushion
PE Bag
Top Cushion
Carton
Carton Label
Masking Tape
Adhesive Tape
Corner Protector (1)
PE Sheet
Pallet Label
Corner Protector (2)
PE Film
PE Belt
Global LCD Panel Exchange Center
7.2 Packing
7.2.1 Packing Specifications
Item
Quantity
www.panelook.com
MT3151A04-1 Product Specification
Specification
Dimension (mm) Weight (kg)
7.2.2 Packing Method
pcs / box
boxes / pallet
pcs /
Protector Film
.00 (L) x 380.00 (W) x 523.00 (H
.00 (L) x 850.00 (W) x 120.00 (H
: 4
: 5.04
Fig. 7.1 Packing method (protector film stick on the front of the LCD module)
Pallet
Fig.7.2 Package
The copyright belongs to Shenzhen China Star 23 / 26 Ver. 1.1
Optoelectronics Technology Co., Ltd.
Any unauthorized use is prohibited.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
MT3151A0
MT3151A04-1
Week
Ye ar
CSOT Internal Use
Model Version Code
Year, Month, Date
CSOT Internal Use
CSOT Internal Use
Panel ID
Global LCD Panel Exchange Center
8. Definition of Labels
8.1 Module Label
www.panelook.com
MT3151A04-1 Product Specification
4-1
For RoHS compatible products, CSOT will add RoHS for identification.
Model Name: MT3151A04-1
Ver.X.X: Version, for example: 0.1, 0.2, … , 1.1, 1.2, …, 2.1, 2.2, …
WC (Week Code): XX XX
Year: 2010 = 10, 2011 = 11 … 2020 = 20, 2021 = 21…
Week: 01, 02, 03 …
Serial Number: XXXXXXXXXXXX XXXXXXXX
8.2 Carton Label
Serial Number: XXXX XX XXXXX XXXXX
The copyright belongs to Shenzhen China Star 24 / 26 Ver. 1.1
Optoelectronics Technology Co., Ltd.
Any unauthorized use is prohibited.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
CSOT Internal Use
Model Version Code
Yea r , Mo n th
CSOT Internal Use
MT3151A04-1
42
6
Global LCD Panel Exchange Center
Manufactured Date:
Year: 2010 = 10, 2011 = 11…2020 = 20, 2021 = 21…
Month: 1~9, A~C, for Jan. ~ Dec.
Date: 01~31, for 1st to 31st
Model Version Code: Version of product, for example: 01, 02, 11, 12…
www.panelook.com
8.3 Pallet Label
MT3151A04-1 Product Specification
Serial Number: XXX XX XXX XXXXX
The copyright belongs to Shenzhen China Star 25 / 26 Ver. 1.1
Optoelectronics Technology Co., Ltd.
Any unauthorized use is prohibited.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
MT3151A04-1 Product Specification
9. Precautions
9.1 Assembly and Handling Precautions
(1) Do not apply rough force such as bending or twisting to the module during assembly.
(2) It is recommended to assemble or install a module into the user’s system in clean working areas. The dust and oil
may cause electrical short or damage the polarizer.
(3) Do not apply pressure or impulse to the module to prevent the damage to LCD panel and backlight.
(4) Always follow the correct power-on sequence. This can prevent the damage and latch-up to the LSI chips.
(5) Do not plug in or pull out the interface connector while the LCD module is in operation.
(6) Do not disassemble the module.
(7) Use soft dry cloth without chemicals for cleaning because the surface of polarizer is very soft and easily be
scratched.
(8) Moisture can easily penetrate into the LCD module and may cause the damage during operation.
(9) High temperature or humidity may deteriorate the performance of the LCD module. Please store LCD modules in
the specified storage conditions.
(10) When ambient temperature is lower than 10 ºC, the display quality might be deteriorated. For example, the
response time will become slow, and the starting voltage of LED light bar will be higher than that in room
temperature.
9.2 Safety Precautions
(1) If the liquid crystal material leaks from the panel, it should be kept away from the eyes or mouth. In case of
contact with hands, skin or clothes, it has to be washed away thoroughly with soap.
(2) After the LCD module’s end of life, it is not harmful in case of normal operation and storage.
The copyright belongs to Shenzhen China Star 26 / 26 Ver. 1.1
Optoelectronics Technology Co., Ltd.
Any unauthorized use is prohibited.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Loading...