Crystal Image Technologies RM-111-17, RM-111-19 User Manual

751

User Manual



1U LCD Console Drawer

RM-111-17 / 19

Options :

- AV / DVI-D / HDMI

- Full Range KVM

- DC power

dedicated KVM switch and rackmount screen technology

17” / 19” LCD

UM-CV-751-Q217V3 www.UDFNPRXQWVDOes.com

Legal Information

First English printing, October 2002
Information in this document has been carefully checked for accuracy; however, no guarantee is given to the correctness
of the contents. The information in this document is subject to change without notice. We are not liable for any injury or
loss that results from the use of this equipment.

Safety Instructions
Please read all of these instructions carefully before you use the device. Save this manual for
future reference.

■ Unplug equipment before cleaning. Don’t use liquid or spray detergent; use a moist cloth.

■ Keep equipment away from excessive humidity and heat. Preferably, keep it in an air-conditioned environment with

temperatures not exceeding 40º Celsius (104º Fahrenheit).

■ When installing, place the equipment on a sturdy, level surface to prevent it from accidentally falling and causing

damage to other equipment or injury to persons nearby.

■ When the equipment is in an open position, do not cover, block or in any way obstruct the gap between it and the

power supply. Proper air convection is necessary to keep it from overheating.

■ Arrange the equipment’s power cord in such a way that others won’t trip or fall over it.

■ If you are using a power cord that didn’t ship with the equipment, ensure that it is rated for the voltage and current

labeled on the equipment’s electrical ratings label. The voltage rating on the cord should be higher than the one listed
on the equipment’s ratings label.

■ Observe all precautions and warnings attached to the equipment.

■ If you don’t intend on using the equipment for a long time, disconnect it from the power outlet to prevent being

damaged by transient over-voltage.

■ Keep all liquids away from the equipment to minimize the risk of accidental spillage. Liquid spilled on to the power

supply or on other hardware may cause damage, fi re or electrical shock.

■ Only qualifi ed service personnel should open the chassis. Opening it yourself could damage the equipment and

invalidate its warranty.

■ If any part of the equipment becomes damaged or stops functioning, have it checked by qualifi ed service personnel.

What the warranty does not cover

■ Any product, on which the serial number has been defaced, modifi ed or removed.

■ Damage, deterioration or malfunction resulting from:

□ Accident, misuse, neglect, fi re, water, lightning, or other acts of nature, unauthorized product modifi cation, or
failure to follow instructions supplied with the product.
□ Repair or attempted repair by anyone not authorized by us.
□ Any damage of the product due to shipment.
□ Removal or installation of the product.
□ Causes external to the product, such as electric power fl uctuation or failure.
□ Use of supplies or parts not meeting our specifi cations.
□ Normal wear and tear.
□ Any other causes which does not relate to a product defect.

■ Removal, installation, and set-up service charges.

Regulatory Notices Federal Communications Commission (FCC)

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of
the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation.
Any changes or modifi cations made to this equipment may void the user’s authority to operate this equipment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following measures:

■ Re-position or relocate the receiving antenna.

■ Increase the separation between the equipment and receiver.

■ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

UM-CV-751-Q217V3 www.UDFNPRXQWVDOes.com

< Part. 3 >

Options

3.1 HDMI, DVI-D, S-Video + BNC

3.2 DC Power : 12V / 24V / 48V / 125V / 250V

P.13
P.14

< Part. 2 >

Specif cations / OSD

2.1 Product Specifi cations

2.2 Keyboard / Mouse Specifi cations

2.3 On-screen Display Operation ( OSD )

P.8 - 9
P.10
P.11 - 12

< Part. 1 >

RM-111-17 / 19

1.1 Package Content

1.2 Structure Diagram & Dimension

1.3 Installation

1.4 Connection

Contents

P.1
P.1 - 2
P.3 - 5
P.6 - 7

< Part. 4 >

KVM Integration

P.15

UM-CV-751-Q217V3 www.UDFNPRXQWVDOes.com

■ It is very important to mount the equipment in a suitable cabinet or on a stable surface.

■ Make sure the place has a good ventilation, is out of direct sunlight, away from sources of excessive

dust, dirt, heat, water, moisture and vibration.

The equipment comes with the standard parts shown in package content. Check and make sure they are
included and in good condition. If anything is missing, or damaged, contact the supplier immediately.

Unpacking

Before Installation

How To Clean Your LCD Monitor

Caution :

■ To avoid the risk of electric shock, make sure your hands are dry before unplugging your monitor from or

plugging your monitor into an electrical outlet.

■ When you clean your monitor, do not press down on the LCD screen. Pressing down on the screen can

scratch or damage your display. Pressure damage is not covered under warranty.

■ Use only cleansers made specifi cally for cleaning monitors and monitor screens. Cleansers not made to

clean monitors and monitor screens can scratch the LCD display or strip off the fi nish.

■ Do not spray any kind of liquid directly onto the screen or case of your monitor. Spraying liquids directly

onto the screen or case can cause damage which is not covered under warranty.

■ Do not use paper towels or abrasive pads to clean your monitor. Using an abrasive pad or any wood based

paper product such as paper towels can scratch your LCD screen.

Cleaning Your Monitor

To clean your LCD safely, please follow these steps :

Disconnect the power cord.

Gently wipe the surface using a clean, dry microfi ber cloth. Use as little pressure as possible.

1

2

Cleaning Tough Marks and Smudges

To remove tough marks and smudges, please follow these steps :

Disconnect the power cord.

Spray a small amount of non-abrasive cleanser on a microfi ber cloth.

Gently wipe the surface. Use as little pressure as possible.
Wait until your monitor is completely dry before plugging it in and powering it up.

1

2

Caution : Do not spray or apply any liquids directly onto the monitor. Always apply the solution to your
microf ber cloth f rst, not directly on the parts you are cleaning.

3

4

UM-CV-751-Q217V3 www.UDFNPRXQWVDOes.com

RM-111-17 or 19 unit X 1

- CB-6 6ft VGA console cable X 1
( Alternative for PS/2 KB / MS : CE-6 6ft Combo KVM cable )

- Power cord X 1

- M6 screw, cage nut & cup washer X 8

6

1

2

5

LCD interchangeable module kit
Installation Slides
LCD membrane
Membrane switch (KVM option)
Micro switch for screen auto power off

1

2

3

6

7

7

8

Keyboard interchangeable module kit
Mouse interchangeable module kit
Blue Power LED
Front USB port for device access ( USB Hub KVM only )
Molded front handle

4

3

8

9

10

4

10

5

9

The above package content is only for the single console models.
It varies with options such as KVM, HDMI, DVI-D, AV & DC power.

< 1.1 > Package Content

P.1

< Part 1 >

< 1.2 > Structure Diagram

RM-111-17 / 19

UM-CV-751-Q217V3 www.UDFNPRXQWVDOes.com

< 1.2 > Dimension

Model

Product Dimension

(W x D x H)

Packing Dimension

(W x D x H)

Net

Weight

Gross

Weight

RM-111-17

441.6 x 460 x 44 mm

17.4 x 18.1 x 1.73"

590 x 808 x 140 mm

23.2 x 31.8 x 5.5”

12 kg

26 lb

16.6 kg

36.5 lb

RM-111-19

441.6 x 500 x 44 mm

17.4 x 19.7 x 1.73"

590 x 808 x 140 mm

23.2 x 31.8 x 5.5”

12.7 kg

27.9 lb

17.3 kg

38.1 lb

The weight is only for the single console models. It varies with accessories & options
such as KVM, HDMI, DVI-D,

AV & DC power.

P.2

Front View

Side View

UNIT : mm

1mm = 0.03937 inch

Top View

Power

VGA

Rear View

UM-CV-75-Q217V3 www.rackmountsales.com

■ Fix the LCD console drawer into the rack.

Complete the installation

Step

3

■ Insert the left and right rear mounting brackets into

the LCD console drawer.

Step

1

< 1.3 > Installation - Installation Slides

P.3

Step

2

■ Measure the depth of the front and rear mounting rails.

■ Align each rear mounting bracket to a suitable length.

M6 screw, cage nut & cup washer x 8 are provided.

UM-CV-751-Q217V3 www.rackmountsales.com

■ Fix the LCD console drawer to the mini brackets

with 6#32*4.5 mm screw x 8.

■ Installation completed

This step is necessary for front.
Failure to complete this will cause damage.

Step

■ Insert the drawer into the mini brackets.

Right bracket

< 1.3 > Installation - ORB-2.1 2-Post Rack Mounting Brackets ( Option )

Step

1

■ Before apply 2-post rack brackets, please release

front mounting ears and rear mounting wheels.

■ Attach left and right mounting brackets to the

drawer with the screws below :
6#32*3.5 mm screw x 8 ( only for front )

6#32*4.5 mm screw x 6 ( only for rear )

Step

2

■ Attach the set of 4 mini brackets to the 2-post rack.

■ M6 screw set is not provided.

Step

3

Left bracket

fl at head screw
6#32*4.5mm x 3

round head screw
6#32*3.5mm x 4

M6 screw
set x 8

Step

4

fl at head screw
6#32*4.5mm x 2

fl at head screw
6#32*4.5mm x 2

Round head screw only for front

P.3P.4

Apply if
necessary

UM-CV-751-Q217V3 www.rackmountsales.com

P.5

■ Hold the handle and slide out the

drawer.

■ Operate the LCD console drawer.

■ Flip up the LCD to a suitable angle.

< 1.3 > Installation- How to use the drawer

UM-CV-751-Q217V3 www.rackmountsales.com

KVM

LCD Console Drawer

KVM

LCD Console Drawer

USB server

P.6

< 1.4 > Connection to USB Server via CB-6 cable

< 1.4 > Connection to external KVM via CB-6 cable

Caution : The LCD console drawer is hot-pluggable, but components of connected devices, such

as the servers and KVM switch, may not be hot-pluggable. Plugging and unplugging cables while
servers and KVM are powered on may cause irreversible damage to the servers, KVM and LCD
console drawer. Before attempting to connect anything to the LCD console drawer, we suggest
turning off the power to all devices. Apply power to connected devices again only after the LCD
console drawer is receiving power. The company is not responsible for damage caused in this way .

VGA
console cable

USB console KVM

VGAUSB

USB VGA

CB-6 VGA
console cable

UM-CV-751-Q217V3 www.UDFNPRXQWVDOes.com

P.7

KVM

Combo
KVM cable

KVM

PS/2 server USB server

Combo
KVM cable

LCD console drawer LCD console drawer

< 1.4 > Connection to PS/2 or USB Server

< 1.4 > Connection to external KVM via cable

Caution : The LCD console drawer is hot-pluggable, but components of connected devices, such

as the servers and KVM switch, may not be hot-pluggable. Plugging and unplugging cables while
servers and KVM are powered on may cause irreversible damage to the servers, KVM and LCD
console drawer. Before attempting to connect anything to the LCD console drawer, we suggest
turning off the power to all devices. Apply power to connected devices again only after the LCD
console drawer is receiving power. The company is not responsible for damage caused in this way .

Combo
KVM cable

Combo
KVM cable

PS/2 console KVM

LCD console drawer LCD console drawer

USB console KVM

KVM KVM

RM-111-17 / 19

UM-CV-751-Q217V3 www.UDFNPRXQWVDOes.com

LCD
Panel

R017 R019

Manufacturer
Panel Size ( diagonal ) 17-inch TFT color LCD 19-inch TFT color LCD
Display pixel ( dots x lines ) 1280 x 1024 1280 x 1024
Brightness ( typ. ) 250 250
Contrast Ratio ( typ. ) 1000:1 1000:1
Color 16.7 M 16.7 M
Viewing Angle ( L/R/U/D ) 85/85/80/80 85/85/80/80
Response Time ( ms ) 5 5
Dot pitch ( mm ) 0.264 0.294
Display Area ( mm ) 337.92H x 270.33V 376.32H x 301.06V
Surface treatment Haze 25%, Hard-coating
Surface hardness 3H 3H
Backlight Type LED LED
MTBF ( hrs ) 30,000 30,000

Video
Connectivity

Digital HDMI HDMI 1.2, CEA-861-D

DVI DVI-D, TMDS single link

Analog

VGA Analog 0.7Vp-p
Composite ( BNC ) NTSC & P AL

S-Video ( 4-pin ) NTSC & P AL
Plug & Play DVI / VGA VESA EDID structure 1.3
Synchronization VGA Separate, Composite & SOG

Power Power Supply Range Auto-sensing 100 to 240VAC,

50 / 60Hz

Power Consumption
for Single Console

Screen ON Max. 25W

Power saving mode Max. 4W

Power button OFF Max. 1W
Power Consumption

with KVM integration

Screen ON Max. 55W

Power saving mode Max. 34W

*For details, please refer to our KVM rear kit user manuals

Regulatory Safety cUL, FCC & CE certifi ed

Environmental RoHS2 & REACH compliant

< 2.1 > Product Specif cations

P.8

< Part 2 >

UM-CV-751-Q217V3 www.UDFNPRXQWVDOes.com

R017 / 19

Applicable
Format

VGA Input PC Signal 1280 x 1024 x 60 / 75Hz

1280 x 960 x 60Hz
1280 x 768 x 60 / 75Hz
1152 x 864 x 75Hz
1024 x 768 x 60 / 70 / 75Hz
848 x 480 x 60Hz
800 x 600 x 60 / 72 / 75Hz
720 x 400 x 70Hz
640 x 480 x 60 / 72 / 75Hz
640 x 400 x 70Hz
640 x 350 x 70Hz

HDMI Input

PC Signal Same as VGA
Video Signal

720p : 50 / 60Hz
480p : 60Hz

576p : 50Hz
Audio Signal 2ch Linear PCM ( 32 / 44.1 / 48 KHz )
Speaker Dual Stereo Speaker, 2 x 2W

P.9

Physical
Specif cation

R0175019

Product ( W x D x H )

441.6 x 460 x 44 mm 441.6 x 500 x 44 mm

17.4 x 18.1 x 1.73 inch 17.4 x 19.7 x 1.73 inch

Packing ( W x D x H )

590 x 808 x 140 mm 590 x 808 x 140 mm

23.2 x 31.8 x 5.5 inch 23.2 x 31.8 x 5.5 inch
Net Weight 12 kgs / 26 lbs 12.7 kgs / 27.9 lbs
Gross Weight 16.6 kgs / 36.5 lbs 17.3 kgs / 38.1 lbs

Environmental
Conditions

Operating Temperature 0 to 55°C degree

Humidity 20~90%, non-condensing
Altitude 16,000 ft

Storage / Non-operating

Temperature -20 to 60°C degree
Humidity 5~90%, non-condensing
Altitude 40,000 ft
Shock 10G acceleration (11ms duration)
Vibration 5~500Hz 1G RMS random

UM-CV-751-Q217V3 www.UDFNPRXQWVDOes.com

< 2.2 > Keyboard / Mouse Specif cations

WE keyboard integrated with trackball

Wb

Supporting layouts

America

United States

EMEA

United Kingdom Germany France Spain Norway

Italy Russia Switzerland Netherlands Portugal

Asia

China Japan Korea Arabia Turkey

WS keyboard integrated with touchpad

WS

P.10

Key force 55 ± 5g
Travelling distance 3 ± 0.3mm
Switch life > 10 million life cycle time
OS support Windows / Linux / Unix / Mac OS

UM-CV-751-Q217V3 www.UDFNPRXQWVDOes.com

R017 / 19

Exit the OSD screen
Go back to the previous on-screen sub-menu or
main menu

Scroll through menu options and adjust
the displayed control

Display the OSD menu
Act as an Enter key to select screen setting options

Turn the monitor on or off

Membrane Switch Function

Remark : All LED touch buttons in WHITE light.
The LED of Power touch button will fl ash continuously when there is no signal input.

All the LED touch buttons will automatically turn off after 10 minutes of idle status ( except the Power ).

Light up all membrane buttons, please press any button for 1 - 2 seconds ( except the Power ).

1

2

P.11

< 2.3 > On-screen Display Operation ( OSD )

UM-CV-751-Q217V3 www.UDFNPRXQWVDOes.com

< 2.3 > On-screen Display Operation ( OSD )

P.12

OSD Conf guration Page

Image:

for the brightness, contrast, color temp, red, green, and blue

Geometry:

for the auto adjust, H position, V position, phase and clock

Video:

for the colour, tint, sharpness, noise reduction, DCDi and TV Setup

Audio:

for volume, bass, treble, balance, AVL and mute

Misc:

for the language, OSD position, graphic mode, ratio, reset and timer

UM-CV-751-Q217V3 www.UDFNPRXQWVDOes.com

R017 / 19

( DVI-D TMDS single link )

( HDMI 1.2, CEA-861-D )

- AV

- DVI-D

- HDMI

( S-Video + Composite, BNC )

< 3.1 > Options :

< Part 3 >

Power

KVM

DVI-DHDMI

S-Video BNC

( 1 ) Either HDMI or DVI-D can be selected.

( 2 ) In some circumstances, if the user connects the LCD to PC via HDMI port for video and audio
signals, the LCD may display incorrectly on a full screen. If so, please adjust the display card
setting on display size to f x the issue.

( 3 ) For the above options, RKP117 depth will be extended from 460mm ( 18.1" ) to 530mm ( 20.9" )
and RKP119 depth will be extended from 500mm ( 19.7” ) to 570mm ( 22.4” )

P.13

UM-CV-751-Q217V3 www.UDFNPRXQWVDOes.com

( 1 ) If the unit with LCD, earthing may be required

( 2 ) DC option excludes AC power adapter and power cord.

( 3 ) RKP117 depth will be extended from 460mm ( 18.1” ) to 530mm ( 20.9” )

( 4 ) RKP119 depth will be extended from 500mm ( 19.7” ) to 570mm ( 22.4” )

For DC power option :

***

< 3.2 > Options : DC Power

Model 12V 24V 48V 125V 250V

Input rating

Input voltage: 12-Volt 24-Volt 48-Volt 110-Volt 300-Volt
Input range: 9 ~ 18V 18 ~ 36V 36 ~ 75V 66 ~ 160V 180 ~ 425V
Input current

- No load 50 mA 50 mA 50 mA 35 mA 10 mA

- Full load 4950 mA 2450 mA 1220 mA 749 mA 600 mA

Output rating

Output voltage: 12-Volt 12-Volt 12-Volt 12-Volt 12-Volt
Output current: 4.16A 4.16A 4.16A 6.25A 12.5A

Eff ciency 84% 85% 85% 91% 86%

DC power

KVM

P.14

UM-CV-751-Q217V3 www.rackmountsales.com

The company reserves the right to modify product specifi cations without prior notice and assumes no responsibility
for any error which may appear in this publication.

All brand names, logo and registered trademarks are properties of their respective owners.