INSTRUCTIONS MANUAL
THX-T3
THX-B1
THX-ST
THX-C
THX-D
THX-10SUB
THX-10SUBt
THX-12SUB
3
1. Introduction
Congratulations!!!
Crystal Audiovideo Ltd., the manufacturer of Crystal Audio
and Crystal Audiovideo products, introduces Crystal Acoustics,
a new brand for the USA and Canada.
Your new speakers, built to the highest standards,
meet all the technical requirements for state-of-the-art
sound reproduction. Our THX Select Subwoofers will bring
ultimate bass performance to your home entertainment system.
INDEX
Precautions ..........................................................................................................................................2
1. Introduction......................................................................................................................................3
1.1 THX Select Certified Products ..........................................................................................................4
1.2 THX Select Certified Speaker Features..............................................................................................4
1.2.1 THX Select Certified Systems........................................................................................................5
2. Positioning your THX Surround Sound Speakers ............................................................................6
2.1 Front Speakers ................................................................................................................................7
2.1.1 Placement of THX-T3 Front Tower Speakers ................................................................................7
2.1.2 Placement of THX-Center Speaker ................................................................................................7
2.2 Surround Speakers ..........................................................................................................................8
2.2.1 Placement of THX-Dipole Surround Speakers................................................................................8
2.2.2 Placement of THX-Surround Speakers ..........................................................................................8
2.3 THX-12SUB, THX-10SUB and THX-10SUBt Subwoofers ..................................................................9
2.3.1 Multiple Subwoofers ....................................................................................................................9
3. THX-System Speakers Connections ..............................................................................................10
4. THX-12SUB, THX-10SUB and THX-10SUBt Controls......................................................................11
5. Subwoofer Installation Guide ........................................................................................................12
6. Troubleshooting ............................................................................................................................13
6.1 No sound from THX-SUB ..............................................................................................................13
6.2 Boomy, dull, out of focus low frequencies ....................................................................................13
6.3 50/60 cycle hum coming from the subwoofer................................................................................13
7. Specifications ................................................................................................................................13
8. Room Acoustics Designer
®
(Loudspeaker Placement Interactive Software)......................................14
9. Home Theater Handbook - Sales and Buyer's Guide ....................................................................15
Ensure your receiver or multichannel amplifier is switched off before connecting speakers
Before powering the subwoofer make sure the local operating voltage is the same as that specified for your unit
Turn subwoofer off before connecting the input cable
Be sure to connect plus (+) and minus (-) terminals of the speakers' binding posts to the corresponding plus (+)
and minus (-) terminals of the receiver or multichannel amplifier
Make sure that all connections are secure, especially if using bare speaker wires
Contact between stray bare wires between plus (+) and minus (-) terminals may cause a damaging short-circuit
Avoid using equalizers that may add distortion
Your THX Select Certified speakers are built to tightly controlled tolerances and specifications so dispersion
and frequency response are optimized by design, even at high output levels
There is risk of damaging your speaker drivers with low-power amplifiers operating at or near their power limits
Clipping can destroy individual drivers, usually the tweeter
That's why all Crystal Acoustics speakers feature Electronic Tweeter Protection
Receivers and multichannel power amplifiers of at least 80 WRMS are recommended
Do not drive speakers with continuous power exceeding the maximum indicated in the instruction manual
for each speaker model (See Specifications Section 6.)
Use the best quality speaker cables and interconnect possible
Connect speakers cables to the upper pair of binding posts when single-wiring and let the jumper links take
the signal to the lower frequency drivers
Do not place loudspeakers in dusty or humid environments
Avoid exposure to direct sunlight
!
PRECAUTIONS
2
54
THX Select Certified Subwoofers Feature:
Flat anechoic response from 35Hz to 200Hz and accurate in-room response from 19Hz to 350Hz
Sturdy cabinet construction with internal bracing
The THX-10SUBt combines foundation-shaking bass power and furniture-grade cabinetry with
an attractive glass top
High quality, powerful built-in amplifiers
Long throw woofers with huge magnets for a deep and powerful bottom-end
Accurate bass performance to THX standards when using one THX-12SUB or two THX-10SUB
subwoofers
Power savings when subwoofer automatically switches to stand-by mode after 10 minutes of no input
Power consumption is very low In stand-by
The LED on the subwoofer's rear panel lights orange for stand-by, red for operational
Note: Power should be turned off when the subwoofer is unused for long periods of time
Automatic power on in stand-by when signal appears at the subwoofer's input
Switching the subwoofer off then on again also restores it to operation
1.2.1 THX Select Certified Systems
The Crystal Acoustics THX Speaker System:
Two THX-T3 floorstanders or THX-B1 for left and right front channels as found in all THX-Systems
One THX-Center channel speaker also used in all THX-Systems
Two THX-Dipole wall-mounted speakers for the surround channels
THX-Surround speakers for the surround channels
One THX-12SUB THX Select Certified Subwoofer
Or Two THX-10SUB or THX-10SUBt Subwoofers to meet THX Select Certified requirements
1.1 THX Select Certified Products
THX, the trademark of THX Ltd., is the ultimate set of standards for home theater sound. It incorporates a
series of patented electronic and loudspeaker specifications designed to bring the big theater experience
right into your home.
THX was indeed the first standard, but Lucasfilm THX realized their specification must adjust for differently
sized home entertainment environments. THX Select is their reference standard for smaller rooms, calibrated to define reference level performance in rooms of about 2000 square feet.
Visit www.thx.com for more information on THX and their innovative technologies.
1.2 THX Select Certified Speaker Features
Crystal Acoustics speaker systems, optimized for a stupendous, powerful and dynamic surround sound
presentation, still delivers nuanced, high performance multichannel music when required.
They feature:
Absolutely flat frequency response
Easy placement:
THX Bass Management specifications minimize interaction between speakers and the room bound
aries--i.e., walls, corners, etc.
Free Air Rotating Spherical Tweeter avoids diffraction effects improving high frequency performance
Avoids having to move the whole speaker to set the tweeters for the right balance between a big
coherent soundstage and image focus
Electronic protection for the tweeters
Wide horizontal dispersion characteristics for wideband flat frequency response throughout the room
Controlled vertical dispersion diminishes ceiling and floor reflections for superior air, soundstage,
and imaging focus
High sound levels and dynamics capability
High sensitivity means even a relatively low-power A/V receiver or multichannel amplifier can drive
them as long as they can support multiple 4 ohm loads
High power handling means they're safe to use with powerful A/V receivers or big multichannel
amplifiers
Dipole speakers: THX recommend dipole surround speakers to more faithfully reproduce the surround
effects of movie theaters
Wide dispersion characteristics accurately reproduces the sound of two rows of side-mounted speakers
Timbre matching: Your THX-System speakers have similar tonal characteristics because of similar or
identical crossover topology, smooth frequency response, and quality drivers
Full magnetic shielding: Your THX-System are fully shielded for safe placement as near the TV/video
display as needed
76
2.1 Front Speakers
The front L/R speakers are largely responsible for producing powerful dynamics, a textured midrange,
clear, accurate highs, plus soundstage imaging, stability and focus. THX technical specifications for front
and center speakers improve dialog intelligibility and support soundstage size and imaging in two ways:
Flat frequency response and wide horizontal dispersion characteristics assure off-axis listeners
enjoy surround effects as well as those in the middle
Controlled vertical dispersion lowers ceiling and floor reflections that muddy intelligibility,
soundstage integrity, and focus
2.1.1 Placement of THX-T3 Front Tower Speakers
Place front speakers equidistantly and slightly in front of the TV/video display
Measure the distance between the left and right front speakers
Measure the distance between the listening position and the midpoint between the front speakers
The difference should be no more than 15% of the L/R speaker distance
Angle the Spherical Tweeter Enclosures inwards towards the listening area.
Find the optimum tweeter angle that produces a wide yet focused soundstage
Adjust the speakers so the tweeters are at about ear height if possible
Move the speakers towards the wall to reinforce bass frequencies, and away to reduce them
Sometimes small changes can have a big result, so it's worth experimenting
Do not place them too far apart or you'll have a hole in the center of the soundstage
Do not place them too close together or the soundstage collapses into a fuzzy mono ball of
sound with no definition or separation
2.1.2 Placement of THX-Center Speaker
TV/Video Displays: Place the Center-THX directly above or below the screen,
whichever best points towards ear level
Projector Displays: Place the Center-THX behind or in front of the screen whether
it is acoustically transparent or not
2. Positioning your THX Surround
Sound Speakers
Your THX-System speakers are designed for high performance multichannel sound in a variety of listening
environments. They deliver powerful, engaging, you-are-there movie soundtracks, plus a nuanced,
detailed and dynamic musical presentation.
Follow these suggestions for best results:
All five speakers in a 5.1 system would ideally be equidistant from the listener. That way receivers
and processors wouldn't have to electronically time delay the sound from each speaker to arrive at the
listening area at same time.
Speaker output levels must be adjusted for equal output at the listening position.
Our new patented External Rotating Tweeter optimizes high frequency reproduction without having
to rotate the entire speaker cabinet
Turn the Free Air top-mounted Spherical Tweeters to point towards the listening area
Experiment by toeing the spherical tweeters inward and just outward of the listening position
for the best compromise between solid image focus and overall size of the soundstage
Figure 1: Speaker Configuration for 5.1 Systems
2.3 THX-12SUB, THX-10SUB and THX-10SUBt Subwoofers
Best positioning for one subwoofer can generally be found using the following suggestions:
Try placing the subwoofer close to the
listening position
Avoid positioning it equidistantly from
room boundaries like walls
Avoid positioning it near corners where
walls are not of solid construction
Corner placement may excite room
resonance resulting in boomy, muddy bass
Further experiment with speaker positioning;
place the subwoofer near your listening
position and play jazz with acoustic bass
and move around the room
Place the subwoofer where you hear the
deepest, best controlled and most articulate
bass frequencies.
2.3.1 Multiple Subwoofers
Two Subwoofers
Two subwoofers drive low frequencies more uniformly throughout the room because they:
Reduce resonant modes and standing waves
Extend bass response
Improves bass impact, slam, definition and control
Delivers higher sound pressure levels and superior dynamics for movies and multichannel music
Using two THX-10SUB or THX-10SUBt subwoofers brings the system up to THX Select Certified
specification
Place each subwoofer at the midpoint of the opposing wall
Four Subwoofers
Four THX-SUB subwoofers delivers stupendous, earth shattering bass to your home
entertainment system
Really pressurizes a room and improves low-frequency extension
Improves the power response almost everywhere in the listening area
Place each subwoofer at the four walls' midpoint
Figure 3: Placement of one subwoofer
8 9
2.2 Surround Speakers
Surround speaker placement depends on the audio format (5.1,7.1, etc.) and the speakers in use. Dipoles
create a diffused soundfield ideal for surround effects. It's preferred for best performance from THX Select
Certified systems.
Your THX-Dipole surround speaker provides Movie Theater sound as immersive and dynamically impressive as THX standards can make them. A dipole speaker "paints" the walls and ceiling with sound. There's
very little direct output toward the listener. The reflected sound off the room's walls and ceiling creates an
inviting, enveloping, experiential soundfield, immersing you directly into the movie experience. Once you
heard a properly set up system, it's hard to go back to anything else as it improves the entire experience
no matter what you're watching… or listening to.
2.2.1 Placement of THX-Dipole
Surround Speakers
The total of a speaker's radiated energy in all directions is called its power response. Your Crystal
Acoustics THX-Dipole surround speaker exhibits a
THX-mandated flat power response. The total energy radiated by a speaker--to the front, above, below,
behind, and to the sides--must together average a
flat response. Listeners anywhere in the soundfield
will enjoy surround effects
Mount your THX-Dipoles on the side walls
adjacent to the listening position about 2ft
(66cm) above ear height
2.2.2 Placement of THX-Surround Speakers
In some cases, on-wall dipoles aren't practical because of a room's layout. Just place another pair of
THX-Surround speakers behind the listening area for the same THX Select Certified home theater surround experience.
Place the THX-Surround Speakers slightly behind the primary listening position
Adjust them to face each other behind the seating area
Optionally, experiment by adjusting the speakers to point at an angle towards the back or side walls
The sound reflects off the walls before reaching the listening area which simulates the L/R speaker
arrays found in many movie theaters
Figure 2: Dipole placement
1110
4. THX-12SUB, THX-10SUB
and THX-10SUBt Controls
Your THX-SUB Subwoofer has three control switches on the back panel:
1. Operational Mode Switch o THX or Variable positions
THX position:
For one THX-12SUB, two THX-10SUB, or two THX-10SUBt subwoofers
Meets all required specifications for THX Select Certification
For one THX-10SUB or one THX-10SUBt
Meets all required specifications for THX Select Certification but amplifier gain is 4.5dB lower
Variable position: The THX-SUB operates under THX specifications except for the internal amplifier's gain.
You can change the output level in Variable mode with the Volume Control knob
2. Volume Control knob: Rotating increases or decreases the output sound level of your THX-SUB
when in Variable Mode
3. Phase switch: Controls the phase of the subwoofer's low frequency output
4. Choose between Normal and Reverse positions and stay with the one that produces the most powerful,
deepest and most controlled bass response in your room
1 POWER ON/OFF
Switch (always on
standby when ON)
and power indicator
2 VOLUME Control
3 PHASE Switch
4 MODE Switch
for THX and SUB
5 ÇEAT SINK
6 LOW LEVEL INPUT
Figure 5: Control layout
3. THX-System Speakers connections
Figure 4: Speaker
Connections
CAUTION:
All Equipment
Must Be
Powered Off
Before Making
Any Connections
Attach speaker cables to the binding posts on the rear panel of the speaker cabinets. Our biwiring terminals
allow a variety of connection methods.
1. Single Pair: For each channel, jumper links in place, connect the speaker cable's red positive (+) con-
nector to the red positive output binding post of your receiver or multichannel amplifier, and the black negative (-) connector to the black output terminal. Switching positive and negative on one channel's connections reduces bass output and creates ill-defined, bloated imaging. Once you hear the effect, it's easy to
recognize. Tip: Connect the speaker cable to the upper tweeter binding posts on the speaker, letting the
jumper links take the signal to the low frequency drivers for cleaner, more extended highs.
2. Biwire - Two Cables Per Side: Remove all jumper links for biwire operation! Attach another pair of
speaker cables between the speaker's low frequency output binding posts and your receiver or multichannel amplifier, keeping red and black polarity correct. Tip: Biwiring improves the resolution of low-level
details, the foundation of all high performance sound. Incorrect polarity will sound as above and interfere
with proper frequency response.
Make sure to use the correct set of receiver of multichannel output terminals for each speaker
Left and Right Front Speakers: Use the Left and Right Front output binding post terminals on your
receiver or multichannel amplifier to connect your THX-T3 floorstanding speakers
Center Channel Speaker: Use the Center output terminals on your receiver or multichannel amplifier
to connect the THX-Center speaker
Surround Speakers: Use two Surround output binding post terminals on your receiver or multichannel
amplifier to connect the two THX-Dipole speakers
1312
5. Subwoofer Installation Guide
The following instructions are for THX Certified as well as non-certified Dolby Digital/DTS A/V
receivers or surround processors.
1. Turn off your receiver or multichannel amplifier and make sure the THX-SUB is off
2. Use high quality shielded interconnect with RCA connectors to link the THX-SUB to the output
of your receiver or multichannel amplifier
3. Set the Operational Mode switch on your THX-SUB to the THX position
4. Set the Phase switch to Normal
5. Turn on your system and the THX-SUB
6. Navigate to the Speaker Setup menu of your receiver or processor to calibrate channel level
and size of your front, center and surround speakers
7. Set your main and surround speakers to Small on your receiver or processor
8. Set the roll off point to the following:
80Hz (THX standard) for THX Select loudspeakers
120-150Hz for other small speakers (Crystal Acoustics Plasma, SmArt System and Super Baby series)
The higher the crossover, the better the power handling of your main speakers
11. Change the Phase Control of your THX-SUB between Normal and Reverse positions
12. Listen to music with prominent bass
13. Stay with the switch position that produces the fullest, deepest and tightest bass in your listening area
14. Use the pink noise test signal of your receiver, processor or Test-DVD
15. Take a seat at the main listening and viewing position
16. Use an SPL meter (C scale, slow) and calibrate the output sound level of each channel
(fronts, center, surrounds) plus your subwoofer so that all outputs levels are equal
17. When using a single THX-10SUB or THX-10SUBt subwoofer, you must increase the subwoofer
output level of your receiver or processor by 4.5dB to get the proper bass levels to meet
THX standards
18. Connection of multiple subwoofers to a receiver or processor with only one SUB/LFE output
can be accomplished with Y-adapters (RCA male to two RCA female connectors)
6. Troubleshooting
6.1 No sound from THX-SUB
Make sure your THX-SUB is plugged into an AC outlet
Make sure the LED on the back of the THX-SUB is on and lit red (operating) and not orange (stand-by)
Otherwise switch the subwoofer's power off then on again
Make sure the Subwoofer Y/N option is set to Yes in your receiver or processor's speaker setup menu
Make sure the Volume Control is not set to Minimum if the subwoofer's in Variable Mode
Make sure your subwoofer interconnect is functioning properly and replace any defective cables
6.2 Boomy, dull, out of focus low frequencies
Try moving your subwoofer away from corners or walls in small steps
The boom results from exciting room resonances
Small changes in position can make a big difference
6.3 50/60 cycle hum coming from the subwoofer
Your THX-SUB is reproducing ground loop hum from elsewhere in your system
Make sure interconnect and speaker cables are routed away from AC power cords and component
power supplies to avoid induced hum
Cross interconnects at 90 degrees to AC power cords and keep them separated by at least an inch.
Also connect the power cord of your THX-SUB and receiver/processor and multichannel amplifier to the
same AC outlet to keep the grounds all at the same potential avoiding hum
7. Specifications
Model nam
THX – T3 THX - SURROUND THX - DIPOLE THX - B1 THX - CENTER THX-12SUB THX-10SUBt THX-10SUB
CROSSOVER TYPE
31/2-way 2-way 2-way 2-way 2-way THX/Variable THX/Variable THX/Variable
MAGNETICALLY SHIELDED
WOOFER 6.5’’ 3 1 1 1 1
WOOFER 12’’
WOOFER 10’’
TWEETER 1’’ NEODYMIUM MAGNET
11 211
POWER (Wrms) 180 100 100 100 100 200 120 120
MAXIMUM POWER (Watt) 350 200 200 200 200
SENSITIVITY (dB/W/m) 92 88 88 89 89 93 92 92
IMPEDANCE (Ohm) 4 8 8 4 4 4 4 4
FREQUENCY RESPONSE (Hz - kHz) 35-22k 35-22k 45-22k 45-22k 45-22k 20-350 20-350 20-350
BASS REFLEX
BI-WIRE GOLD PLATED BINDING POST
FRONT DIMENSIONS DxHxW (mm)
165x1200x160 165x1030x160 310x330x140 165x370x230 530x165x170 470x470x350 470x470x310 470x470x310
15
14
Room Acoustics Designer
®
(Loudspeaker Placement Interactive Software)
Room Acoustics Designer®is a unique interactive software package developed by Crystal
Acoustics that offers several loudspeaker
placement
solutions based on input from the user.
It easily guides you through to optimal
placement of your multichannel home
theater speakers.
HOME
THEATER
HANDBOOK
"The Salesman's
& Buyer's Guide"
This book offers all required
information to make an educated
selection of components and
avoid the pitfalls of outdated
or inappropriate components.
Our handbook is a treasure chest
of information and descriptions
of the latest technologies and
their impact.
It includes:
An innovative
training system
Over 350 Questions
and Answers
Many Frequently Asked
Questions with
Answers (FAQ's)
Over 100 color drawings
and photos
The advantages
of Room Acoustics
Designer®are:
Takes into consideration
furnishings, their location, and the
dimensions and placement of the
TV or video display
Offers suggestions using a friendly
graphical user interface
Change the seating position and
a new series of suggestions are
displayed
Room Acoustics Designer®
is patented software,
accessible free of charge
at Crystal Acoustics' website:
http://www.crystal-acoustics.com
THX® Certification assures the finest picture and sound quality for cinemas,
mixing studios, home theatres and DVDs.
THX Ltd. was established by George Lucas to ensure that the entertainment
consumer experienced music and films as the director intended.
THX is a trademark or a registered trademark of THX Ltd. All rights reserved.
Loading...