RS112 Rugged Server
RS112 Rugged Server User Guide
The most trusted provider for operational, deployable, and high reliability computing applications.
CRYSTAL GROUP INC.
©2015 BY CRYSTAL GROUP INC. ALL RIGHTS RESERVED.
ISO 9001:2008 &
AS9100C:2009 CERTIFIED QMS
DOC-00224 REV D
RS112 Rugged Server
RS112 Rugged Server
Contents
After selecting a hyperlink, choose ALT and to jump back to original cursor position.
SAFETY 4
CONTACT INFORMATION 6
PRODUCT INFORMATION 7
INSTALLING THE PRODUCT 9
OPERATING THE PRODUCT 14
MAINTAINING THE PRODUCT 15
RS112 Rugged Server User Guide Page 1 of 26
CONTENTS 1
ADVISORIES 4
HANDLING PRECAUTIONS 5
BATTERY DISPOSAL 5
CUSTOMER SERVICE 6
TECHNICAL SUPPORT 6
OVERVIEW 7
IDENTIFYING THE SERVER TYPE 7
SPECIFICATIONS 7
GROUNDING 9
RACK MOUNTING PRECAUTIONS 9
INSTALLING IN AN EQUIPMENT RACK 10
CONNECTING TO THE POWER SOURCE 14
POWERING THE SERVER ON 14
DRIVER UPDATES 15
CHASSIS ACCESS 15
EXPANSION/RISER
CARD
REMOVAL
AND
REPLACEMENT
18
HARD
DRIVE
REMOVAL
AND
REPLACEMENT
20
MEMORY REMOVAL AND REPLACEMENT 21
CHASSIS VIEWS 16
RS112 Rugged Server
AVAILABLE WARRANTY 24
LEGAL INFORMATION 25
COPYRIGHTS AND TRADEMARKS 26
CERTIFICATIONS AND LICENSES 26
RS112 Rugged Server User Guide Page 2 of 26
TROUBLESHOOTING
CRYSTAL GROUP LIMITED WARRANTY 24
DISCLAIMERS 26
23
RS112 Rugged Server
We Thank You!
From all of us at Crystal Group Inc., THANK YOU for your purchase of the RS112. Our
customers are the lifeline that keeps Crystal going. That is why it is extremely important
to us that our customers are 100% satisfied with their product choice.
Crystal products are designed to provide superior performance and reliability in the
harshest environments. Our company is ISO-9001:2008 and ASC9100C:2009 certified
QMS to show that we are dedicated to providing high quality products to our
customers.
We are confident that this server will meet or exceed your expectations for what a
rugged industrial/military computer server should accomplish. If you have any questions
or concerns, please contact us at one of the options listed in the Contact Information
section on page 6.
RS112 Rugged Server User Guide Page 3 of 26
Safety
Any service should be performed by qualified service personnel. Carefully follow all
advisories and instructions in this guide to avoid causing any bodily injury or damage
to the unit. This product does not contain any user serviceable parts. Overcurrent
protection for the system power must be provided from the installation location.
ADVISORIES
Three types of advisories are used throughout this guide to emphasize important
information or to warn of potential hazards to the user or equipment. These advisories
each have a specific icon that will stand for one of the following: Note, Warning or
Caution. An example of each is shown below:
NOTE
A note indicates important information that helps make better use of the equipment.
RS112 Rugged Server
WARNING
A warning indicates a potential for property damage, personal injury, or death.
CAUTION
Caution indicates potential damage to hardware or loss of data if instructions are not
followed.
RS112 Rugged Server User Guide Page 4 of 2
RS112 Rugged Server
HANDLING PRECAUTIONS
This product has components that may be damaged by electrostatic discharge (ESD).
Electrostatic Discharge (ESD)
To protect the equipment from electrostatic discharge, observe the following
precautions when handling or storing the RS112 or its components:
1.
Always use a grounded wrist strap at the workstation or ground frequently by touching
the metal chassis of the system before handling any components. The chassis must be
connected to an earth ground.
2.
Use antistatic padding on all work surfaces.
3.
Avoid static-inducing carpet areas.
4.
Keep the electronic components in its static shield bag until ready to perform installation
or after removing it from the server.
5.
Always handle the memory or expansion cards by the edges.
6.
Do not touch the input/output connector pins.
BATTERY DISPOSAL
The following applies to any battery that might be on any board installed in the RS112:
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type recommended by the manufacturer.
Dispose of used batteries according to the m instructions.
RS112 Rugged Server User Guide Page 5 of 26
RS112 Rugged Server
Contact Information
highly trained technical support personnel are dedicated to the service and
support of Our technical personnel are acutely aware that downtime
experienced by a customer is a mission critical event. They excel at providing timely and
effective responses to any technical issues encountered in the field. Please contact us
with any questions or concerns by using one of the options below:
Customer Service Hours of Operation:
8:00 AM - 5:00 PM Monday through Friday Central Time.
Technical Support Assistance Availability:
7/24/365- 7 days a week; 24 hours a day; 365 days a year.
After hours messaging service is available with a less than 30-minutes response
time.
Within the United States: 800-378-1636
International Number: 1+319-378-1636
Email Address: support@crystalrugged.com
Request a Form Under Tech Support:
http://www.crystalrugged.com
For Up-to-the-minute Crystal Products Information: http://www.crystalrugged.com
RS112 Rugged Server User Guide Page 6 of 26
RS112
RS 1 1 2
Product Information
OVERVIEW
The Crystal RS112 is a compact one rack unit (R/U) computer in a (1U) high by
wide by deep chassis that is designed for use in a rack mount
enclosure (see section Installing the Product for more information) or used as a stand-
alone unit. The RS112 consists of an aluminum chassis/enclosure, a power supply, an
active motherboard, processor(s), BD/CD/DVD, memory, and storage.
IDENTIFYING THE SERVER TYPE
RS112 Rugged Server
Table 1. RS112 Identification
Rugged
Server
SPECIFICATIONS
1U
Rack
Units
The actual number and type of expansion slots available are motherboard dependent.
Mechanical
Height
Width
Depth
Weight
CPU
Intel® CPU architecture options from Intel Sandy Bridge
Embedded long life roadmap dual Hexa Core or dual Octa Core options
Electromagnetic Interference (EMI)
# of
expansion
slots in chassis
# of
drive
bays
(4.45 cm)
(45.1 cm)
(51.11 cm)
15-21 lbs (6.80-9.52 kg) (excludes vibe kit mods)
Environmental kits available for shock,
vibration, EMI and humidity.
RS112 Rugged Server User Guide Page 7 of 26
RS112 Rugged Server
Expansion Slots
Drive Options
Standard
Standard (can be combined with HDD option) One (1) CD/DVD (R/W) or Blu-ray
One (1) full-height, 0.75 length slot; combination
is configuration dependent
Two (2) removable SATA or SAS or HDD
Option
Cooling
Four (4) SATA or SAS HDDs
High speed, high volume fans (6 + 2 PS)
Thermostatically controlled
Mounting Options
Standard
Option 1 Fixed mount, front and rear
Option 2 Jonathan rails
Mounted on Delrin glides
Power Supply Options
Standard
Option
120/240 VAC w/PFC
24 VDC (MIL-STD kits not available with this
option)
System Board
X9DRL-iF, LGA2011 XEON, ATX, 2LAN1000, VGA,
1 PCI 3.3V, 4 PCI-E X8, 1 PCI-E X11, IPMI, IPKVM,
SATARAIDX9, SATA3X2
Military Standards
For a complete list of Military Standards visit the Crystal Group website at:
http://www.crystalrugged.com
(Locate product under the PRODUCTS selection).
Commercial Standards
Commercial standards are based on the National Electric Code (NFPA70- National Fire
Protection Association). Please visit the following link to learn more about the National Electric
Code standards:
http://www.nfpa.org
RS112 Rugged Server User Guide Page 8 of 26
RS112 Rugged Server
Installing the Product
GROUNDING
AC Version- to ensure a good earth ground, the RS112 should be used with a UL listed
three-conductor power cord connected to a three-conductor grounded power source.
DC Version- input installations- use only approved copper connectors.
Reliable Grounding- reliable grounding of rack mounted equipment should be
maintained. Particular attention should be given to supply connections other than direct
connections to the branch circuit (e.g., use of power strips). Please see Figure 5 on page
16 for an example image of a ground stud.
RACK MOUNTING PRECAUTIONS
To prevent bodily injury when mounting or servicing this unit in a rack, special
precautions must be taken to ensure that the system remains stable. The following
guidelines are provided to ensure personal safety:
If using an equipment rack, make sure to securely bolt the rack frame to the floor or
vehicle.
Elevated Operating Ambient Temperature- if installed in a closed or multi-unit rack
assembly, the operating ambient temperature of the rack contents may be greater than
room ambient. Therefore, consideration should be given to installing the equipment in
an environmentally compatible rack with the manufacturer's maximum rated ambient
temperature.
Reduced Air Flow- installation of the equipment in a rack should be such that the air flow
is not restricted.
Mechanical Loading- mounting of the equipment in the rack should be such that a
hazardous condition is not created due to uneven mechanical loading.
Circuit Overloading- consideration should be given to how the equipment will be
connected to a supply circuit and the effect that the loading of circuits might have on
overcurrent protection and supply wiring. Appropriate consideration of the equipment
ratings should be used when addressing this concern.
All electrical wiring should be in accordance with the National Electric Code, or prevailing
Military Standards.
RS112 Rugged Server User Guide Page 9 of 26
RS112 Rugged Server
Table
2.
Fixed Mounting Brackets
Parts List
ITEM DESCRIPTION
2 SCREW,
8-32 X 82D PHL FH, SS
3 SCREW,
PHIL TRUSS
HEAD 10-32 X 0.75"
4 SCREW,
PHIL TRUSS
HEAD 10-32 X
1
Not all chassis support
Fixed Mounts
INSTALLING THE PRODUCT IN AN EQUIPMENT RACK
Using Fixed Mounting Brackets
To install RS112 with fixed mounting brackets in an equipment rack, complete the
steps and see Figure 1 below:
1.
Line up eight holes on the sides of the rear mounting brackets with eight holes on the
sides of the RS112 chassis and secure to chassis with 16 (eight per side) 8-32 x 0
screws provided (see #2 in Figure 1).
It may not be possible to line up all holes. If more than three holes do not line up on
each side, please contact Technical Support.
Line up four holes on the front mounting ears at the desired level on the front of the
2.
equipment rack, and attach to the rack using four (two per side) 10-32 x 0 rack screws
provided (see #3 in Figure 1).
3.
Line up four holes on the rear mounting ears at the desired level on the rear of the
equipment rack, and attach to the rack using four (two per side) 10-32 x 0 rack screws
provided (see #4 in Figure 1).
MOUNTING EAR, EXTENDED SLOT
1
3
4
1
4
3
RS112 Rugged Server User Guide Page 10 of 26
2
3
Figure 1. RS112 with Fixed Mounting Brackets
Using Crystal Slides
Table
3. Crystal
Slides Parts
List
DESCRIPTION
1
FRONT
MOUNTING
EAR, SLIDE
2 REAR MOUNTING
EAR, SLIDE
3 GUIDEBAR,
T-
SLOT SLIDE
4 SCREW,
PHIL TRUSS
HEAD 10-32 X
5 SCREW,
PHIL TRUSS
HEAD 10-32 X
6 SCREW,
8-32 X FHD 82D, SS
To install RS112 with Crystal Slides in an equipment rack, complete the following steps
and see Figure 2 below:
1.
Loosen adjuster screws.
2.
Line up the top and bottom holes on the front & rear mounting ears at the desired level
of the equipment rack, and attach to the rack using four (two per side) 10-32 x 0.50 rack
screws provided (see #1, #2 and #5 in Figure 2).
3.
Tighten adjuster screws.
Line up the server side slots with the slides and gently push to install in the rack.
4.
5.
To secure the server when transporting or when extension of server is not necessary,
screw two 10-32 x 0 screws into the middle hole of the front bracket ears (see #1 and
#4).
RS112 Rugged Server
ITEM
Not all chassis support Crystal Slides
Figure 2. Crystal Slides
RS112 Rugged Server User Guide Page 11 of 26
RS112 Rugged Server
Using Jonathan Rails
To install RS112 with Jonathan Rails in an equipment rack, complete the following
steps below and see Figure 3 on the following page.
1.
Attach a bracket (see #6 in Figure 3) to the smooth side of the Jonathan rail that has four
or more holes in a row (see #9 in Figure 3). There are five slots on each bracket; when
attaching to the rail side with the row of holes, place the first screw in the second slit back
from the ear. Make sure the arrow marking is pointing downward.
2.
Slowly extend the rail to see the screw access hole that will allow attachment of the four
8-32 x 0.313 screws with four 8-32 X 0.344 keps nuts (see #10 in Figure 3). Place a screw
in the first hole and slide the rail to the next hole to insert a screw. Continue until all four
screws have been inserted. If the rail slides too far before placing a screw in one of the
holes, it may lock into position. Unlock rail by pressing down on the lock mechanism (see
# 11 in Figure 3).
3.
Rail should be fully extended after placing the four screws in the holes and securing to
the bracket.
4.
Set the appropriate length and attach two 8-32 x 0.313 screws with two kep nuts in the
two longer slits provided. Make sure the arrow marking is pointed downward. Keep rail
fully extended (see # 1 & 2 in Figure 3).
5.
Repeat steps 1-4 for the second rail.
6.
With rails fully extended, locate the four holes used to attach the rails to each side of the
server. Make sure the rails are positioned with the arrow markings pointed downward.
7.
Secure to the server using four 8-32 x 0.313 screws for each side.
8.
An assistant may be needed: Attach the server into the rack mount by installing eight
10-32 x 0.50 screws into the top and bottom holes of the bracket ears (two for front
right; two for front left; two for back right and two for back left bracket holes) (see # 3,
6, 7 in Figure 3).
9.
To secure the server when transporting or when extension of the chassis from the rack
mount is not necessary, screw two 10-32 x screws in the middle hole on the front
bracket ears (see #4 in Figure 3).
The images on the following page may not depict the product received.
RS112 Rugged Server User Guide Page 12 of 26
ITEM DESCRIPTION
Not all chassis
support
Jonathan
Rails
9
Extended
Views
7
5
Closed
Views
with Brackets
5
4
3
6
6
9
1
2
7
1
3
2
8
4
Figure
3.
Jonathan
Rails
Table 4. Jonathan Rails Parts List
1 SCREW, PHIL FHD 100D 8-32 X SS
2 KEPS NUT, 8-32 X HEAD STL
3 SCREW, PHIL TRUSS HEAD 10-32 X
4 SCREW, PHIL TRUSS HEAD 10-32 X
5 SLIDE RAILS, LOCKING, JONATHAN 128QD-20
6 BRACKET, RH, RACK MOUNT
7 BRACKET, LH, RACK MOUNT
8 ARROW MARK (2 ON EACH RAIL)
9 ROW OF HOLES (ATLEAST 4 ON EACH RAIL)
10 SCREW ACCESS HOLE (1 ON EACH RAIL)
11 LOCK MECHANISM (1 ON EACH RAIL)
12 LOCK MECHANISM (2 ON EACH RAIL)
13 FOUR HOLES (2 ROWS OF 2- 4 ON EACH RAIL)
RS112 Rugged Server
RS112 Rugged Server User Guide Page 13 of 26
RS112 Rugged Server
Operating the Product
If the RS112 is part of a rack configuration, refer to the rack guide for more
information on connecting to a power source.
CONNECTING TO A POWER SOURCE
Please see Installing the Product on page 9 for more information.
POWERING THE SERVER ON
After securely attaching the power connection, press the Power On/Off switch which will
be located on either the front or the back of the chassis depending on the specific
configuration. A blue LED will illuminate when power is applied (see Figure 4, page 16
for location of power switch and more information about the RS112 chassis).
RS112 Rugged Server User Guide Page 14 of 26
RS112 Rugged Server
Maintaining the Product
Only qualified service personnel should attempt to open the RS112 chassis. There
are not any user serviceable parts inside.
To protect the equipment from Electrostatic Damage (ESD), follow the proper
precautions at all times when handling the RS112 and its components. Please see
Electrostatic Discharge section on Page 5.
DRIVER UPDATES
Contact Technical Support at one of the options listed on page 6.
CHASSIS ACCESS
Removing the Cover
1.
Ensure the RS112 is powered off and the unit is disconnected from the power source.
2.
Remove the screws connecting the top cover to the chassis using a Phillips screw driver.
3.
Lift the cover to expose the interior of the chassis.
RS112 Rugged Server User Guide Page 15 of 26
POWER
LED
DRIVE BAY 1
USB 1
POWER
SWITCH
2 BD/CD/DVD
POWER
GROUND
WITH
WINGNUT
CHASSIS VIEWS:
RS112 Rugged Server
DRIVE BAY
Figure 4. Front View RS112
INPUT
I/O PORTS
STUD
SLOT
Figure 5. Rear View RS112
The images above may not depict the product received.
RS112 Rugged Server User Guide Page 16 of 26
RS112 Rugged Server
Input/output (I/O) Ports:
For detailed information about the X9 motherboard option included in the product, please review
the guide at the following link:
X9 User Guide
See chapter 2-5- Control Panel Connectors and I/O Ports, page 2-13 in document (page 37 in
Adobe PDF format).
RS112 Rugged Server User Guide Page 17 of 26
EXPANSION/RISER CARD REMOVAL AND REPLACEMENT
Installing a plug-in expansion card requires an appropriate riser card. Contact a Crystal
Sales Representative or Technical Support if the system does not include a riser card.
Removing and Replacing the Plug-in Expansion/Riser Card
Disconnect power source to prevent injury.
Installing a plug-in expansion/riser card requires opening the RS112 cover; removing the
card cage; inserting the card into the motherboard; replacing the card cage; and
disconnecting and reconnecting the appropriate connectors.
Do not force the card. Forcing the card may result in equipment damage. If it does not
slide into place, check the alignment and try again.
Please reference Figure 6 on the next page.
Steps:
1.
Turn the unit OFF and disconnect the unit from the power source.
2.
Remove the chassis cover (see Removing the Cover on page 15).
3.
The card cage is retained by three screws, two from the rear of the unit and one at the
end of the retention bar. Locate and loosen. Carefully slide card cage forward and lift
from chassis.
4.
Remove the corresponding expansion slot filler bracket if installed or remove card.
5.
Align the expansion card with the appropriate slot and press the expansion card in firmly.
Set the plug-in cards into the riser card and attach using the pan head screws supplied
with the filler plate.
6.
With the expansion card in place within the slot, install the screw and tighten to hold the
card in place.
7.
Re-attach card cage assembly to chassis with the three screws.
8.
Attach appropriate connectors.
9.
Replace chassis cover.
RS112 Rugged Server
RS112 Rugged Server User Guide Page 18 of 26
RS112 Rugged Server
CARD CAGE
RISER CARD ASSEMBLY
RETENTION
SCREW
CARD RETENTION
SCREW
CARD CAGE
SCREWS
RETENTION
BAR
Figure 6. RS112 Expansion/Riser Card Installation
The image above may not depict the product received.
RS112 Rugged Server User Guide Page 19 of 26
THUMBSCREW
HARD DRIVE REMOVAL AND REPLACEMENT
Removing and Replacing the Carrier/Hard Drive Assembly
The procedure below may be different depending on the explicit drive contained in the
product.
Steps:
1.
Power the system down (unless a drive controller supporting hot-swap has been
installed- contact Technical Support with any questions).
2.
Unscrew both thumbscrews on the face of the carrier to be removed (please see circled
area in Figure 7 below). If thumbscrews are too tight, use a flathead screwdriver to
loosen.
3.
Grasp the handle and pull the carrier/drive assembly straight out of the face of the
system.
4.
Remove the drive by removing the four Phillips head screws from bottom of the carrier
sled.
5.
Install replacement drive into carrier and secure with the four Phillips head screws (a
thread-lock solution is recommended).
6.
Re-install carrier/drive assembly into the system.
7.
Tighten thumbscrews to secure the drive.
8.
Reapply power to the server, rebuilding any RAID arrays as necessary.
RS112 Rugged Server
RS112 Rugged Server User Guide Page 20 of 26
Figure 7. Drive Removal and Replacement
The image above may not depict the product received.
RS112 Rugged Server
MEMORY REMOVAL AND REPLACEMENT
Removing and Replacing the Memory
Contact Crystal Technical Support before performing a memory upgrade. Use only
Crystal- approved memory for upgrades.
Disconnect power source to prevent injury.
Do not force the DIMM. Forcing the DIMM may result in equipment damage. Check the
alignment and keying before installing.
For population order see the motherboard guide received or contact Technical Support.
Steps:
1.
Turn the unit OFF and disconnect the unit from the power source.
2.
Open up chassis cover (see Removing the Cover in the Chassis Access section on page
15).
3.
If removal is required, locate the memory card area and open both DIMM release levers
by placing one finger on each lever and pushing outward. See Figure 8 on next page.
4.
The DIMM will lightly pop out of the slot. Remove the old DIMM.
5.
Check the orientation or key when adding new DIMM.
6.
Press the DIMM into its slot evenly on both ends until it clicks into place. The DIMM
release levers will snap into place.
7.
The DIMM is properly seated when the release levers have fully engaged.
RS112 Rugged Server User Guide Page 21 of 26
RS112 Rugged Server
DIMM KEY
RELEASE
LEVER
Figure 8. Installing Memory
RS112 Rugged Server User Guide Page 22 of 26
RS112 Rugged Server
Troubleshooting
CONTACT TECHNICAL SUPPORT
If any problems arise when using the RS112, please contact Technical Support at one of
the options listed on page 6. Before calling, please have the following information
available to help expedite assistance:
1.
Unit serial number
2.
Brief description of the problem
3.
Brief explanation of the steps already taken to isolate and resolve the problem
RS112 Rugged Server User Guide Page 23 of 26
RS112 Rugged Server
Available Warranty
CRYSTAL GROUP LIMITED WARRANTY
Seller warrants to the Buyer that the products manufactured by it will be free from defects in material and
workmanship under normal use and service for the time period specified herein. sole obligation
under this warranty shall be the repair or replacement of any part or parts which prove to be defective under
normal use and service within three (5) years from the date of delivery to the Buyer. To receive the benefits
of this warranty, the Buyer must return said allegedly defective part or parts to facility in Hiawatha,
Iowa, or other location specified by Seller, within the time period set forth above. A warranty extension
contract is available if purchased, potentially extending the coverage to ten (10) years. Terms and Conditions
of the extension period are dictated in a separate agreement. Customer bears the risk of loss or
damage of equipment in transit from Buyer to Seller. The Buyer shall also pay the costs of shipping and
handling for any service other than Standard Ground or Air Transportation from factory to
specified destination. Correction by Seller of the defects in the manner provided above shall constitute
a fulfillment of all liabilities of Seller with respect to this warranty. Buyer shall pay all costs of removal of
any part or parts and reinstallation thereof. sole liability under this warranty shall be either
(a) to repair or to replace, at option, the defective component in accordance with the above
procedure, or (b) if Seller reasonably determines that it is unable to resolve the defect by repair or
replacement, to refund the purchase price upon return of the defective item. The warranty period for repaired
or replaced components shall be the remainder of the original warranty period for the repaired or replaced
item. Specifically excluded from this warranty are any products not provided by Seller. Seller will however
provide the labor to remove, install, and test excluded products at facility (or a facility authorized by
Seller) to the extent that the Buyer agrees to purchase replacement parts or to the extent that an applicable
warranty replacement is available from the OEM of the part. Under no circumstances will this warranty apply
to any software products or preventative maintenance service.
THIS WARRANTY IS EXPRESSLY IN LIEU OF, AND BUYER EXPRESSLY WAIVES, ALL OTHER
WARRANTIES EXPRESSED OR IMPLIED BY STATUTE, USAGE, CUSTOM OF THE TRADE OR
OTHERWISE, INCLUDING THE WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR USE AND OF ALL OTHER OBLIGATIONS OR LIABILITIES ON PART. ANY
IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE IS
HEREBY EXPRESSLY EXCLUDED AND DISCLAIMED. SELLER NEITHER ASSUMES NOR
AUTHORIZES ANY OTHER PERSON TO ASSUME FOR IT, ANY OTHER OBLIGATION OR LIABILITY IN
CONNECTION WITH THE SALE OF THIS COMPUTER PRODUCT. WARRANTY SHALL NOT
APPLY TO THIS COMPUTER PRODUCT OR ANY PART THEREOF WHICH HAS BEEN SUBJECT TO
ACCIDENT, NEGLIGENCE, ALTERATION, ABUSE, OR MISUSE. THIS WARRANTY SHALL NOT APPLY
TO ANY PRODUCT FROM WHICH THE ORIGINAL SERIAL TAG HAS BEEN REMOVED. SELLER
MAKES NO WARRANTY WHATSOEVER IN RESPECT TO ACCESSORIES OR PARTS NOT SUPPLIED
BY SELLER. BUYER AGREES THAT SELLER SHALL NOT BE LIABLE FOR ANY PROXIMATE,
CONSEQUENTIAL, PUNITIVE, SPECIAL OR INDIRECT DAMAGES OF ANY AMOUNT DUE TO ANY
CAUSE, INCLUDING, WITHOUT LIMITATION, ANY LOST PROFITS, LOSS OF USE, COSTS OF DELAY,
ETC. BUYER FURTHER AGREES THAT SOLE AND EXCLUSIVE REMEDY AGAINST SELLER
FOR ANY CLAIM OF ANY KIND, INCLUDING BREACH OF WARRANTY, NEGLIGENCE, STRICT
LIABILITY IN TORT, OR PRODUCT LIABILITY, ANY DELAY IN MANUFACTURE OR DELIVERY OF
EQUIPMENT OR PRODUCT, OR FOR ANY FAILURE OF SELLER TO COMPLY WITH THIS
AGREEMENT SHALL BE THE REPAIR OR REPLACEMENT OF THE PRODUCTS AS PROVIDED
HEREIN. (REVISED DECEMBER
RS112 Rugged Server X9 User Guide Page 24 of 26
RS112 Rugged Server
Legal Information
THE SPECIFICATIONS AND INFORMATION REGARDING THE PRODUCTS IN THIS GUIDE ARE SUBJECT TO CHANGE
WITHOUT NOTICE. ALL STATEMENTS, INFORMATION, AND RECOMMENDATIONS IN THIS GUIDE ARE BELIEVED TO BE
ACCURATE BUT ARE PRESENTED WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED. USERS MUST TAKE FULL
RESPONSIBILITY FOR THEIR APPLICATION OF ANY PRODUCTS.
THE SOFTWARE LICENSE AND LIMITED WARRANTY FOR THE ACCOMPANYING PRODUCT ARE SET FORTH IN THE
INFORMATION PACKET THAT SHIPPED WITH THE PRODUCT AND ARE INCORPORATED HEREIN BY THIS REFERENCE.
IF UNABLE TO LOCATE THE SOFTWARE LICENSE OR LIMITED WARRANTY, CONTACT YOUR CRYSTAL
REPRESENTATIVE FOR A COPY.
NOTWITHSTANDING ANY OTHER WARRANTY HEREIN, ALL DOCUMENT FILES AND SOFTWARE OF THESE SUPPLIERS
ARE PROVIDED WITH ALL FAULTS. CRYSTAL AND ALL NAMED SUPPLIERS DISCLAIM ALL WARRANTIES,
EXPRESSED OR IMPLIED, INCLUDING, WITHOUT LIMITATION, THOSE OF MERCHANTABILITY, FITNESS FOR A
PARTICULAR PURPOSE AND NONINFRINGEMENT OR ARISING FROM A COURSE OF DEALING, USAGE, OR TRADE
PRACTICE.
IN NO EVENT SHALL CRYSTAL GROUP INC., OR ITS SUPPLIERS BE LIABLE FOR ANY INDIRECT, SPECIAL,
CONSEQUENTIAL, OR INCIDENTAL DAMAGES, INCLUDING, WITHOUT LIMITATION, LOST PROFITS OR LOSS OR DAMAGE
TO DATA ARISING OUT OF THE USE OR INABILITY TO USE THIS GUIDE, EVEN IF CRYSTAL OR ITS SUPPLIERS HAVE
BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
The following information is for FCC compliance of Class A devices: This equipment has been tested and found to comply with the
limits for a Class A digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and
can radiate radio-frequency energy and, if not installed and used in accordance with the instruction guide, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in
which case users will be required to correct the interference at their own expense.
The following information is for FCC compliance of Class B devices: The equipment described in this guide generates and may
radiate radio-frequency energy. If it is not installed in accordance with installation instructions, it may cause interference
with radio and television reception. This equipment has been tested and found to comply with the limits for a Class B digital device
in accordance with the specifications in part 15 of the FCC rules. These specifications are designed to provide reasonable
protection against such interference in a residential installation. However, there is no guarantee that interference will not occur in a
particular installation.
Modifying the equipment without written authorization may result in the equipment no longer complying with FCC
requirements for Class A or Class B digital devices. In that event, the right to use the equipment may be limited by FCC regulations,
and correction of any interference to radio and television communications may be required at the expense.
To determine whether the equipment is causing interference, turn the equipment off. If the interference stops, it was probably
caused by the Crystal equipment or one of its peripheral devices. If the equipment causes interference to radio or television
reception, try to correct the interference by using one or more of the following measures:
Turn the television or radio antenna until the interference stops.
Move the equipment to one side or the other of the television or radio.
Move the equipment farther away from the television or radio.
Plug the equipment into an outlet that is on a different circuit from the television or radio (that is, making certain the equipment and
the television or radio is on circuits controlled by different circuit breakers or fuses).
This Hardware Guide contains information to install, operate, maintain and use the referenced product(s) manufactured or
distributed by Crystal Group Inc.
The information contained in this document is provided for reference only. Crystal Group Inc. does not assume any liability arising
out of the application or use of the information or products described herein. This guide may contain or reference information and
products protected by copyrights or patents and it does not convey any license under the patent rights of Crystal Group Inc., nor the
rights of others.
Crystal and the Crystal Logo are trademarks of Crystal Group Inc. or its affiliates in the U.S. and other countries. Third party
trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership
relationship between Crystal and any other company.
RS112 Rugged Server User Guide Page 25 of 26
RS112 Rugged Server
COPYRIGHTS AND TRADEMARKS
THIS HARDWARE GUIDE IS COPYRIGHT © 2015 BY CRYSTAL GROUP INC. ALL RIGHTS RESERVED.
SUPER MICRO IS A REGISTERED TRADEMARK OF SUPER MICRO COMPUTER, INC.
DISCLAIMERS
NOT ALL CHASSIS SUPPORT JONATHAN RAIL ATTACHMENTS.
NOT ALL CHASSIS SUPPORT CRYSTAL SLIDES.
MEMORY REMOVAL AND REPLACEMENT SHOULD BE PERFORMED BY ONLY QUALIFIED SERVICE PERSONNEL IN ACCORDANCE
WITH SECTION MEMORY REMOVAL AND REPLACEMENT. CONTACT CRYSTAL TECHNICAL SUPPORT FOR ASSISTANCE BEFORE
PERFORMING THESE PROCEDURES.
ANY SERVICE SHOULD BE PERFORMED BY QUALIFIED SERVICE PERSONNEL. CAREFULLY FOLLOW ALL ADVISORIES AND
INSTRUCTIONS IN THIS GUIDE TO AVOID CAUSING ANY BODILY INJURY OR DAMAGE TO THE UNIT. THIS PRODUCT DOES NOT
CONTAIN ANY USER SERVICEABLE PARTS.
DUE TO SPECIFIC OR CUSTOMIZED PRODUCTS IMAGES PRESENTED IN THIS HARDWARE GUIDE MAY NOT DEPICT THE PRODUCT
THE CUSTOMER HAS RECEIVED.
CERTIFICATIONS AND LICENSES
EACH PRODUCT MANUFACTURED WITHIN CRYSTAL GROUP INC., IS MARKED WITH THE APPROPRIATE CERTIFICATION OR LICENSE
SYMBOLS THAT APPLY. IF THERE ARE ANY QUESTIONS ABOUT THE LICENSES AND/OR CERTIFICATIONS THAT CRYSTAL OBTAINS,
PLEASE CONTACT A CRYSTAL REPRESENTATIVE AT ONE OF THE OPTIONS LISTED ON THE CONTACT INFORMATION SECTION
LOCATED ON PAGE 6.
THANK YOU FOR YOUR BUSINESS.
RS112 Rugged Server User Guide Page 26 of 26
RS112 Rugged Server
RS112 Rugged Server
Loading...