Crydom Series HA60, Series HD60 Data Sheet

MODEL NUMBERS

AC CONTROL HA6025 HA6050 HA6090 HA60125
DC CONTROL HD6025 HD6050 HD6090 HD60125

OUTPUT SPECIFICATIONS

➀

Nominal Line Voltage (±10%) [Vrms] 600 600 600 600
Operating Voltage Range (47-63 Hz) [Vrms] 48-660 48-660 48-660 48-660

Max. Load Current ➂[Arms] 25 50 90 125
Min. Load Current, [mArms] 40 40 40 150
Transient Overvoltage [Vpk] 1200 1200 1200 1200
Max. Surge Current, (16.6ms) [Apk] 250 625 1,200 1,750
Max. On-State Voltage Drop @ Rated Current [Vpk] 1.7 1.7 1.7 1.7

Thermal Resistance Junction to Case (R

θJC

) [° C/W] 1.02 0.63 0.28 0.22

Maximum I2 t for Fusing, (8.3 msec.) [A2sec] 260 1,620 6,000 12,700

Max. Off-State Leakage Current @ Rated Voltage [mArms]

➆

5555

Min. Off-State dv/dt @ Max. Rated Voltage [V/µsec] ➁ 500 500 500 500
Max. Turn-On Time ➄ 1/2 Cycle (DC Input), 10.0 msec (AC Input)
Max. Turn-Off Time 1/2 Cycle (DC Input), 40.0 msec (AC Input)
Power Factor (Min.) with Max. Load 0.5 0.5 0.5 0.5

INPUT SPECIFICATIONS ➀ DC CONTROL AC CONTROL AC CONTROL

(D PREFIX) (A PREFIX)➃ (E SUFFIX)

Control Voltage Range 3-32 Vdc 90-280 Vrms (60Hz) 18-36 Vrms
Max. Reverse Voltage -32 Vdc --- ---
Max. Turn-On Voltage 3.0 Vdc 90 Vrms 18 Vrms
Min. Turn-Off Voltage 1.0 Vdc 10 Vrms 4.0 Vrms
Nominal Input Impedance See Note ➅ 60K Ohms 9.0K Ohms
Typical Input Current 2.0 mA➅ 2mA @ 120 Vrms, 4mA @ 240 Vrms 3mA @ 24 Vrms

GENERAL NOTES

➀All parameters at 25°C unless otherwise specified.
➁ Off-State dv/dt test method per EIA/NARM standard RS-443, paragraph 13.11.1
➂ Heat sinking required, for derating curves see page 2.
➃ 24 Vac Input option, E suffix.
➄ Turn-on time for random turn-on versions is 0.02 msec (DC Control Models).
➅ Input circuitry incorporates active current limiter.
➆ No internal snubber.

• Zero Voltage and Random
Turn-On Switching

• Panel Mount

• 1200V Blocking Capability

• 600Vac - the preferred

choice in Canada

FastFax Document No.159
SERIES HA/HD60. 041900
PAGE 1 OF 3

Featuring state-of-the-art Surface
Mount Technology, these SPST-NO
relays deliver proven reliability in the
most demanding applications.
Output consists of an SCR AC switch
and is available in zero-cross, random
turn-on (phase controllable) and ver-
sions with either AC or DC input (coil)
control.
Manufactured in Crydom’s ISO 9001
Certified facility for optimum product
performance and reliability.

Series HA60/HD60

25-125Amp • 600 Vac • AC Output

©2000 CRYDOM CORP, Specifications subject to change without notice.

• Integrated Overvoltage
Protection by Automatic
Self Turn-On (Suffix P)

For recommended applications and more information contact: 
USA: (800) 8 CRYDOM • [phone] •[phone] • fax [phone]
Crydom Corp, 9525 Chesapeake Drive, San Diego, CA 92123 • Email: [e-mail]
WEB SITE: http://www.crydom.com FASTFAX Product Information: [phone]
UK: (44)1202 857300 • fax [phone] Crydom International Ltd., Riverside House 
Brook Road, Wimborne, Dorset, England BH21 2BH, Email: [e-mail].
GERMANY: 0180 3000 506 • fax [phone] Crydom GmbH,
Gewerbegebiet Im Schachen, D-66687 Nunkirchen, Germany • Email: [e-mail]

GENERAL SPECIFICATIONS

Dielectric Strength 50/60Hz Input/Output/Base 4000 Vrms
Insulation Resistance (Min.) @ 500 Vdc 109Ohm
Max. Capacitance Input/Output 8 pF
Ambient Operating Temperature Range -40 to 80°C
Ambient Storage Temperature Range -40 to 125°C

MECHANICAL SPECIFICATIONS

Weight: (typical) 3.0 oz. (86.5g)
Encapsulation: Thermally Conductive Epoxy
Terminals: Screws and Saddle Clamps Furnished, Unmounted

APPROVALS

UL E116950
CSA LR81689
VDE 10143 UG

Crydom Heat Sinks offer excellent
thermal management and are per­fectly matched to the load current
ratings of Crydom panel mount
relays. Request Crydom’s Heat Sink
specification sheet for all the details.

FastFax Document No.159
SERIES HA/HD60. 053000
PAGE 2 OF 3

Series HA60/HD60

25-125Amp • 600 V ac • AC Output

©2000 CRYDOM CORP, Specifications subject to change without notice.

Screw Torque Requirements:

6-32 Screws - 10 in./lbs.,
8-32 and 10-32 Screws - 20in./lbs.
(Screws dry without grease.)

Fastons:

Single pair (up to 25A)
Double pair* (up to 50A).

*

Caution: User must connect to both pairs

.90

(22.9)

FASTON
TERMINAL
.187 X .032
(2 PLCS.)

BASE PLATE
.125 (3.2)

FASTON TERMINAL
.250 X .032 (2 PLCS.)

1.87

(47.5)

.78

(19.8)

2.30

(58.4)

1.70

(43.2)

.87 REF.

(22.2)

12

OUTPUT

43

INPUT

1.00

(25.4)

1.80

(45.7)

.45

(11.4)

1.10

(27.9)

MOUNTING
HOLE/SLOT

0.17 (4.3) DIA.

.90

(22.9)

FASTON
TERMINAL
.187 X .032
(2 PLCS.)

BASE PLATE
.125 (3.2)

FASTON TERMINAL
.250 X .032 (2 PLCS.)

1.87

(47.5)

.78

(19.8)

2.30

(58.4)

1.70

(43.2)

.87 REF.

(22.2)

12

OUTPUT

43

INPUT

1.00

(25.4)

1.80

(45.7)

.45

(11.4)

1.10

(27.9)

MOUNTING
HOLE/SLOT

0.17 (4.3) DIA.

All dimensions are in inches (millimeters)

AVAILABLE OPTIONS

E

24 VAC Input (18-36 Vac)
Example: HA6025E

F Faston Terminals (Up to 50 Amp Models)

Example: HD6050F

Input Status LED.

G

Agencies Approval Pending
Example: HD6050G
Note: Control Voltage Range 4.5-32Vdc
for DC Control Models.

P Internal Overvoltage Protection.

Relay Will Self Trigger Between
900-1200 Vpk. Not Suitable For
Capacitive Loads.
Agencies Approval Pending.
Example: HD6025P

-10 Random Turn-On (AC & DC Control)

Phase Controllable (DC Control)
Example: HD6090-10

Ordering System: Combination of the
suffixes should be made in the following order:
EFPG-10.
Example: HA6050EFPG-10

MOUNTING
HOLE/SLOT

0.17 (4.3) DIA.

BASE PLATE
.125 (3.2)

1.10

(27.9)

.45

(11.4)

OUTPUT

12

1.87

(47.5)

SOLID-STATE RELAY

INPUT

1.00

(25.4)

1.80

(45.7)

(43.2)

+--

34

2.30

(58.4)

1.70

6-32 TERMINAL
(2 PLACES)

8-32 TERMINAL

(2 PLACES )

.78

(19.8)

.90

(22.9)

For recommended applications and more information contact: 
USA: (800) 8 CRYDOM • [phone] •[phone] • fax [phone]
Crydom Corp, 9525 Chesapeake Drive, San Diego, CA 92123 • Email: [e-mail]

WEB SITE: http://www.crydom.com FASTFAX Product Information: [phone]
UK: (44)1202 857300 • fax [phone] Crydom International Ltd., Riverside House 
Brook Road, Wimborne, Dorset, England BH21 2BH, Email: [e-mail].
GERMANY: 0180 3000 506 • fax [phone] Crydom GmbH,
Gewerbegebiet Im Schachen, D-66687 Nunkirchen, Germany • Email: [e-mail]