Crydom Series HA, Series HD60 Data Sheet

S

eries

25-125

HA/HD

A

m

p

•

600 Vac - AC OUTPU

60

T

• Zero Voltage and Random

Turn-On Switching

• Panel Mount

• 1200V Blocking Capability

• 600Vac - the preferred

choice in Canada

• Integrated Overvoltage
Protection by Automatic
Self Turn-On (Suffix P)

MODEL NUMBERS

OUTPUT SPECIFICATIONS

Nominal Line Voltage (±10%) [Vrms] 600 600 600 600
Operating Voltage Range (47-63 Hz) [Vrms] 48-660 48-660 48-660 48-660
Max. Load Current ➂[Arms] 25 50 90 125
Min. Load Current, [mArms] 40 40 40 150
Transient Overvoltage [Vpk] 1200 1200 1200 1200
Max. Surge Current, (16.6ms) [Apk] 250 625 1,200 1,750
Max. On-State Voltage Drop @ Rated Current [Vpk] 1.7 1.7 1.7 1.7
Thermal Resistance Junction to Case (R
Maximum I2 t for Fusing, (8.3 msec.) [A2sec] 260 1,620 6,000 12,700

Max. Off-State Leakage Current @ Rated Voltage [mArms]
Min. Off-State dv/dt @ Max. Rated Voltage [V/µsec] ➁ 500 500 500 500
Max. Turn-On Time ➄ 1/2 Cycle (DC Input), 10.0 msec (AC Input)
Max. Turn-Off Time 1/2 Cycle (DC Input), 40.0 msec (AC Input)
Power Factor (Min.) with Max. Load 0.5 0.5 0.5 0.5

AC CONTROL HA6025 HA6050 HA6090 HA60125
D C CONTROL HD6025 HD6050 HD6090 HD60125

➀

) [˚ C/W] 1.02 0.63 0.28 0.22

θJC

➆

5555

Featuring state-of-the-art Surface
Mount Technology, these SPST-NO
relays deliver proven reliability in the
most demanding applications.
Output consists of an SCR AC switch
and is available in zero-cross, random
turn-on (phase controllable) and ver­sions with either AC or DC input (coil)
control.
Manufactured in Crydom’s ISO 9001
Certified facility for optimum product
performance and reliability.

INPUT SPECIFICATIONS ➀ DC CONTROL AC CONTROL AC CONTROL

Control Voltage Range 3-32 Vdc 90-280 Vrms (60Hz) 18-36 Vrms
Max. Reverse Voltage -32 Vdc --- ---
Max. Turn-On Voltage 3.0 Vdc 90 Vrms 18 Vrms
Min. Turn-Off Voltage 1.0 Vdc 10 Vrms 4.0 Vrms
Nominal Input Impedance See Note ➅ 60K Ohms 9.0K Ohms
Typical Input Current 2.0 mA➅ 2mA @ 120 Vrms, 4mA @ 240 Vrms 3mA @ 24 Vrms

GENERAL NOTES

➀ All parameters at 25˚C unless otherwise specified.
➁ Off-State dv/dt test method per EIA/NARM standard RS-443, paragraph 13.11.1
➂ Heat sinking required, for derating curves see page 2.
➃ 24 Vac Input option, E suffix.
➄ Turn-on time for random turn-on versions is 0.02 msec (DC Control Models).
➅ Input circuitry incorporates active current limiter.
➆ No internal snubber.

FastFax Document No.159
SERIES HA/HD60.
Rev. 111303
PAGE 1 OF 3

(D PREFIX) (A PREFIX)➃ (E SUFFIX)

© 2003 CRYDOM CORP, Specifications subject to change without notice.

For recommended applications and more information contact:
USA: Sales Support [phone] Tech Support [phone] FAX [phone]
Crydom Corp, 2320 Paseo de las Americas, Ste. 201, San Diego, CA 92154

Email: [e-mail]
UK: [phone] • FAX [phone] Crydom International Ltd., 7 Cobham
Road, Ferndown Industrial Estate, Ferndown, Dorset BH21 7PE, Email: [e-mail].
GERMANY: [phone]

WEB SITE: http://www.crydom.com

S

eries

25-125

HA/HD

A

m

p

•

600 Vac - AC OUTPU

60

GENERAL SPECIFICATIONS

Dielectric Strength 50/60Hz Input/Output/Base 4000 Vrms

9

Insulation Resistance (Min.) @ 500 Vdc 10
Max. Capacitance Input/Output
Ambient Operating Temperature Range

Ohm

8 pF

-40 to 80˚C

Ambient Storage Temperature Range -40 to 125˚C

MECHANICAL SPECIFICATIONS

Weight: (typical)

3.0 oz. (86.5g)
Encapsulation: Thermally Conductive Epoxy
Terminals: Screws and Saddle Clamps Furnished, Unmounted

T

AVAILABLE OPTIONS

E

24 VAC Input (18-36 Vac)
Example: HA6025E

F Faston Terminals (Up to 50 Amp Models)

Example: HD6050F
Input Status LED.

G

Agencies Approval Pending
Example: HD6050G
Note: Control Voltage Range 4.5-32Vdc
for DC Control Models.

P Internal Overvoltage Protection.

Relay Will Self Trigger Between
900-1200 Vpk. Not Suitable For
Capacitive Loads.
Agencies Approval Pending.
Example: HD6025P

-10 Random Turn-On (AC & DC Control)
Phase Controllable (DC Control)
Example: HD6090-10

H Heat Transfer Pad (Attached)

Example: HD6090H

Ordering System: Combination of the
suffixes should be made in the following order:
EFPG-10.
Example: HA6050EFPG-10

Crydom Heat Sinks offer excellent
thermal management and are per­fectly matched to the load current
ratings of Crydom panel mount
relays. Request Crydom’s Heat Sink
specification sheet for all the details.

MOUNTING
HOLE/SLOT

0.17 (4.3) DIA.

Screw Torque Requirements:

6-32 Screws - 10 in./lbs.,
8-32 and 10-32 Screws - 20in./lbs.
(Screws dry without grease.)

Fastons:

Single pair (up to 25A)
Double pair* (up to 50A).

*

Caution: User must connect to both pairs

(47.5)

BASE PLATE
.125 (3.2)

MOUNTING

MOUNTING
HOLE/SLOT

HOLE/SLOT

0.17 (4.3) DIA.

0.17 (4.3) DIA.

(47.5)

(47.5)

BASE PLATE

BASE PLATE
.125 (3.2)

.125 (3.2)

1.10

(27.9)

.45

(11.4)

OUTPUT

12

1.87

+--

INPUT

1.00

(25.4)

1.80

(45.7)

1.10

1.10

(27.9)

(27.9)

.45

.45

(11.4)

(11.4)

12

OUTPUT

OUTPUT

12

1.87

1.87

4

43

All dimensions are in inches (millimeters)

INPUT

INPUT

1.00

1.00

(25.4)

(25.4)

1.80

1.80

(45.7)

(45.7)

3

1.70

(43.2)

34

1.70

1.70

(43.2)

(43.2)

2.30

(58.4)

6-32 TERMINAL
(2 PLACES)

FASTON TERMINAL

FASTON TERMINAL
.250 X .032 (2 PLCS.)

.250 X .032 (2 PLCS.)

2.30

2.30

(58.4)

(58.4)

FASTON

FASTON
TERMINAL

TERMINAL
.187 X .032

.187 X .032
(2 PLCS.)

(2 PLCS.)

8-32 TERMINAL

(2 PLACES )

.78

(19.8)

.90

(22.9)

.87 REF.

.87 REF.

(22.2)

(22.2)

.78

.78

(19.8)

(19.8)

.90

.90

(22.9)

(22.9)

APPROVALS

UL E116950
CSA LR81689

10143 UG

VDE

FastFax Document No.159
SERIES HA/HD60.
Rev. 111303
PAGE 2 OF 3

© 2003 CRYDOM CORP, Specifications subject to change without

For recommended applications and more information contact:
USA: Sales Support [phone] Tech Support [phone] FAX [phone]
Crydom Corp, 2320 Paseo de las Americas, Ste. 201, San Diego, CA 92154

Email: [e-mail]
UK: [phone] • FAX [phone] Crydom International Ltd., 7 Cobham
Road, Ferndown Industrial Estate, Ferndown, Dorset BH21 7PE, Email: [e-mail].
GERMANY: [phone]

WEB SITE: http://www.crydom.com

notice.