•
T
ria
c Output
•
P
rinted
• I
nternal
•
Z
ero Voltage
C
ircuit
S
nubber
B
oard Mount
S
witching
2-3.5
S
A
eries
m
p
•
120/240 Vac - AC OUTPUT SI
D
2
The D2W Series features an epoxycoated package that provides exceptional environmental protection.
Pinouts are compatible with Series 6
and OAC type I/O modules.
Manufactured in Crydom's ISO 9001
Certified facility for optimum product
performance and reliability.
W
P
CURRENT DERATING CURVE
3.5
3.0
2.5
2.0
1.5
1.0
LOAD CURRENT (AMPS)
0.5
1.18
MAX.
(29.9)
.39 TYP.
(9.9)
All dimensions are in inches (millimeters)
APPR
UL E116950
CSA LR81689
FastFax Document No. 116
SERIES D2W
Rev. 111203
PAGE 1 OF 1
D2W203F
D2W202F
20 40 60 80
AMBIENT TEMPERTURE (¼C)
Max. Load Current vs. Temp.
CONTROL
.200
(5.1)
1.7 MAX.
(43.2)
OVALS
.700
(17.8)
D2W203F-11
.47 MAX.
LOAD
1234
1.100
(27.9)
PIN 1: AC LOAD
PIN 2: AC LOAD
PIN 3: +DC CONTROL
PIN 4: -DC CONTROL
(11.9)
.050
TYP.
(1.3)
.040 (1.0) DIA.
(4 PLACES)
.12
(3.0)
MODEL NO.
PUT SPECIFICATIONS
IN
Control Voltage Range 3-32 Vdc 3-32 Vdc 3-32 Vdc
Nominal Input Impedance 1500 Ohm 1500 Ohm 1500 Ohm
Typical Input Current @ 5 Vdc 3.0 mAdc 3.0 mAdc 3.0 mAdc
Must Turn On Voltage 3.0 Vdc 3.0 Vdc 3.0 Vdc
Must Turn Off Voltage 1.0 Vdc 1.0 Vdc 1.0 Vdc
OUTPUT SPECIFICATION
Operating Voltage Range (47-63 Hz) 24-280 Vrms 24-280 Vrms 24-280 Vrms
Load Current Range .06-2.0 Arms .06-3.0 Arms .06-3.5 Arms
Transient Over-Voltage 600 Vpk 600 Vpk 600 Vpk
Max. Surge Current, (16.6ms) 28 Apk 70 Apk 80 Apk
Min. Off-State dv/dt @ Max. Rated Voltage
Max.Off-State Leakage @ Rated Voltage 8 mArms 8 mArms 8 mArms
Max. On-State Voltage Drop @ Rated Current
Max.Turn-On Time 1/2 cycle 1/2 cycle 1/2 cycle
Max. Turn-Off TIme 1/2 cycle 1/2 cycle 1/2 cycle
Power Factor (Min.) WIth Max. Load 0.5 0.5 0.5
GENERAL SPECIFICATION
Dielectric Strength ➁ 4000 Vrms
Insulation Resistance (Min.) @ 500 Vdc ➁ 10
Max. Capacitance 10 pF
mbient Operating Temperature Range -30 to 80¼C
A
Ambient Storage Temperature Range -30 to 125¼C
MEC
HANICAL
Weight: (typical) 0.6 oz. (17 g)
Encapsulation: Thermally Conductive Epoxy
GENERAL
SPECIFICATION
NOTES
➀
S
➀
S
S
© 2003 CRYDOM CORP, Specifications subject to change without notice.
D2W202
F
D2W203FD2W203F-11
➂ 200 V/µsec 200 V/µsec 200 V/µsec
1.4 Vpk 1.4 Vpk 1.4 Vpk
9
Ohm
➀ All parameters at 25˚C unless otherwise specified.
➁ Dielectric and insulation resistance are measured between input and output.
➂ Off-State dv/dt test method per EIA/NARM standard RS-443.
For recommended applications and more information contact:
USA: Sales Support (877) 502-5500 Tech Support (877) 702-7700 FAX (619) 710-8540
Crydom Corp, 2320 Paseo de las Americas, Ste. 201, San Diego, CA 92154
Email: sales@crydom.com
UK: +44 (0)1202 365070 • FAX +44 (0)1202 365090 Crydom International Ltd., 7 Cobham
Road, Ferndown Industrial Estate, Ferndown, Dorset BH21 7PE, Email: intsales@crydom.com.
GERMANY: +49 (0)180 3000 506
WEB SITE: http://www.crydom.com
Loading...