Crydom Series D06D Data Sheet
Series D06D
60-100Amp • 0-60 Vdc • DC OUTPUT
OUTPUT SPECIFICATIONS
Operating Voltage Range [Vdc]
Max. Load Current 3 [Adc]
Min. Load Current [mA]
Max. Surge Current, [Adc] (10msec)
Max. On-State Voltage Drop @ Rated Current [Vdc]
Thermal Resistance Junction to Case (R
Max On-state Resistance @ Rated Current (R
Max. Off-State Leakage Current @ Rated Voltage [mA]
Max. Turn-On Time [µsec]
Max. Turn-Off Time [msec]
1
MODEL NUMBERS
) [C/W]
θ JC
) [Ohms]
DS-ON
• MOSFET Output
• Low On-State Resistance
High Current Ratings•
• Panel Mount
D06D60
0-60
60
5
180
0.6
0.6
.010
0.1
300
1.0
DC output relays feature MOSFET technology for low on-state resistance,
assuring easy paralleling and switching
capabilities to 100 amps at 60 Vdc.
Lower current models are also available
to 500 Vdc. All models come in
Crydom's standard panel-mount package.
Manufactured in Crydom’s ISO 9001
Certified facility for optimum product
performance and reliability.
D06D80
0-60 0-60
80 100
5
220
0.7
0.47
.008
0.2
300
1.0
D06D100
5
270
0.5
0.32
.005
0.3
300
1.0
INPUT SPECIFICATIONS
Control Voltage Range 3.5-32 Vdc
Maximum Turn-On Voltage 3.5 Vdc
Minimum Turn-Off Voltage 1.0 Vdc
Nominal Input Impedance See Note 4
Maximum Input Current 1.6 mA (5 Vdc), 28 mA (32 Vdc) 4
GENERAL NOTES
1
DC CONTROL
© 2005 CRYDOM CORP, Specifications subject to change without notice.
1 All parameters at 25º C unless otherwise specified.
2 Dielectric strength and insulation resistance are measured between input and output.
3 Heat sinking required, for derating curves see page 2.
4 Input circuitry incorporates active current limiter.
For recommended applications and more information contact:
USA: Sales Support (877) 502-5500 Tech Support (877) 702-7700 FAX (619) 710-8540
Crydom Corp, 2320 Paseo de las Americas, Ste. 201, San Diego, CA 92154
Email: sales@crydom.com WEB SITE: http://www.crydom.com
SERIES D06D.
Rev. 121605
PAGE 1 OF 2
UK: +44 (0)1202 365070 • FAX +44 (0)1202 365090 Crydom International Ltd., 7 Cobham
Road, Ferndown Industrial Estate, Ferndown, Dorset BH21 7PE, Email: intsales@crydom.com.
GERMANY: +49 (0)180 3000 506
MOUNTING
HOLE/SLOT
0.17 (4.3) DIA.
1.87
(47.5)
1.10
(27.9)
.45
(11.4)
--
OUTPUT
INPUT
+
+--
34
12
1.70
(43.2)
2.30
(58.4)
8-32 TERMINAL
(2 PLACES )
Series D06D
60-100Amp • 0-60 Vdc • DC OUTPUT
GENERAL SPECIFICATIONS
Dielectric Strength 60Hz 2500 Vrms
Insulation Resistance (Min.) @ 500 Vdc 109Ohm
Max. Capacitance Input/Output 50 pF
Ambient Operating Temperature Range -30 to 80ºC
Ambient Storage Temperature Range -40 to 125ºC
MECHANICAL SPECIFICATIONS
Weight: (typical) 3.0 oz. (86.5g)
Encapsulation: Thermally Conductive Epoxy
Terminals: Screws and Saddle Clamps Furnished, Unmounted
Input and output polarity must be observed.
Inductive loads must be diode suppressed.
4 (–) 1 (–)
OUTPUT
OUTPUT
OUTPUT
OUTPUT
OUTPUT
OUTPUT
OUTPUT
DC
CONTROL
SOURCE
IN P U T
IN P U T
IN P U T
IN P U T
IN P U T
IN P U T
IN P U T
INPUT
3 (+) 2 (+)
SSR
SSR
SSR
SSR
SSR
SSR
SSR
SSR
OUTPUT
LO A D
LO A D
LO A D
LO A D
LO A D
LO A D
LO A D
LOAD
(–)
(+)
BASE PLATE
.125 (3.2)
1.00
(25.4)
1.80
(45.7)
6-32 TERMINAL
(2 PLACES)
All dimensions are in inches (millimeters)
Screw Torque Requirements: 6-32 Screws - 10 in./lbs., 8-32 and
10-32 Screws - 20in./lbs. (Screws dry without grease.)
D06D60
80
70
60
50
40
30
Power Dissipation [W]
20
10
0
20
0
Load Current [Arms]
60
40
0.5°C/W
1°C/W
2°C/W
3°C/W
No Heatsink
60 80
40
20
Ambient Temperature [°C]
80
90
100
110
120
Power Dissipation [W]
Base Plate Temperature [°C]
(22.9)
100
90
80
70
60
50
40
30
20
10
.78
(19.8)
.90
0
0
40
20
Load Current [Arms]
D06D80
60
80
0.5°C/W
1°C/W
2°C/W
3°C/W
No Heatsink
40
20
Ambient Temperature [°C]
60
Transient Protection
All loads are inductive, even ones that are not so labeled. An
inductive load will produce harmful transient voltages when it
is turned off. The more perfect the switch, the larger the transient voltages; the MOSFET output is so nearly an ideal switch
that the transient voltages produced by seemingly "non-inductive" loads can cause damage if not suppressed. Diodes should
be fast recovery type with PIV rated greater than supply voltage.
D06D100
110
100
90
80
90
100
110
120
80
80
70
60
50
40
Power Dissipation [W]
30
20
Base Plate Temperature [°C]
10
40
20
Load Current [Arms]
60
80
100
Ambient Temperature [°C]
1°C/W
2°C/W
3°C/W
No Heatsink
20
0.5°C/W
40
80
90
100
110
Base Plate Temperature [°C]
120
60
80
SERIES D06D.
Rev. 121605
PAGE 2 OF 2
© 2005 CRYDOM CORP, Specifications subject to change without notice.
For recommended applications and more information contact:
USA: Sales Support (877) 502-5500 Tech Support (877) 702-7700 FAX (619) 710-8540
Crydom Corp, 2320 Paseo de las Americas, Ste. 201, San Diego, CA 92154
Email: sales@crydom.com WEB SITE: http://www.crydom.com
UK: +44 (0)1202 365070 • FAX +44 (0)1202 365090 Crydom International Ltd., 7 Cobham
Road, Ferndown Industrial Estate, Ferndown, Dorset BH21 7PE, Email: intsales@crydom.com.
GERMANY: +49 (0)180 3000 506
Loading...