Crydom Series 1 240 VAC Data Sheet

Page 1
Series 1 240 VAC
Panel Mount
Datasheet
Ratings from 10A to 125A @ 24-280 VAC
SCR output for heavy industrial loads
Zero voltage or instantaneous turn-on outputs
UL/CSA/VDE Approved, CE Compliant to EN60950-1
Improved SEMS screw and washer
AC or DC control
Direct bond copper substrate
EMC compliant to Level 3
Direct power lead frame
Epoxy free design
Redesigned housing with anti-rotation barriers
For Generation 3 datasheet click here
PRODUCT SELECTION
Control Voltage 10A 25A 50A 75A 90A 110A 125A
3-32 VDC D2410 D2425 D2450 D2475 D2490 D24110 D24125 90-280 VAC A2410 A2425 A2450 A2475 A2490 A24110 A24125 18-36 VAC A2410E A2425E A2450E A2475E A2490E A24110E A24125E
AVAILABLE OPTIONS
Control Voltage A: 90-280 VAC D: 4-32 VDC AxxxxE: 18-36 VAC
24
Operating Voltage 24: 24-280 VAC
10
Rated Load Current 10: 10 Amps 25: 25 Amps 50: 50 Amps 75: 75 Amps 90: 90 Amps 110: 110 Amps 125: 125 Amps
EA P G
Overvoltage Protection Blank: Not Included P: Included
K H
(1)
(2)
Input Status LED Blank: Not Included G: Included
Termination Blank: Screw F: Quick Connect
(Up to 50 Amps only)
K: Hex standoffs
Snubber Blank: Not Included S: Included
S
Required for valid part number For options only and not required for valid part number
*
Not all part number combinations are available. Contact Crydom Technical support for information on the availability of a specific part number.
Thermal Pad Blank: Not Included H: Included
Switching Type Blank: Zero Voltage Turn-On
-10: Instantaneous Turn-On
-10
(4)(3)
OUTPUT SPECIFICATIONS
Operating Voltage (47-440Hz) [Vrms] (6) 24-280 24-280 24-280 24-280 24-280 24-280 24-280 Transient Overvoltage [Vpk] 600 600 600 600 600 600 600 Maximum Off-State Leakage Current @ Rated Voltage [mArms] (7) 1 1 1 1 1 1 1 Minimum Off-State dv/dt @ Maximum Rated Voltage [V/µsec] 500 500 500 500 500 500 500 Maximum Load Current [Arms] (2)(8) 10 25 50 75 90 110 125 Minimum Load Current [mArms] 150 150 150 150 150 250 250 Maximum 1 Cycle Surge Current (50/60Hz) [Apk] 115/120 239/250 597/625 954/1000 1145/1200 1432/1500 1670/1750 Maximum On-State Voltage Drop @ Rated Current [Vrms] 1.15 1.15 1.15 1.15 1.15 1.15 1.15 Thermal Resistance Junction to Case (Rjc) [°C/W] 1.03 0.8 0.45 0.3 0.27 0.25 0.22 Maximum 1/2 Cycle I² t for Fusing (50/60Hz) [A² sec] 66/60 285/259 1770/1621 4555/4150 6560/5976 10249/9338 13950/12709 Minimum Power Factor (at Maximum load) (3) 0.5 0.5 0.5 0.5 0.5 0.5 0.5
Copyright © 2016 Crydom Inc. Specifications subject to change without notice.
(5)
125A110A90A75A50A25A10ADescription
Loading...