Crydom H16WD Series Data Sheet

Panel Mount

Datasheet

H16WD Series

• Ratings from 25A to 90A @ 48-690 VAC

• 1600 Volts Blocking

• SCR output for heavy industrial loads

• Zero voltage or instantaneous turn-on outputs

• UL/CSA/VDE Approved, CE Compliant to EN60950-1

• Improved SEMS screw and washer

• Redesigned housing with anti-rotation barriers

For Generation 3 datasheet click here

PRODUCT SELECTION

4-32 Vdc H16WD6025 H16WD6050 H16WD6075 H16WD6090

AVAILABLE OPTIONS

Rated Load Current
25: 25 Amps

Series

Transient Overvoltage
6WD: 1600 Vpk

50: 50 Amps
75: 75 Amps
90: 90 Amps

Input Status LED
Blank: Not Included
G: Included

• DC control

• Direct Bond Copper substrate

• EMC Compliant to Level 3

• Direct Power Lead Frame

• Epoxy Free Design

90A75A50A25AControl Voltage

Switching Type
Blank: Zero Voltage Turn-On

-10: Instantaneous Turn-On

(3)

6WD

Required for valid part number
For options only and not required for valid part number

*

Not all part number combinations are available.
Contact Crydom Technical Support for informacion on
the availability of a specific part number.

OUTPUT SPECIFICATIONS

Description 25A 50A 75A 90A

Operating Voltage (47-440Hz) [Vrms] 48-690 48-690 48-690 48-690
Transient Overvoltage [Vpk] 1600 1600 1600 1600
Rated Load Current [Arms] (5)(2) 25 50 75 90
Rated Load Current {UL508 Motor Controller} [Arms] (5) 10 20 30 45
Minimum Load Current [mArms] 150 150 150 150
Maximum Off-State Leakage Current @ Rated Voltage [mArms] 1.0 1.0 1.0 1.0
Minimum Off-State dv/dt @ Maximum Rated Voltage [V/µsec] 500 500 500 500
Maximum 1 Cycle Surge Current (50/60Hz) [Apk] 239/250 597/625 954/1000 1145/1200
Maximum I²t for Fusing (50/60Hz) [A² sec] 285/259 1779/1621 4555/4150 6560/5976
Thermal Resistance Junction to Case (Rjc) [°C/W] 0.8 0.45 0.3 0.27
Maximum On-State Voltage Drop @ Rated Current [Vrms] 1.3 1.3 1.2 1.2
HP rating UL 508/IEC60947[HP (KW)]: 240 VAC 1.5 (1.1) 3 (2.2) 5 (3.7) 7.5 (5.6)
HP rating UL 508/IEC60947[HP (KW)]: 380 VAC 2 (1.5) 5 (3.7) 7.5 (5.6) 15 (11.2)
HP rating UL 508/IEC60947[HP (KW)]: 480 VAC 3 (2.2) 5 (3.7) 10 (7.4) 20 (14.9)
HP rating UL 508/IEC60947[HP (KW)]: 600 VAC 3 (2.2) 10 (7.4) 15 (11.2) 25 (18.6)
Minimum Power Factor (at Maximum Load) 0.5 0.5 0.5 0.5

(4)

60H1 25 K G H -10

(1)

(2)

Thermal Pad
Blank: Not Included
H: Included

Operating Voltage
60: 48-690 VAC

Termination
Blank: Screw
F: Quick Connect

(Up to 50 Amps models)
K: Hex standoffs

Copyright © 2016 Crydom Inc. Specifications subject to change without notice.