Crydom DRC Series Data Sheet
Solid State Contactor
DataSheet
DRC Series
• 7.6 Amp Motor Controller rated Solid State Contactor
• Load voltage range up to 530VAC
• Fits standard 35mm DIN-RAIL
• LED input status indicator
• AC or DC control
• Zero-crossing (resistive loads) or instantaneous turn-on (inductive loads) output
• C-UL-US Listed, IEC Rated, CE & RoHS Compliant, Horsepower Rated
• Built in Overvoltage Protection
• Ultra-efficient thermal management design (Patented)
Reversing
Start / Stop
Solicon DRC3 Series are Solid State Contactors intended for
frequently switching on and off three phase loads up to 5 HP, 480
VAC 7.6 Amps. They are available in both contactor versions
instantaneous change of direction is commanded, then it will
delay the direction change by 100msec in order to prevent
simultaneous forward and reverse operations.
DRC3P and reversing contactor versions DRC3R.
All the models of Solicon DRC3 Series combine the benefits and
The Solicon Contactor DRC3P is available in either instantaneous
turn-on (for Motor Control) or zero voltage turn-on (for Resistive
Loads). It is available in either 2 or 3 controlled leg versions. The
2 legs control version is particularly suitable for motor control
circuits where the neutral conductor is not utilized.
advantages of a solid state contactor with the functionality and
simplicity of use of an electromechanical contactor thanks to the
proprietary thermal management technology (Patented) and
complete electrical insulation (no grounding required); the
embedded auxiliary contacts, normally open and/or normally
closed are intended to be used at 18-280Vac. Three different
The Solicon Reversing Contactor DRC3R includes an interlock
control that allows only off, forward and reverse operation in a
control voltages are available in order to cover most the
applications. All models include overvoltage protection.
safe mode while providing high space saving; it switches
instantaneously upon application of the control voltage unless an
PRODUCT SELECTION
Control Voltage NO Auxiliary Contact 1 NO+NC Auxiliary Conctat 2 NO Auxiliary Contact
230 VAC DRC3P48A400, DRC3R48A400 DRC3P48A411
120 VAC DRC3P48B400, DRC3R48B400 DRC3P48B411
24 VAC/DC DRC3P48D400, DRC3R48D400 DRC3P48D411
DRC3P48A420, DRC3R48A420
DRC3P48B420, DRC3R48B420
DRC3P48D420, DRC3R48D420
AVAILABLE OPTIONS
Load Current per Phase
4: 7.6 Amp FLA
Series
Operating Voltage
40: 400 VAC
(3R function only)
48: 480 VAC
(x2 Controlled Legs
& 3R function);
4.8 Amp FLA
(x3 Controlled Legs only)
Switching Mode
(3P function only)
Blank: Zero Voltage Turn-On
R: Instantaneous Turn-On
DRC
Required for valid part number
For options only and not required for valid part number
48 D3P
Function
3P: Three Phase
3R: Reversible
Control Voltage
A: 230 VAC
B: 120 VAC
D: 24 VAC/DC
4
00
Auxiliary Contacts,
N.O. - N.C.
00: Not included
11: 1 Solid State Auxiliary
Contact, Normally Open;
1 Solid State Auxiliary
Contact, Normally Closed
(3P function only)
20: 2 Solid State Auxiliary
Contacts, Normally Open
R 2
Do not forget to visit us at: www.crydom.com
Copyright © 2014 Custom Sensors & Technologies. Specifications subject to change without notice.
Controlled Legs
(3P function only)
Blank: 3 Controlled Legs
2: 2 Controlled Legs
Loading...